Abstract：The mixed powders of WC-6Co-GO/Al2O3 were prepared by mechanical ball milling method and ball milling-ultrasonic-freeze-drying method, respectively, and the bulk cemented carbide was prepared by cold press forming-sintering. The effects of the mixing process and the content of GO/Al2O3 composite particles on the dispersion of the mixed powders and the microscopic morphology, density and mechanical properties of the alloy were studied. The results show that ultrasonic freeze-drying can effectively solve the agglomeration problem of GO/Al2O3 composite particles and obtain fine uniform powder particles. In the prepared cemented carbide with the mass fraction of GO/Al2O3 composite particles of 0.15% when mixing powder by ball milling-ultrasonic- freeze-drying method, the composite particles are uniformly distributed among the WC grains to make the effect of refining the grains more significant, and the relative density of the alloy is higher, and the strength of the alloy increases to 2 723.6 MPa, which is about 600 MPa higher than that of the alloy with ordinary mechanical ball milling, and the hardness (HV30) and toughness also increase by about 200.0 and 1.0 MPa∙m1/2, respectively.
张振, 苏武丽, 孙兰. 超声冷冻干燥混粉工艺对WC-6Co-GO/Al2O3硬质合金组织及性能的影响[J]. 粉末冶金材料科学与工程, 2023, 28(4): 338-346.
ZHANG Zhen, SU Wuli, SUN Lan. Effects of powder mixing process by ultrasonic freeze-drying method on the microstructure and properties of WC-6Co-Go/Al2O3 cemented carbide. Materials Science and Engineering of Powder Metallurgy, 2023, 28(4): 338-346.
[1] 黄伯云, 韦伟峰, 李松林, 等. 现代粉末冶金材料与技术进展[J]. 中国有色金属学报, 2019, 29(9): 1917-1933. HUANG Boyun, WEI Weifeng, LI Songlin, et al.Development of modern powder metallurgy materials and technology[J]. The Chinese Journal of Nonferrous Metals, 2019, 29(9): 1917-1933. [2] BONACHE V, SALVADOR M D, ROCHA V G, et al.Microstructural control of ultrafine and nanocrystalline WC-12Co-VC/Cr3C2 mixture by spark plasma sintering[J]. Ceramics International, 2011, 37(3): 1139-1142. [3] SOLEIMANPOUR A M, ABACHI P, SIMCHI A.Microstructure and mechanical properties of WC-10Co cemented carbide containing VC or (Ta,Nb)C and fracture toughness evaluation using different models[J]. International Journal of Refractory Metals and Hard Materials, 2012, 31(2): 141-146. [4] 王春光, 张立, 黄祥, 等. 合金添加剂对WC基硬质合金氧化行为及其关联特性的影响[J]. 粉末冶金材料科学与工程, 2023, 28(3): 296-304. WANG Chunguang, ZHANG Li, HUANG Xiang, et al.Effects of alloy additives on oxidation behavior and correlative characteristics of WC-based cemented carbides[J]. Materials Science and Engineering of Powder Metallurgy, 2023, 28(3): 296-304. [5] SU W L, ZOU J, SUN L.Effects of nano-alumina on mechanical properties and wear resistance of WC-8Co cemented carbide by spark plasma sintering[J]. International Journal of Refractory Metals and Hard Materials, 2020, 92(7): 105337. [6] NOVOSELOV K S, FAL’KO V I, COLOMBO L, et al. A roadmap for graphene[J]. Nature, 2012, 490(7419): 192-200. [7] SHARIFI T, XIE Y, ZHANG X, et al.Graphene as an electrochemical transfer layer[J]. Carbon, 2019, 141(1): 266-273. [8] BODIS E, CORA I, BALAZI C, et al.Spark plasma sintering of graphene reinforced silicon carbide ceramics[J]. Ceramics International, 2017, 43(12): 9005-9011. [9] MAZILOVA T I, SADANOV E V, MIKHAILOVSKIJ I M.Tensile strength of graphene nanoribbons: an experimental approach[J]. Materials Letters, 2019, 242(9): 17-19. [10] SU W L, LI S, SUN L.Effect of multilayer graphene as a reinforcement on mechanical properties of WC-6Co cemented carbide[J]. Ceramics international, 2020, 46(10): 15392-15399. [11] SUN J L, ZHAO J, GONG F, et al.Design, fabrication and characterization of multi-layer graphene reinforced nanostructured functionally graded cemented carbides[J]. Journal of Alloys and Compounds, 2018, 750(21): 972-979. [12] SU W L, ZOU J, LI S, et al.Mechanical properties of low- pressure sintered WC-6Co cemented carbide doped with graphene oxide/alumina composite particles[J]. Ceramics International, 2021, 47(12): 16528-16537. [13] 翟立力, 席晓丽, 童培云, 等. 冷冻干燥技术在新材料领域中的应用[J]. 材料导报, 2006, 20(8): 104-106. ZHAI Lili, XI Xiaoli, TONG Peiyun, et al.The application of freeze drying in advanced materials[J]. Materials Reports, 2006, 20(8): 104-106. [14] FAN Y C, IGARASHI G, JIANG W, et al.Highly strain tolerant and tough ceramic composite by incorporation of graphene[J]. Carbon, 2015, 90(10): 274-283. [15] 中国有色金属工业协会. 硬质合金显微组织的金相测定:第2部分 WC晶粒尺寸的测量: GB/T 3488.2—2018[S]. 北京: 中国标准出版社, 2018. Nonferrous Metals Industry Association of China. Hardmetals metallographic determination of microstructure: part 2 measurement of WC grain size: GB/T 3488.2—2018 [S]. Beijing: Standards Press of China, 2018. [16] DMYTRO D, ANDREY R, DINESH A.Initial stage sintering of binderless tungsten carbide powder under microwave radiation[J]. Ceramics International, 2010, 37(2): 505-512. [17] 李金普, 施瑜蕾, 柳学全, 等. 低压烧结温度对WC-6Ni无磁硬质合金性能的影响[J]. 粉末冶金工业, 2021, 31(1): 46-50. LI Jinpu, SHI Yulei, LIU Xuequan, et al.Effects of sintering temperatures on performance of WC-6Ni non-magnetic cemented carbide by sinter-HIP[J]. Powder Metallurgy Industry, 2021, 31(1): 46-50. [18] 李志和, 段石田, 汪德根, 等. WC-Co硬质合金组织结构对断裂韧性和断裂影响的研究[J]. 钢铁研究总院学报, 1985(S1): 101-110. LI Zhihe, DUAN Shitian, WANG Degen, et al.Influence of structures on fracture and fracture toughness of WC-Co composites[J]. Central Iron and Steel Research Institute Technical Bulletin, 1985(S1): 101-110.
2023, Vol. 28 
