Nb元素对Zr-Ti基生物材料力学性能和耐腐蚀性能的影响

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (459 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要通过真空非自耗电弧熔炼炉制备Zr-Ti-xNb(x=6、8、10,摩尔分数,%,下同)合金,采用锻造和β单相区固溶热处理工艺进一步加工铸锭,通过对材料微观组织、力学性能和耐腐蚀性能的表征,研究Nb元素对Zr-Ti基生物材料力学性能和耐腐蚀性能的影响。结果显示,Zr-Ti-xNb(x=6、8、10)合金均由β相和α″相组成,随着Nb元素含量增加,β相含量增加,α″相含量降低,Nb元素添加提高了合金中β相的稳定性。同时Nb含量增加,合金屈服强度由360 MPa增加至780 MPa,固溶强化效应明显,在变形过程中出现了应力诱发马氏体相变现象,极大提高材料的抗拉强度和塑性。同时可以较好地提高合金的耐腐蚀性能,实验表明三种材料在生理盐水中均表现出较强的耐腐蚀性能。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	王东
	刘立斌
	薛人豪
	徐小宁
	章立钢

关键词 ： Zr-Ti合金, β相稳定性;, 微观组织, 力学性能, 耐腐蚀性能

Abstract：In this paper, Zr-Ti-xNb(x=6, 8, 10, mole fraction, %) alloy is prepared via vacuum non-consumable arc melting furnace. Then the ingot is further processed by forging technology and heat treatment in β single-phase zone. The effect of Nb element on the mechanical properties and corrosion resistance of Zr-Ti based alloys was studied through the measurement of microstructure, mechanical properties and corrosion resistance. Zr-Ti-xNb(x=6, 8, 10) alloys are composed of β phase and α" phase. When the content of Nb element increases, the content of β phase increases, but α" phase content decreases, which indicates Nb improves the stability of β phase. With the increase of Nb content, the yield strength raised from 360 MPa to 780 MPa. The solid solution strengthening effect is obvious. At the same time, stress induced martensitic transformation during the deformation process can greatly improve the tensile strength and plasticity. The increase of Nb content also enhances the corrosion resistance, and the experiments show that those alloys all exhibit strong corrosion resistance in physiological saline.

Key words： Zr-Ti alloy β-phase stability; microstructure mechanical properties corrosion resistance

收稿日期: 2020-12-22 出版日期: 2021-05-07

ZTFLH:

TG164.2

基金资助:科技部重大专项(2016YFB0701301)

引用本文:

王东, 刘立斌, 薛人豪, 徐小宁, 章立钢. Nb元素对Zr-Ti基生物材料力学性能和耐腐蚀性能的影响[J]. 粉末冶金材料科学与工程, 2021, 26(2): 125-131.
WANG Dong, LIU Libin, XUE Renhao, XU Xiaoning, ZHANG Ligang. Effect of Nb on mechanical properties and corrosion resistance of Zr-Ti based biomaterials. Materials Science and Engineering of Powder Metallurgy, 2021, 26(2): 125-131.

链接本文:

http://pmbjb.csu.edu.cn/CN/ 或 http://pmbjb.csu.edu.cn/CN/Y2021/V26/I2/125

[1] BANERJEE D, WILLIAMS J.C. Perspectives on titanium science and technology[J]. Acta Materialia, 2013, 61: 844-879.
[2] NAGELS J, STOKDIJK M, ROZING P M.Stress shielding and bone resorption in shoulder arthroplasty[J]. Journal of Shoulder and Elbow Surgery, 2003, 12(1): 35-39.
[3] ZHOU F Y, WANG B L, QIU K J, et al.Microstructure, corrosion behavior and cytotoxicity of Zr-Nb alloys for biomedical application[J]. Materials Science and Engineering: C, 2012, 32: 851-857.
[4] MITSUO N.Recent metallic materials for biomedical applications[J]. Metallurgical and Materials Transactions A, 2002, 33: 477-486.
[5] ATTAR H, CALIN M, ZHANG L C, et al.Manufacture by selective laser melting and mechanical behavior of commercially pure titanium[J]. Materials Science and Engineering: A, 2014, 593:170-177.
[6] LONG M, RACK H J.Titanium alloys in total joint replacement-a materials science perspective[J]. Biomaterials, 1998, 19(18):1621-1639.
[7] NIINOMI M.Mechanical biocompatibilities of titanium alloys for biomedical applications[J]. Journal of Mechanical Behavior Biomedical Materials, 2008, 1: 30-42.
[8] KONDO R, NOMURA N, SUYALATU, et al. Microstructure and mechanical properties of as-cast Zr-Nb alloys[J]. Acta Biomaterialia, 2011, 7: 4278-4284.
[9] ZHAO X L, LI L, NIINOMI M, et al.Metastable Zr-Nb alloys for spinal fixation rods with tunable Young’s modulus and low magnetic resonance susceptibility[J]. Acta Biomaterialia, 2017, 62: 372-384.
[10] EQUO K, SHIGERU M, HISASHI D, et al.Mechanical properties of the binary titanium-zirconium alloys and their potential for biomedical materials[J]. Journal of Biomedical Materials Research, 1995, 29: 943-950.
[11] HSU H C, WU S C, HSU S K, et al.Effects of heat treatments on the structure and mechanical properties of Zr-30Ti alloys[J]. Materials Characterization, 2011, 62: 157-163.
[12] HSU H C, WU S C, SUNG Y C, et al.The structure and mechanical properties of as-cast Zr-Ti alloys[J]. Journal of Alloys and Compounds, 2009, 488: 279-283.
[13] QU W T, SUN X G, YUAN B F, et al.Microstructures and phase transformations of Ti-30Zr-xNb(x=5, 7, 9, 13at.%) shape memory alloys[J]. Materials Characterization, 2016, 122: 1-5.
[14] OZAN S, LIN J, LI Y, et al.Development of Ti-Nb-Zr alloys with high elastic admissible strain for temporary orthopedic devices[J]. Acta Biomaterialia, 2015, 20: 176-187.
[15] OZAN S, LIN J, WENG W, et al.Effect of thermomechanical treatment on the mechanical and microstructural evolution of a beta-type Ti-40.7Zr-24.8Nb alloy[J]. Bioactive Materials, 2019, 4: 303-311.
[16] LI S L, NAM T H.Superelasticity and tensile strength of Ti-Zr-Nb-Sn alloys with high Zr content for biomedical applications[J]. Intermetallics, 2019, 112: 106545.
[17] WANG X, ZHANG L, GUO Z, et al.Study of low-modulus biomedical beta Ti-Nb-Zr alloys based on single-crystal elastic constants modeling[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2016, 62: 310-318.
[18] NIINOMI Mitsuo.Recent research and development in titanium alloys for biomedical applications and healthcare goods[J]. Science and Technology of Advanced Materials, 2016, 4: 445-454.
[19] LEE C M, JU C P, CHERN L.Structure-property relation of cast Ti-Nb alloys[J]. Jouranl of Oral Rehabilitation, 2002, 29: 314-322.
[20] LI Q, MA G H, LI J J, et al.Development of low-Young’s modulus Ti-Nb-based alloys with Cr addition[J]. Journal of Materials Science, 2019, 54: 8675-8683.
[21] BOLAT G, IZQUIERDO J, SANTANA J J, et al.Electrochemical characterization of ZrTi alloys for biomedical applications[J]. Electrochimica Acta, 2013, 88: 447-456.
[22] YU Z T, ZHANG M H, TIAN Y X, et al.Designation and development of biomedical Ti alloys with finer biomechanical compatibility in long-term surgical implants[J]. Frontiers of Materials Science, 2014, 8: 219-229.
[23] 林建国, 罗联. Nb含量及相组成对Ti-Nb二元合金腐蚀性能的影响[J]. 湘潭大学自然科学学报, 2009, 31(1): 34-37.
LIN Jianguo, LUO Lian.Influence of Nb content and microstructure on the electrochemical behavior of Ti-Nb alloys[J]. Natural Science Journal of Xiangtan University, 2009, 31(1): 34-37.