2025年05月09日 星期五 首页   |   期刊介绍   |   编 委 会   |   投稿指南   |   出版法规   |   出版伦理   |   期刊订阅   |   联系我们   |   留言板   |   广告合作   |   ENGLISH
粉末冶金材料科学与工程  2023, Vol. 28 Issue (2): 192-202    DOI: 10.19976/j.cnki.43-1448/TF.2022054
  工艺技术 本期目录 | 过刊浏览 | 高级检索 |
氩气雾化Sc、Y微合金化René104镍基高温合金粉末的组织与性能
曹镔, 刘祖铭, 王建川, 魏冰, 周欢, 张亚洲
中南大学 粉末冶金国家重点实验室,长沙 410083
Microstructure and properties of Sc, Y microalloyed René104 nickel-based superalloy powders prepared by argon atomization
CAO Bin, LIU Zuming, WANG Jianchuan, WEI Bing, ZHOU Huan, ZHANG Yazhou
State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China
全文: PDF (1141 KB)   HTML (0 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 采用氩气雾化法制备Sc、Y微合金化René104镍基高温合金粉末,分析粉末的粒径分布、形貌、显微组织与性能。结果表明:氩气雾化粉末球形度高,卫星粉和异形粉少,粒径小于53 μm的粉末收得率(质量分数)高达52.52%。粉末内部结构致密,显微组织为等轴晶+树枝晶,晶界处出现Ti、Nb、Ta、Mo元素的偏析。经过Sc、Y微合金化的René104镍基高温合金雾化粉末性能得到改善,流动性好,松装密度高,显微硬度、纳米硬度(HV)和弹性模量分别达到360±6、(6.5±0.4) GPa和(102.1±10.6) GPa。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
曹镔
刘祖铭
王建川
魏冰
周欢
张亚洲
关键词 氩气雾化镍基高温合金微合金化显微组织粉末性能    
Abstract:Sc, Y microalloyed René104 nickel-based superalloy powders were prepared by argon atomization. The particle size distribution, morphology, microstructure and properties of the powders were analyzed. The results show that the argon atomized powders have high sphericity with less satellite powders and irregular powders, and the yield (mass fraction) of the powders with particle size less than 53 μm is as high as 52.52%. The interior microstructure of the powder is dense, showing both equiaxial grain and dendrite morphology. Ti, Nb, Ta and Mo segregate at the grain boundary. By Sc, Y microalloying, the properties of René104 nickel-based superalloy powders have been improved, with good flow ability and high apparent density. Microhardness, nanohardness (HV) and elastic modulus of the powders are 360±6, (6.5±0.4) GPa and (102.1±10.6 ) GPa, respectively.
Key wordsargon atomization    nickel-based superalloy    microalloying    microstructure    powder property
收稿日期: 2022-04-28      出版日期: 2023-05-04
ZTFLH:  TG146  
基金资助:金属材料磨损控制与成型技术国家地方联合工程研究中心开放基金资助项目(HKDNM201907); 粉末冶金国家重点实验室自主课题
通讯作者: 刘祖铭,教授,博士。电话:0731-88836355;E-mail: lzm@csu.edu.cn   
引用本文:   
曹镔, 刘祖铭, 王建川, 魏冰, 周欢, 张亚洲. 氩气雾化Sc、Y微合金化René104镍基高温合金粉末的组织与性能[J]. 粉末冶金材料科学与工程, 2023, 28(2): 192-202.
CAO Bin, LIU Zuming, WANG Jianchuan, WEI Bing, ZHOU Huan, ZHANG Yazhou. Microstructure and properties of Sc, Y microalloyed René104 nickel-based superalloy powders prepared by argon atomization. Materials Science and Engineering of Powder Metallurgy, 2023, 28(2): 192-202.
链接本文:  
http://pmbjb.csu.edu.cn/CN/10.19976/j.cnki.43-1448/TF.2022054     或     http://pmbjb.csu.edu.cn/CN/Y2023/V28/I2/192
版权所有 © 《粉末冶金材料科学与工程》编辑部
地址:长沙市麓山南路中南大学粉末冶金研究院 邮编:410083 电话:0731-88877163 邮箱:pmbjb@csu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn