2025年05月02日 星期五 首页   |   期刊介绍   |   编 委 会   |   投稿指南   |   出版法规   |   出版伦理   |   期刊订阅   |   联系我们   |   留言板   |   广告合作   |   ENGLISH
粉末冶金材料科学与工程  2024, Vol. 29 Issue (3): 172-180    DOI: 10.19976/j.cnki.43-1448/TF.2024028
  理论研究 本期目录 | 过刊浏览 | 高级检索 |
钛合金粉末叶轮盘热等静压成形性能
何山, 蔡高参, 潘昱枫
浙江理工大学 机械工程学院,杭州 310018
Hot isostatic pressing forming performance of titanium alloy powder impeller disc
HE Shan, CAI Gaoshen, PAN Yufeng
School of Mechanical Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China
全文: PDF (694 KB)   HTML (0 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 对钛合金粉末热等静压成形叶轮盘进行数值模拟分析,研究其等效塑性应变分布和节点密度随时间的变化规律,以及压制件相对密度分布规律,并采用热等静压技术制备叶轮盘样件。结果表明:数值模拟结果与实验数据呈现较好的一致性。这一发现充分证明了数值模拟技术在叶轮盘热等静压工艺过程中的有效性,以及预测成形特性的准确性。这不仅为优化叶轮盘的生产工艺提供了有力的数据支持,也为后续复杂零件的成形预测奠定了坚实基础。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
何山
蔡高参
潘昱枫
关键词 热等静压叶轮盘数值模拟钛合金塑性应变    
Abstract:Numerical simulation analysis was conducted on the hot isostatic pressing of titanium alloy powder to form impeller discs. The distribution of equivalent plastic strain and the variation of node density over time, as well as the distribution of relative density of pressed parts were studied, and impeller disc samples were prepared using hot isostatic pressing technology. The results show that the numerical simulation results show good consistency with the experimental data. This discovery fully demonstrates the effectiveness of numerical simulation technology in the hot isostatic pressing process of impeller discs, and the accuracy of predicting the forming characteristics. This not only provides strong data support for optimizing the production process of impeller discs, but also lays a solid foundation for the subsequent prediction of complex parts.
Key wordshot isostatic pressing    impeller disc    numerical simulation    titanium alloy    plastic strain
收稿日期: 2024-03-26      出版日期: 2024-08-12
ZTFLH:  TG146.2  
基金资助:浙江理工大学青年创新专项项目(22242297-Y); 浙江省自然科学基金资助项目(LQ18E050010); 中国博士后基金资助项目(2018M642482)
通讯作者: 蔡高参,副教授,博士。电话:18612183718;E-mail: caigaocan@zstu.edu.cn   
引用本文:   
何山, 蔡高参, 潘昱枫. 钛合金粉末叶轮盘热等静压成形性能[J]. 粉末冶金材料科学与工程, 2024, 29(3): 172-180.
HE Shan, CAI Gaoshen, PAN Yufeng. Hot isostatic pressing forming performance of titanium alloy powder impeller disc. Materials Science and Engineering of Powder Metallurgy, 2024, 29(3): 172-180.
链接本文:  
http://pmbjb.csu.edu.cn/CN/10.19976/j.cnki.43-1448/TF.2024028     或     http://pmbjb.csu.edu.cn/CN/Y2024/V29/I3/172
版权所有 © 《粉末冶金材料科学与工程》编辑部
地址:长沙市麓山南路中南大学粉末冶金研究院 邮编:410083 电话:0731-88877163 邮箱:pmbjb@csu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn