Abstract：50Cu@50Fe composite powder was prepared by electroless copper plating, and then the coated composite powder was compression molded and sintered in a hydrogen atmosphere at 850-1 050 ℃ to prepare 50Cu-50Fe alloy, and then the alloy was subjected to cold rolling deformation, solid solution and aging heat treatment. The effects of sintering temperature, aging temperature and aging time on the structures, tensile strength and electrical conductivity of 50Cu-50Fe alloy were studied. The results show that after sintering at 1 050 ℃ for 1 h, the relative density of the 50Cu-50Fe alloy reaches 95.5% and the tensile strength is 392 MPa. The sintered 50Cu-50Fe alloy after deformation and solid solving, the relative density increases to 99.4%, the tensile strength is 422 MPa, and the electrical conductivity is 18.11 IACS%. After aging at 450 ℃ for 4 h, a large number of dispersed spherical Fe-rich phase particles precipitate in the Cu matrix, the tensile strength reaches 492 MPa, and the electrical conductivity is 39.11 IACS%. When the ageing temperature is higher than 450 ℃, the Fe-rich phase particles aggregate and grow at the grain boundaries of the Cu matrix, resulting in a decrease in the mechanical properties of the 50Cu-50Fe alloy. After aging at 550 ℃ for 4 h, the tensile strength of the 50Cu-50Fe alloy is 422 MPa, and the electrical conductivity is 45.22 IACS%.
毛敏聪, 甘雪萍, 周科朝, 赵琪, 诸璠. 烧结温度与时效工艺对Cu@Fe复合粉末制备Cu-Fe合金组织与性能的影响[J]. 粉末冶金材料科学与工程, 2021, 26(4): 363-371.
MAO Mincong, GAN Xueping, ZHOU Kechao, ZHAO Qi, ZHU Fan. Effects of sintering temperature and aging process on microstructure and properties of Cu-Fe alloy prepared by Cu@Fe composite powder. Materials Science and Engineering of Powder Metallurgy, 2021, 26(4): 363-371.
[1] LIU S C, JIE J C, GUO Z K, et al.A comprehensive investigation on microstructure and magnetic properties of immiscible Cu-Fe alloys with variation of Fe content[J]. Materials Chemistry and Physics, 2019, 238: 121909. [2] 陈乐平, 周全. 高强高导电 Cu-Fe 合金的研究现状及展望[J]. 铸造技术, 2009, 30(9): 1177-1179. CHEN Leping, ZHOU Quan.Prospect and current status of research on Cu-Fe alloys with high stength and conductivity[J]. Foundry Technology, 2009, 30(9): 1177-1179. [3] TURCHANIN M A, AGRAVAL P G, NIKOLAENKO I V.Thermodynamics of alloys and phase equilibria in the copper-iron system[J]. Journal of Phase Equilibria, 2003, 24(4): 307-319. [4] 张盼, 刘平, 刘新宽, 等. 不同成分Cu-Fe合金组织与性能变化研究[J]. 铸造技术, 2018, 38(3): 506-511. ZHANG Pan, LIU Ping, LIU Xinkuan, et al.Study on the microstructure and properties of copper-ferro alloys with different components[J]. Foundry Technology, 2018, 38(3): 506-511. [5] YAMAUCHI I, IRIE T, SAKAGUCHI H.Metastable liquid separation in undercooled Fe-Cu and Fe-Cu-Si melts containing a small B concentration and their solidification structure[J]. Journal of Alloys and Compounds, 2005, 403(1): 211-216. [6] BABILAS R, BAJOREK A, SPILKA M, et al.Structure and corrosion resistance of Al-Cu-Fe alloys[J]. Progress in Natural Science (Materials International), 2020, 30(3): 393-401. [7] WANG M, ZAHNG R, XIAO Z, et al, Microstructure and properties of Cu-10%Fe alloy produced by double melt mixed casting and multi-stage thermomechanical treatment[J]. Journal of Alloys and Compounds, 2020, 820: 153323. [8] WANG M, JIANG Y B, LI Z.Microstructure evolution and deformation behavior of Cu-10%Fe alloy during cold rolling[J]. Materials Science and Engineering A, 2021, 801: 14037. [9] ABBAS S F, PARK K T, KIM T S.Effect of composition and powder size on magnetic properties of rapidly solidified copper-iron alloys[J]. Journal of Alloys and Compounds, 2018, 741: 1188-1195. [10] HE J, ZHAO J Z.Behavior of Fe-rich phase during rapid solidification of Cu-Fe hypo peritectic alloy[J]. Materials Science and Engineering A, 2005, 404: 85-90. [11] 何杰, 赵九洲. 快速凝固Cu-Fe 难混溶合金的显微组织[J]. 金属学报, 2005, 41(4): 407-410. HE Jie, ZHAO Jiuzhou.Microstructures of rapidly solidified Cu-Fe immiscible[J]. Acta Metallurgica Sinica, 2005, 41(4): 407-410. [12] H J, ZHAO J Z, RATKE L. Solidification microstructure and dynamics of metastable phase transformation in undercooled liquid Cu-Fe alloys[J]. Acta Materialia, 2006, 54(6): 1749-1756. [13] CHEN Y Z, LIU F, YANG G C, et al.Rapid solidification of bulk undercooled hypoperitectic Fe-Cu alloy[J]. Journal of Alloys and Compounds, 2007, 427(1): L1-L5. [14] ABBAS F A, SEO S J, PARK K T, et al.Effect of grain size on the electrical conductivity of copper-iron alloys[J]. Journal of Alloys and Compounds, 2017, 720: 8-16. [15] SARDAR FARHAT A, TAEK-SOO K.Effect of lattice strain on the electrical conductivity of rapidly solidified copper-iron metastable alloys[J]. Journal of Alloys and Compounds, 2018, 732: 129-135. [16] Metal Powder Industries Federation, American Powder Metallurgy Institute, APMI International. Advances in Powder Metallurgy and Particulate Materials[M]. NJ, USA: Metal Powder Industries Federation, 2006: 35-40. [17] 黄培云. 粉末冶金原理[M]. 北京: 冶金工业出版社, 1997: 334-340. HUANG Peiyun.Principles of Powder Metallurgy[M]. Beijing: Metallurgical Industry Press, 1997: 334-340. [18] LYDID A, ASEP S, RUDI R. microstructure and mechanical properties of copper-iron fabricated by mechanical milling and continuous sintering[J]. Solid State Phenomena, 2019, 295: 37-42. [19] SAUVAGE X, WETSCHER F, PAREGE P.Mechanical alloying of Cu and Fe induced by severe plastic deformation of a Cu-Fe composite[J]. Acta Material, 2005, 53(7): 2127-2135. [20] 张珊珊, 历长云, 潘跃武, 等. 铜包铁粉的制备及应用[J]. 粉末冶金技术, 2020, 38(6): 465-474. ZHANG Shanshan, LI Changyun, PAN Yuewu, et al.Application and preparation of copper-coated iron powders[J]. Powder Metallurgy Technology, 2020, 38(6): 465-474. [21] 熊海平, 萧以德, 伍建华, 等. 化学镀铜的进展[J]. 表面技术, 2002, 31(6): 9-11. XIONG Haiping, XIAO Yide, WU Jianhua, et al.Development of electroless copper plating[J]. Surface Technology, 2002, 31(6): 9-11.
2021, Vol. 26 
