2025年04月06日 星期日 首页   |   期刊介绍   |   编 委 会   |   投稿指南   |   出版法规   |   出版伦理   |   期刊订阅   |   联系我们   |   留言板   |   广告合作   |   ENGLISH
粉末冶金材料科学与工程  2018, Vol. 23 Issue (1): 25-31    
  工艺技术 本期目录 | 过刊浏览 | 高级检索 |
镍基粉末高温合金的微观组织与低周疲劳性能
吴程鑫, 王子, 江亮
中南大学 粉末冶金国家重点实验室,长沙 410083
Microstructure and low cycle fatigue behavior of P/M nickel-based superalloy
WU Chengxin, WANG Zi, JIANG Liang
State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China
全文: PDF (1315 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 以镍基合金粉末为原料,通过热等静压与热挤压以及1 130 ℃/1 h条件下热处理,制备一种新型镍基粉末冶金高温合金,在750 ℃大气环境下对该合金进行低周疲劳试验,分析合金疲劳前的微观组织、低周疲劳循环应力响应行为和断口形貌。结果表明,镍基合金粉末经过热等静压后,出现原始颗粒边界,主要为粗大的γ′相和细小的碳氧化物。热等静压坯体经过热挤压并进一步热处理后,原始颗粒边界消失,晶粒细化到7.5 μm左右,合金的γ′相主要有3类:晶界上的粗大γ′相、晶内近球形的中等尺寸γ′相和弥散分布的球形细小γ′相。该合金的低周疲劳断裂方式以沿晶断裂为主,断裂面的晶粒表面有不同程度的氧化。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
吴程鑫
王子
江亮
关键词 镍基高温合金热等静压高温低周疲劳微观组织    
Abstract:A new Ni based powder metallurgy superalloy was prepared by hot isostatic pressing, hot extrusion (HE) and 1 130 ℃/1 h heat treatment using Ni based alloy powder as raw material. The low cycle fatigue behavior including the microstructure of the pristine alloy, cyclic stress response and fracture morphology of the alloy were studied by a LCF test under atmospheric environment at 750 ℃. The results indicate that the previous particle boundary (PPB) appears after hot isostatic pressing, which is mainly consisted of coarse γ′ and fine carbon oxides. After HE and heat treatment, PPB disappears and grains refine to 7.5 μm. There are three types of γ′ phase after heat treatment, coarse γ′ phase on boundary, nearly spherical medium size γ′ phase and dispersed fine spherical γ′ phase intragranular. The low cycle fatigue fracture mode of the alloy is mainly intergranular fracture, and the grain surface of the fracture surface has different degree of oxidation.
Key wordsnickel-based    super alloy    hot isostatic pressing    high temperature low cycle fatigue    microstructure
收稿日期: 2017-03-09      出版日期: 2019-07-11
ZTFLH:  TG146  
基金资助:国家高技术研究发展计划资助项目(2012AA03A514); 国家自然科学基金资助项目(51401242,612713546,5120531)
通讯作者: 江亮,教授,博士。电话:18673171253;E-mail: liang.jiang@csu.edu.cn   
引用本文:   
吴程鑫, 王子, 江亮. 镍基粉末高温合金的微观组织与低周疲劳性能[J]. 粉末冶金材料科学与工程, 2018, 23(1): 25-31.
WU Chengxin, WANG Zi, JIANG Liang. Microstructure and low cycle fatigue behavior of P/M nickel-based superalloy. Materials Science and Engineering of Powder Metallurgy, 2018, 23(1): 25-31.
链接本文:  
http://pmbjb.csu.edu.cn/CN/     或     http://pmbjb.csu.edu.cn/CN/Y2018/V23/I1/25
版权所有 © 《粉末冶金材料科学与工程》编辑部
地址:长沙市麓山南路中南大学粉末冶金研究院 邮编:410083 电话:0731-88877163 邮箱:pmbjb@csu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn