Abstract:SiC coating was prepared on high-purity graphite using chemical vapor deposition method, and hydrothermal corrosion experiment was conducted to study the relationship between chemical vapor deposition process, coating morphology and structure, and coating hydrothermal corrosion behavior. The results show that with the increase of dilution hydrogen flow rate, the average grain size of the coating decreases, the possibility of free Si appearing in the coating increases, and the resistance to hydrothemal corrosion gradually decreases. As the deposition temperature increases from 1 000 ℃ to 1 300 ℃, the crystallinity and average grain size of the coating first increases and then decreases. The maximum value is obtained at a deposition temperature of 1 200 ℃, and the coating structure and grain morphology remain intact after hydrothermal corrosion. As the temperature of the methyltrichlorosilane water bath increases, the average grain size of the coating increases. The coating prepared at a water bath temperature of 50 ℃ has the worst crystallinity and is the most severely corroded.
毛健, 陈招科, 徐振男, 熊翔. 化学气相沉积SiC涂层的制备及水热腐蚀行为[J]. 粉末冶金材料科学与工程, 2024, 29(5): 373-383.
MAO Jian, CHEN Zhaoke, XU Zhennan, XIONG Xiang. Preparation and hydrothermal corrosion behavior of SiC coating by chemical vapor deposition. Materials Science and Engineering of Powder Metallurgy, 2024, 29(5): 373-383.
[1] M W J, KIM D, PARK J Y. Fabrication and material issues for the application of SiC composites to LWR fuel cladding[J]. Nuclear Engineering Technology, 2013, 45(4): 565-572. [2] 刘荣正, 刘马林, 邵友林, 等. 碳化硅材料在核燃料元件中的应用[J]. 材料导报, 2015, 29(1): 1-5. LIU Rongzheng, LIU Malin, SHAO Youlin, et al.Application of silicon carbide in nuclear fuel elements[J]. Materials Guide, 2015, 29(1): 1-5. [3] OTT L J, ROBB K R, WANG D.Preliminary assessment of accident-tolerant fuels on LWR performance during normal operation and under DB and BDB accident conditions[J]. Journal of Nuclear Materials, 2014, 448(1/2/3): 520-533. [4] KATOH Y, SNEAD L L, HENAGER C H, et al.Current status and recent research achievements in SiC/SiC composites[J]. Journal of Nuclear Materials, 2014, 455(1/2/3): 387-397. [5] SNEAD L, NOZAWA T, FERRARIS M, et al.Silicon carbide composites as fusion power reactor st [6] ructural materials[J]. Journal of Nuclear Materials, 2011, 417(1/2/3): 330-339. [7] YUEH K, TERRANI K A.Silicon carbide composite for light water reactor fuel assembly applications[J]. Journal of Nuclear Materials, 2014, 448(1/2/3): 380-388. [8] PARK D J, JUNG Y I, KIM H G, et al.Oxidation behavior of silicon carbide at 1 200 ℃ in both air and water-vapor-rich environments[J]. Corrosion Science, 2014, 88: 416-422. [9] 程亮, 张鹏程. 典型事故容错轻水堆燃料包壳候选材料SiCf/SiC复合材料和Mo合金的研究进展[J]. 材料导报, 2018, 32(13): 2161-2166. CHENG Liang, ZHANG Pengcheng.SiCf/SiC composites and molybdenum alloys: the promising candidate materials for typical accident tolerant fuel cladding of light water reactors[J]. Materials Guide, 2018, 32(13): 2161-2166. [10] HALLSTADIUS L, JOHNSON S, LAHODA E.Cladding for high performance fuel[J]. Progress in Nuclear Energy, 2012, 57: 71-76. [11] KOYANAGJ T, KATOH Y, TERRANI K A, et al.Hydrothermal corrosion of silicon carbide joints without radiation[J]. Journal of Nuclear Materials, 2016, 481: 226-233. [12] LEE Y, KAZIMI M S.A structural model for multi-layered ceramic cylinders and its application to silicon carbide cladding of light water reactor fuel[J]. Journal of Nuclear Materials, 2015, 458: 87-105. [13] PARK J Y, KIM I H, JUNG Y I, et al.Long-term corrosion behavior of CVD SiC in 360 ℃ water and 400 ℃ steam[J]. Journal of Nuclear Materials, 2013, 443(1/2/3): 603-607. [14] KIM D, LEE H J, JANG C, et al.Influence of microstructure on hydrothermal corrosion of chemically vapor processed SiC composite tubes[J]. Journal of Nuclear Materials, 2017, 492: 6-13. [15] LOBACH K, SAYENKO S Y, SHKUROPATENKO V, et al.Corrosion resistance of ceramics based on SiC under hydrothermal conditions[J]. Materials Science, 2020, 55: 672-682. [16] HIRAYAMA H, KAWAKUBO T, GOTO A, et al.Corrosion behavior of silicon carbide in 290 ℃ water[J]. Journal of the American Ceramic Society, 1989, 72(11): 2049-2053. [17] DOYLE P J, ZINKLE S, RAIMAN S S.Hydrothermal corrosion behavior of CVD SiC in high temperature water[J]. [18] Journal of Nuclear Materials, 2020, 539: 152241. [19] KIM D, LEE H G, PARK J Y, et al.Effect of dissolved hydrogen on the corrosion behavior of chemically vapor deposited SiC in a simulated pressurized water reactor environment[J]. Corrosion Science, 2015, 98: 304-309. [20] DECK C, JACOBSEN G, SHEEDER J, et al.Characterization of SiC-SiC composites for accident tolerant fuel cladding[J]. Journal of Nuclear Materials, 2015, 466: 667-681. [21] 刘俊凯, 张新虎, 恽迪. 事故容错燃料包壳候选材料的研究现状及展望[J]. 材料导报, 2018, 32(11): 1757-1778. LIU Junkai, ZHANG Xinhu, YUN Di.A complete review and a prospect on the candidate materials for accident-tolerant fuel claddings[J]. Materials Science, 2018, 32(11): 1757-1778. [22] TAN L, ALLEN T, BARRINGER E.Effect of microstructure on the corrosion of CVD-SiC exposed to supercritical water[J]. Journal of Nuclear Materials, 2009, 394(1): 95-101. [23] LEE Y J, JOO H J, RADOVIC L R.Preferential distribution and oxidation inhibiting/catalytic effects of boron in carbon fiber reinforced carbon (CFRC) composites[J]. Carbon, 2003, 41(13): 2591-2600. [24] FU Q, LI H, SHI X, et al.Effect of depositing position on microstructure of SiC coating by chemical vapor deposition[J]. Journal of Xi’an Jiaotong University, 2005, 39(1): 49-52. [25] SHIN J H, KIM D, LEE H G, et al.Factors affecting the hydrothermal corrosion behavior of chemically vapor deposited silicon carbides[J]. Journal of Nuclear Materials, 2019, 518: 350-356. [26] KIM W J, HWANG H S, PARK J Y.Corrosion behavior of reaction-bonded silicon carbide ceramics in high-temperature water[J]. Journal of Materials Science Letters, 2002, 21(9): 733-735. [27] YANG H, LI X Q, LIU C X, et al.Hydrothermal corrosion behavior of SiCf/SiC composites candidate for PWR accident tolerant fuel cladding[J]. Ceramics International, 2018, 44(18): 22865-22873.