2025年05月07日 星期三 首页   |   期刊介绍   |   编 委 会   |   投稿指南   |   出版法规   |   出版伦理   |   期刊订阅   |   联系我们   |   留言板   |   广告合作   |   ENGLISH
粉末冶金材料科学与工程  2022, Vol. 27 Issue (2): 187-195    DOI: 10.19976/j.cnki.43-1448/TF.2021106
  工艺技术 本期目录 | 过刊浏览 | 高级检索 |
C/C-SiC-Cu复合材料的弯曲性能
白凯伦, 张欢, 尹健, 熊翔, 张红波, 谢冯旻煜
中南大学 粉末冶金国家重点实验室,长沙 410083
Flexural property of C/C-SiC-Cu composites
BAI Kailun, ZHANG Huan, YIN Jian, XIONG Xiang, ZHANG Hongbo, XIE Fengminyu
State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China
全文: PDF (941 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 以炭纤维无纬布/网胎针刺整体毡为增强体,先采用化学气相渗透法(chemical vapor infiltration, CVI)沉积热解炭制备C/C多孔体,之后使用CVI沉积SiC和压力熔渗Cu制备C/C-SiC-Cu复合材料。研究C/C多孔体密度和SiC含量(体积分数φ,下同)对C/C-SiC-Cu复合材料弯曲性能的影响。结果表明,随着C/C多孔体密度和SiC含量增加,热解炭和SiC在炭纤维周围形成具有较高结合强度的界面,二者的增强作用得以充分发挥,C/C-SiC-Cu复合材料的抗弯强度显著增加。弯曲断裂时,热解炭和SiC基体对炭纤维的拔出有抑制作用,C/C-SiC-Cu复合材料的载荷-位移曲线呈起伏台阶式下降,表现出明显的假塑性断裂特征。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
白凯伦
张欢
尹健
熊翔
张红波
谢冯旻煜
关键词 C/C-SiC-Cu复合材料C/C多孔体SiC微观结构抗弯强度    
Abstract:Using carbon non-woven fabric/fibre web as the reinforcements, porous C/C composites were prepared by chemical vapor infiltration (CVI) deposition of pyrolytic carbon, and then SiC was deposited by CVI and Cu was infiltrated under pressure successively. Fianlly, C/C-SiC-Cu composites were obained. The effects of density of porous C/C composites and SiC contents (volume fraction φ, the same below) on the flexural property of C/C-SiC-Cu composites were investigated, respectively. The results show that with the increase of porous C/C composites density and SiC content, pyrolytic carbon and SiC form an interface with high binding strength around carbon fibers, and the strengthening effect of them can be fully played. So the flexural strength of C/C-SiC-Cu composites significantly increase. When the bending process is carried out, pyrolytic carbon and SiC matrix can inhibit the pullout of carbon fibers. The flexural load-displacement curve of C/C-SiC-Cu composites is ups and downs step-like, showing obvious characteristics of pseudoplastic fracture.
Key wordsC/C-SiC-Cu composites    porous C/C composite    SiC    microstructure    flexural strength
收稿日期: 2021-12-08      出版日期: 2022-05-07
ZTFLH:  TB332  
基金资助:国家自然科学基金联合基金重点项目(U19A2099)
通讯作者: 尹健,副研究员,博士。电话:13974827640;E-mail: ctjyin@hotmail.com   
引用本文:   
白凯伦, 张欢, 尹健, 熊翔, 张红波, 谢冯旻煜. C/C-SiC-Cu复合材料的弯曲性能[J]. 粉末冶金材料科学与工程, 2022, 27(2): 187-195.
BAI Kailun, ZHANG Huan, YIN Jian, XIONG Xiang, ZHANG Hongbo, XIE Fengminyu. Flexural property of C/C-SiC-Cu composites. Materials Science and Engineering of Powder Metallurgy, 2022, 27(2): 187-195.
链接本文:  
http://pmbjb.csu.edu.cn/CN/10.19976/j.cnki.43-1448/TF.2021106     或     http://pmbjb.csu.edu.cn/CN/Y2022/V27/I2/187
版权所有 © 《粉末冶金材料科学与工程》编辑部
地址:长沙市麓山南路中南大学粉末冶金研究院 邮编:410083 电话:0731-88877163 邮箱:pmbjb@csu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn