挤出式3D打印工艺制备WC-10Co硬质合金的显微结构与力学性能

doi:10.19976/j.cnki.43-1448/TF.2023009

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (1649 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract The traditional method of preparing cemented carbide products with complex components is difficult and costly, which affects the sustainable development of cemented carbide. The cemented carbide samples were formed by extrusion 3D printing. The sintered cemented carbide samples of WC-10Co were prepared by solvent degreasing, hot degreasing and air pressure sintering. The effects of printing parameters, degreasing process and sintering temperature on the microstructure and mechanical properties of the samples were studied. The results show that the surface roughness and dimensional accuracy of the printed samples can be adjusted by using different nozzle sizes. The shape and size of the blank are stable after degreasing by solvent-thermal two-step degreasing method. The microstructure of the alloy is uniformly distributed after sintering. After sintering at 1 450 ℃, the hardness of the alloy is 87.3 HRA, the bending strength is more than 3 500 MPa, and the performance is comparable to that prepared by conventional powder metallurgy method.

Key words： cemented carbide extrusion 3D printing solvent degreasing bending strength hardness

Received: 13 February 2023 Published: 04 May 2023

ZTFLH:

TG136.4

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHU Xianzhi
	CHENG Huichao
	ZHOU Chengshang
	LIU Yong

Cite this article:

ZHU Xianzhi,CHENG Huichao,ZHOU Chengshang, et al. Microstructure and mechanical properties of WC-10Co cemented carbide prepared by extrusion 3D printing[J]. Materials Science and Engineering of Powder Metallurgy, 2023, 28(2): 141-150.

URL:

http://pmbjb.csu.edu.cn/EN/10.19976/j.cnki.43-1448/TF.2023009 OR http://pmbjb.csu.edu.cn/EN/Y2023/V28/I2/141

