Effect of plasma boriding on diamond coating of cemented carbide surface
DING Sheng1, WANG Hailong2, MA Li1, WEI Qiuping1,2
1. State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China; 2. School of Materials Science and Engineering, Central South University, Changsha 410083, China
Abstract:After plasma boriding pretreatment, the diamond coating was deposited onto the surface of cemented carbide through hot filament chemical vapor deposition. The effects of pretreatmens on the growth quality and bonding properties of the diamond coating were investigated using scanning electron microscope, X-ray diffractometer, Raman spectrometer, and Rockwell hardness tester. The results indicate that as the plasma boriding temperature increases, CoWB content of the substrates surface increases while WC undergoes decarburization to form W. Plasma bombarding can increase the surface defect density of substrate and improve the nucleation rate of diamond. CoWB passivation layer and W transition layer can inhibit Co atom diffusion and improve the growth quality of diamond. Compared with an acid and alkali two-step method, the graphite phase content of diamond coating on cemented carbide surface after plasma boriding is significantly reduced, and the residual stress decreases with the increase of plasma boriding temperature. The reduction of graphite phase content and residual stress can improve the bonding properties between diamond coating and cemented carbide substrate, after pretreatment at 1 000 ℃, the bonding force of diamond coating on cemented carbide surface can reach the level of HF1.
[1] LIU X W, ZHANG H, LIN G L, et al.Advances in deposition of diamond films on cemented carbide and progress of diamond coated cutting tools[J]. Vacuum, 2023, 217: 112562. [2] QIAO Y, NIE S Y, LI W H, et al.Cobalt diffusion during the initial stage of CVD diamond growth on cemented carbide: a molecular dynamics and experimental study[J]. Applied Surface Science, 2023, 633: 157589. [3] HE M L, ZHENG X Y, TIAN H X, et al.Residual thermal stress, fracture toughness, and hardness in WC-Co cemented carbide: finite element simulation and experimental verification[J]. Journal of Materials Research and Technology, 2022, 21: 2445-2454. [4] WANG X C, WANG C C, HE W K, et al.Co evolutions for WC-Co with different Co contents during pretreatment and HFCVD diamond film growth processes[J]. Transactions of Nonferrous Metals Society of China, 2018, 28(3): 469-486. [5] SUN F H, ZHANG Z M, CHEN M, et al.Improvement of adhesive strength and surface roughness of diamond films on Co-cemented tungsten carbide tools[J]. Diamond and Related Materials, 2003, 12(3): 711-718. [6] TANG W, WANG S, LU F.Preparation and performance of diamond coatings on cemented carbide inserts with cobalt boride interlayers[J]. Diamond and Related Materials, 2000, 9(9): 1744-1748. [7] TIAN Q Q, HUANG N, YANG B, et al.Diamond/β-SiC film as adhesion-enhanced interlayer for top diamond coatings on cemented tungsten carbide substrate[J]. Journal of Materials Science & Technology, 2017, 33(10): 1097-1106. [8] ULLRAM S, HAUBNER R.Temperature pre-treatments of hardmetal substrates to reduce the cobalt content and improve diamond deposition[J]. Diamond and Related Materials, 2006, 15(4): 994-999. [9] RAMASUBRAMANIAN K, ARUNACHALAM N, RAO M S R. Investigation on tribological behaviour of boron doped diamond coated cemented tungsten carbide for cutting tool applications[J]. Surface and Coatings Technology, 2017, 332: 332-340. [10] YAN G Y, WU Y H, CRISTEA D, et al.Machining performance of hard-brittle materials by multi-layer micro-nano crystalline diamond coated tools[J]. Results in Physics, 2019, 13: 102303. [11] CEN H, DU Q B, DENG F M, et al.Effects of hydrogen plasma etching on adhesive strength of diamond coating with cemented carbide substrate[J]. International Journal of Refractory Metals and Hard Materials, 2024, 120: 106612. [12] YI M K, DENG B, XIAO H, et al.Gaseous boronizing pretreatment for the deposition of nanocrystalline diamond films on cemented carbide substrates[J]. Materials Research Express, 2019, 6(7): 076404. [13] 余寒, 夏鑫, 朱俊奎, 等. 籽晶种植及掺硼形核对硬质合金表面金刚石涂层的影响[J]. 粉末冶金材料科学与工程, 2023, 28(4): 404-412. YU Han, XIA Xin, ZHU Junkui, et al.Effect of seed crystal planting and boron-doped shape check on diamond coating on cemented carbide surface[J]. Materials Science and Engineering of Powder Metallurgy, 2023, 28(4): 404-412. [14] VIDAKIS N, ANTONIADIS A, BILALIS N.The VDI 3198 indentation test evaluation of a reliable qualitative control for layered compounds[J]. Journal of Materials Processing Technology, 2003, 143: 481-485. [15] SHEN X T, WANG X C, SUN F H, et al.Sandblasting pretreatment for deposition of diamond films on WC-Co hard metal substrates[J]. Diamond and Related Materials, 2017, 73: 7-14. [16] WEI Q P, YU Z M, ASHFOLD M N R, et al. Synthesis of micro- or nano-crystalline diamond films on WC-Co substrates with various pretreatments by hot filament chemical vapor deposition[J]. Applied Surface Science, 2010, 256(13): 4357-4364. [17] 吕反修. 金刚石膜制备与应用[M]. 北京: 科学出版社, 2014: 96-97. LÜ Fanxiu.Preparation and Application of Diamond Film[M]. Beijing: Science Press, 2014: 96-97. [18] JOHNSTON J M, BAKER P, CATLEDGE S A.Improved nanostructured diamond adhesion on cemented tungsten carbide with boride interlayers[J]. Diamond and Related Materials, 2016, 69: 114-120. [19] JOHNSTON J M, CATLEDGE S A.Metal-boride phase formation on tungsten carbide (WC-Co) during microwave plasma chemical vapor deposition[J]. Applied Surface Science, 2016, 364: 315-321. [20] SAIKI Y, BANDO T, HARIGAI T, et al.Sequential morphology of cobalt from cemented tungsten carbide in microcrystalline and nanocrystalline diamond films by HF-CVD[J]. Diamond and Related Materials, 2023, 132: 109643. [21] 代明江, 王德政, 周克崧, 等. 等离子体刻蚀处理对金刚石膜结合性能影响的研究[J]. 广东有色金属学报, 1999, 9(1): 47-52. DAI Mingjiang, WANG Dezheng, ZHOU Kesong, et al.Study on the effect of plasma etching treatment on the bonding properties of diamond films[J]. Journal of Guangdong Non-Ferrous Metals, 1999, 9(1): 47-52. [22] 花腾宇, 夏鑫, 马莉, 等. 硬质合金晶粒度对其表面金刚石涂层的影响[J]. 粉末冶金材料科学与工程, 2023, 28(2): 180-191. HUA Tengyu, XIA Xin, MA Li, et al.Effect of grain size on diamond coating of cemented carbide[J]. Materials Science and Engineering of Powder Metallurgy, 2023, 28(2): 180-191. [23] TANG W, WANG Q, WANG S, et al.Adherent diamond coatings on cemented carbide substrates with different cobalt contents[J]. Diamond and Related Materials, 2001, 10(9): 1700-1704. [24] RALCHENKO V G, SMOLIN A A, PEREVERZEV V G, et al.Diamond deposition on steel with CVD tungsten intermediate layer[J]. Diamond and Related Materials, 1995, 4(5): 754-758. [25] LESPADE P, AL-JISHI R, DRESSELHAUS M S.Model for Raman scattering from incompletely graphitized carbons[J]. Carbon, 1982, 20(5): 427-431. [26] ZHANG J B, WANG J P, ZHANG G Q, et al.A review of diamond synthesis, modification technology, and cutting tool application in ultra-precision machining[J]. Materials & Design, 2024, 237: 112577. [27] ZHANG Y F, ZHANG F, GAO Q J, et al.The roles of argon addition in the hot filament chemical vapor deposition system[J]. Diamond and Related Materials, 2001, 10(8): 1523-1527. [28] FERRARI A C, ROBERTSON J.Origin of the 1 150 cm-1 Raman mode in nanocrystalline diamond[J]. Physical Review B, 2001, 63(12): 121405. [29] HADDAD M, KURTULUS O, MERTENS M, et al.Optimization of residual stresses inside diamond thin films grown by hot filament chemical vapor deposition (HFCVD)[J]. Diamond and Related Materials, 2023, 131: 109564. [30] WINDISCHMANN H, EPPS G F, CONG Y, et al.Intrinsic stress in diamond films prepared by microwave plasma CVD[J]. Journal of Applied Physics, 1991, 69(4): 2231-2237. [31] FERREIRA N G, ABRAMOF E, LEITE N F, et al.Analysis of residual stress in diamond films by X-ray diffraction and micro-Raman spectroscopy[J]. Journal of Applied Physics, 2002, 91(4): 2466-2472. [32] LEI X L, SHEN B, CHEN S L, et al.Tribological behavior between micro- and nano-crystalline diamond films under dry sliding and water lubrication[J]. Tribology International, 2014, 69: 118-127.