Abstract:Inconel 625 alloy powders for selective laser melting were prepared by vacuum induction furnace melting-high purity argon atomization with atomization pressure of 3.5-5.0 MPa. The particle size distribution and morphology of the powders were characterized by scanning electron microscopy. At the same time, the yield of 45-105 μm granular powder with different atomization pressure was calculated. The results show that the particle size distribution of Inconel 625 alloy powder prepared by vacuum atomization is lognormal distribution, and the curve of particle size distribution has obvious double peaks, which conforms to the secondary breaking mechanism of gas atomization powder. With increasing atomized gas pressure, the particle size becomes finer and the powder yield in the target section increases, but when the atomizing pressure exceeds 4.5 MPa, the particle size changes insignificantly. Furthermore, with the atomization pressure increasing, the more satellite will be produced, and the sphericity of the powder will decrease. And the optimum value of atomization pressure is 4.5 MPa. The average diameter dm of the powder is 72.2 μm, and the yield of 45-105 μm granular powder is 78.1%. The sphericity of the powder is good, which fully meets the requirements of selective laser melting equipment for powder.
李响, 曾克里, 何鹏江, 罗浩, 宗伟, 宋信强, 朱杰. 雾化压力对选区激光熔化用Inconel 625合金粉末粒度与形貌的影响[J]. 粉末冶金材料科学与工程, 2019, 24(4): 374-378.
LI Xiang, ZENG Keli, HE Pengjiang, LUO Hao, ZONG Wei, SONG Xinqiang, ZHU Jie. Effect of atomization pressure on particle size and morphology of Inconel 625 alloy powder for selective laser melting. Materials Science and Engineering of Powder Metallurgy, 2019, 24(4): 374-378.
[1] EVANS N D, MAZIASZ P J, SHINGLEDECKER J P, et al.Microstructure evolution of alloy 625 foil and sheet during creep at 750 ℃[J]. Materials Science and Engineering A, 2008, 498(1/2): 412-420. [2] 杨启云. 选区激光熔化成形用 Inconel 625 合金粉末及制品的性能研究[D]. 北京: 机械科学研究总院, 2016. YANG Qiyun.Research on properties of Inconel 625 alloy powder and products for laser melting forming in selected area[D]. Beijing: General Institute of Mechanical Science Research, 2016. [3] 赵宇辉, 王志国, 龙雨, 等. Inconel 625 镍基高温合金激光增材制造熔池温度影响因素研究[J]. 应用激光, 2015, 35(2): 137-144. ZHAO YUhui, WANG Zhiguo, LONG Yu, et al.Study on the factors influencing the temperature of melting pool in Inconel 625 nickel base superalloy laser additive manufacturing[J]. Applied laser, 2015, 35(2): 137-144. [4] OSAKADA K, SHIOMI M.Flexible manufacturing of metallic products by selective laser melting of powder[J]. Intemational Jounal of Machine Tools & Manufacture, 2006, 46(11): 1188-1193. [5] UNAL A.Production of rapidly solidified aluminum alloy powers by gas atomization and their applications[J]. Powder Metallurgy, 1990, 33(1): 53-59. [6] 李清泉. 紧耦合气体雾化制粉原理[J]. 粉末冶会工业, 1999, 9(5): 3-6. LI Qingquan.Principles of powder preparation by tightly coupled gas atomization[J]. Powder Metallurgy Industry, 1999, 9(5): 3-6. [7] ÜNAL A.Gas atomization of fine Zinc powders[J]. International Journal of Powder Metallurgy, 1990, 26(1): 11-15. [8] RAYLEIGH L. On the instability of jets[J]. Proceedings of the London Mathematical Society, 1878, 1(1): 4-13. [9] 许天旱, 王党会. 雾化器导液管内径对无铅焊锡粉末形貌及粒度分布的影响[J]. 粉末冶金技术, 2009, 27(3): 197-202. XU Tianhan, WANG Danghui.Effect of inner diameter of liquid guide pipe of atomizer on morphology and particle size distribution of lead-free solder powder[J]. Powder Metallurgy Technology, 2009, 27(3): 197-202. [10] 张维涛. 双级耦合雾化法制备合金粉末的研究[D]. 兰州: 兰州理工大学, 2013. ZHANG Weitao.Research on preparation of alloy powder by two-stage coupling atomization[D]. Lanzhou: Lanzhou University of Technology, 2013. [11] 黄培云. 粉末冶金原理[M]. 北京: 冶金工业出版社, 1997: 98-101. HUANG Peiyun.Theory of Power Metallurgy[M]. Beijing: Metallurgical Industry Press, 1997: 98-101. [12] YUAN W H, CHE Z H, HUANG P Y.Preparation of heat resistant aluminum alloy pipe blanks by multilayer spray deposition[J]. Trans Nonferrous Met Soc China, 2000, 10(4): 461-465. [13] UNAL A.Effect of processing variables on particle size in gas atomization of rapidly solidified aluminum powders[J]. Materials Science and Technology, 1987, 12(3): 1029-1035. [14] UNAL A.Influence of nozzle geomertry in gas atomization of rapidly solidified aluminum alloys[J]. Materials Science and Technology, 1988, 4(10): 909-913. [15] 沈英俊, 季道馨, 徐永利, 等. 若干雾化参数的理论简析[J].粉末冶金技术, 1995, 13(1): 21-25. SHEN Yingjun, JI Daoxin, XU Yongli, et al.Theoretical analysis of some atomization parameters[J]. Powder Metallurgy Technology, 1995, 13(1): 21-25. [16] 郭景杰, 傅恒志. 合金熔体及其处理[M]. 北京: 机械工业出版社, 2005: 8-20. GUO Jingjie, FU Hengzhi.Alloy Melt and its Treatment[M]. Beijing: Machinery Industry Press, 2005: 8-20.