[1] GARCíA J, CIPRÉS V, BLOMQVIST A, et al. Cemented carbide microstructures: a review[J]. International Journal of Refractory Metals and Hard Materials, 2019, 80: 40-68.
[2] MICHAEL K, WALTER L, IVICA D, et al.Potential of Extrusion Based 3D-printed Hardmetal and Cermet Parts[C]. Beijing, China: World Congress on Powder Metallurgy, 2018.
[3] 张欣悦. 3D冷打印成形硬质合金的研究[D]. 北京: 北京科技大学, 2018.
ZHANG Xinyue.Study on 3D gel printing of cemented carbides[D]. Beijing: University of Science and Technology Beijing, 2018.
[4] YANG Y K, ZHANG C Q, WANG D Y, et al.Additive manufacturing of WC-Co hardmetals: a review[J]. The International Journal of Advanced Manufacturing Technology, 2020, 108(5/6): 1653-1673.
[5] SUWANPREECHA C, MANONUKUL A.A review on material extrusion additive manufacturing of metal and how it compares with metal injection moulding[J]. Metals, 2022, 12(3): 429-484.
[6] RANE K, STRAN M.A comprehensive review of extrusion-based additive manufacturing processes for rapid production of metallic and ceramic parts[J]. Advances in Manufacturing, 2019, 7(2): 155-173.
[7] NURHUUDAN A I, SUPRIADI S, WHULANZA Y, et al.Additive manufacturing of metallic based on extrusion process: a review[J]. Journal of Manufacturing Processes, 2021, 66: 228-237.
[8] ZHANG X Y, GUO Z M, CHEN C G, et al.Additive manufacturing of WC-20Co components by 3D gel-printing[J]. International Journal of Refractory Metals and Hard Materials, 2018, 70: 215-223.
[9] LENGAUER W, DURETEK I, FÜRST M, et al. Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components[J]. International Journal of Refractory Metals and Hard Materials, 2019, 82: 141-149.
[10] KIM H, KIM J I, KIM Y D, et al.Material extrusion-based three-dimensional printing of WC-Co alloy with a paste prepared by powder coating[J]. Additive Manufacturing, 2022, 52: 1-6.
[11] HU Z P, LIU Y, WU J, et al.The simultaneous improvement of strength and ductility of the 93W-4.6Ni- 2.4Fe prepared by additive manufacturing via optimizing sintering post-treatment[J]. Additive Manufacturing, 2021, 46: 1-9.
[12] HU Z P, LIU Y, QIAN Z, et al.The preparation of high-performance 96W-2.7Ni-1.3Fe alloy parts by powder extrusion 3D printing[J]. Materials Science and Engineering A, 2021, 817: 1-8.
[13] 刘晏军, 刘业, 谭彦妮. 间接3D打印制备Ti/HA_p复合材料的结构与性能[J]. 粉末冶金材料科学与工程, 2021, 26(6): 515-524.
LIU Yanjun, LIU Ye, TAN Yanni.Structure and properties of Ti/HA_p composites prepared by indirect 3D printing[J]. Materials Science and Engineering of Powder Metallurgy, 2021, 26(6): 515-524.
[14] SINGH G, MISSIAEN J M, BOUVARD D, et al.Additive manufacturing of 17-4pH steel using metal injection molding feedstock: analysis of 3D extrusion printing, debinding and sintering[J]. Additive Manufacturing, 2021, 47: 1-12.
[15] SINGH G, MISSIAEN J M, BOUVARD D, et al.Copper extrusion 3D printing using metal injection moulding feedstock: Analysis of process parameters for green density and surface roughness optimization[J]. Additive Manufacturing, 2021, 38: 1-15.
[16] 陆腾轩, 孟晓燕, 李狮弟, 等. 硬质合金粉末挤出打印中增材制造工艺及其显微结构[J]. 材料工程, 2022, 50(5): 147-155.
LU Tengxuan, MENG Xiaoyan, LI Shidi, et al.Additive manufacturing process and microstructure during powder extrusion printing of cemented carbides[J]. Journal of Materials Engineering, 2022, 50(5) : 147-155.
[17] 魏崇斌, 宋晓艳, 付军, 等. 烧结方法对WC-Co硬质合金性能的影响[J]. 粉末冶金材料科学与工程, 2012, 17(3): 315-320.
WEI Chongbin, SONG Xiaoyan, FU Jun, et al.Effect of sintering technologies on properties of WC-Co cemented carbides[J]. Materials Science and Engineering of Powder Metallurgy, 2012, 17(3): 315-320.
[18] GONZALEZ-GUTIIERREZ J, CANO S, SCHUSCHNIGG S, et al.Additive manufacturing of metallic and ceramic components by the material extrusion of highly-filled polymers: a review and future perspectives[J]. Materials, 2018, 11(5): 840-875.
[19] MACKAY M E.The importance of rheological behavior in the additive manufacturing technique material extrusion[J]. Journal of Rheology, 2018, 62(6): 1549-1561.
[20] RANE K, BARRIERE T, STRANO M.Role of elongational viscosity of feedstock in extrusion-based additive manufacturing of powder-binder mixtures[J]. The International Journal of Advanced Manufacturing Technology, 2020, 107(11/12): 4389-4402.
[21] 尚峰, 付杰. WC-10Co超细晶硬质合金的注射成形工艺研究[J]. 稀有金属和硬质合金, 2017, 45(4): 63-69.
SHANG Feng, FU Jie.Study on injection molding process of WC-10Co ultrafine grained cemented carbide[J]. Rare Metals and Cemented Carbides, 2017, 45(4) :63-69.
[22] 李志希. 硬质合金注射成形工艺的研究[D]. 长沙: 中南大学, 2005.
LI Zhixi.Research on cemented carbide injection molding process[D]. Changsha: Central South University, 2005.
[23] MONENI V, ASKARI A, ALLAEI M H, et al.Investigating the effect of stearic acid on the mechanical, rheological, and microstructural properties of AISI 4605 feedstock for metal injection molding process[J]. Transactions of the Indian Institute of Metals, 2021, 74(9): 2161-2170.
[24] 李松林, 黄伯云, 曲选辉, 等. 表面活性剂对金属粉末注射成形喂料性能的影响[J]. 稀有金属材料与工程, 2001, 30(2): 131-134.
LI Songlin, HUANG Baiyun, QU Xuanhui, et al.Influence of surfactants on properties of metal injection molding (MIM) feedstock[J]. Rare Metal Materials and Engineering, 2001, 30(2) : 131-134.
[25] CAI H, JING W E, GUO S D, et al.Effects of micro/nano CeO₂ on the microstructure and properties of WC-10Co cemented carbides[J]. International Journal of Refractory Metals and Hard Materials, 2021, 95: 1-11.
[26] 周书助. 硬质合金生产原理和质量控制[M]. 北京: 冶金工业出版社, 2014.
ZHOU Shuzhu.Cemented Carbide Production Principle and Quality Control[M]. Beijing: Metallurgical Industry Press, 2014.