Microstructure and mechanical properties of siliceous rock/A356 composites for construction prepared by spray forming
LI Kui1, ZHANG Zhaofang1, MA Nan2, LI Ming3
1. Henan Vocational College of Architecture, Department of Civil Engineering, Zhengzhou 450064, China; 2. School of Information and Business, Zhongyuan University of Technology, Xinzheng 450007, China; 3. Henan Institute of Building Science Co., Ltd., Zhengzhou 450064, China
Abstract：The A356 aluminum alloys and siliceous rock particles reinforced A356 aluminum matrix composites (mass fraction of siliceous rock particles is 4.5%) were prepared by spray molding. The interface structure, aluminum matrix structure and mechanical properties were compared. The results showed that all of the siliceous rock particles could be captured and uniformly distributed in the aluminum matrix during the spray forming. The siliceous rock particles formed a good mosaic structure in the aluminum matrix, and did not fall off during the double-spray electrolysis. Many dislocations were formed in the area close to the particle/matrix interface. The Si content in the Al matrix near the interface was higher, while the amount of other elements remained unaltered. Compared with A356 aluminum alloy, the tensile strength of siliceous rock/A356 composites increased from 603 MPa to 662 MPa, and the elongation increased from 3.52% to 3.92%. Both of the A356 alloy and siliceous rock/A356 composite were ductile fracture. The tensile fracture surface of siliceous rock/A356 composites was pitted by the pulled-out grains of siliceous rock, and many debris were generated.
李奎, 张照方, 马楠, 李明. 喷射成形制备建筑用硅质岩/A356复合材料的组织与力学性能[J]. 粉末冶金材料科学与工程, 2020, 25(4): 358-362.
LI Kui, ZHANG Zhaofang, MA Nan, LI Ming. Microstructure and mechanical properties of siliceous rock/A356 composites for construction prepared by spray forming. Materials Science and Engineering of Powder Metallurgy, 2020, 25(4): 358-362.
[1] DHAND V, MITTAL G, RHEE K Y.A short review on basalt fiber reinforced polymer composites[J]. Composites Part B, 2015, 73(7): 166-180. [2] 霍光, 王学兵, 况春江, 等. 喷射成形过共晶AlSi合金锭坯的渐变组织研究[J]. 粉末冶金工业, 2011, 21(6): 26-29. HUO Guang, WANG Xuebin, KUANG Chunjiang, et al.The grain structure research of spray forming AiSi alloy[J]. Powder Metallurgy Industry, 2011, 21(6): 26-29. [3] 吴增荣, 胡永俊, 代明江, 等. 气体温度对冷喷涂7075铝合金涂层性能的影响[J]. 表面技术, 2020, 49(1): 318-325. WU Zengrong, HU Yongjun, DAI Mingjiang, et al.Effect of gas temperature on properties of cold sprayed 7075 aluminum alloy coatings[J]. Surface Technology, 2020, 49(1): 318-325. [4] 周恺, 谢发勤, 吴向清, 等. 铝、镁、钛基材料微弧氧化涂层摩擦学性能研究进展[J]. 稀有金属材料与工程, 2019, 48(11): 3753-3763. ZHOU Kai, XIE Faqin, WU Xiangqing, et al.Research progress on tribological properties of micro arc oxidation coatings on aluminum, magnesium and titanium based materials[J]. Rare Metal Materials and Engineering, 2019, 48(11): 3753-3763. [5] 刘丘林, 王艳群. 喷射成形6061铝合金的显微组织与力学性能研究[J]. 粉末冶金工业, 2015, 25(3): 17-22. LIU Qiulin, WANG Yanqun.Study on microstructure and mechanical properties of spray formed 6061 aluminum alloy[J]. Powder Metallurgy Industry, 2015, 25(3): 17-22. [6] DONG J F, WANG Q Y, GUAN Z W.Material properties of basalt fibre reinforced concrete made with recycled earthquake waste[J]. Construction and Building Materials, 2017, 130(6): 241-251. [7] 谢雨凌, 汪明亮, 马乃恒, 等. 玄武岩纤维增强铝基材料的界面反应及力学性能分析[J]. 铸造技术, 2013(7): 803-806. XIE Yuling, WANG Mingliang, MA Naiheng, et al.Interface reaction and property of basalt fiber reinforced Al-based composites[J]. Founder Technology, 2013(7): 803-806. [8] WANG Z W, YUAN Y B, ZHENG R X, et al.Microstructures and mechanical properties of extruded 2024 aluminum alloy reinforced by FeNiCrCoAl3 particles[J]. Transactions of Nonferrous Metals Society of China, 2014, 24(4): 2366-2373. [9] 高文理, 苏海, 张辉, 等. 喷射共沉积SiCp/2024材料的显微组织与力学性能[J]. 中国有色金属学报, 2010, 20(1): 49-54. GAO Wenli, SU Hai, ZHANG Hui, et al.Microstructure and mechanical properties of spray co-deposited SiCp/2024 aluminum matrix composite[J]. The Chinese Journal of Nonferrous Metals, 2010, 20(1): 49-54. [10] LI M, MA K, JIANG L, LAVERNIA E J.Synthesis and mechanical behavior of nanostructured Al 5083/n-TiB2 metal matrix composites[J]. Materials Science and Engineering A, 2016, 656(3): 241-248. [11] 丁浩, 崔喜平, 许长寿, 等. 连续玄武岩纤维增强铝基层状复合材料的制备与力学特性[J]. 金属学报, 2018, 54(8): 1171-1178. DING Hao, CUI Xiping, XU Changshou, et al.Fabrication and mechanical characteristics of multilaminated aluminum matrix composites reinforced by continuous basalt fibers[J]. Acta Metallurgica Sinica, 2018, 54(8): 1171-1178. [12] 栾建泽, 那景新, 谭伟, 等. 服役低温老化对铝合金-玄武岩纤维增强树脂复合材料粘接接头力学性能的影响及失效预测[J]. 复合材料学报, 2020, 12(56): 1-9. LUAN Jianze, NA Jingxin, TAN Wei, et al.Effect of service low-temperature aging on mechanical properties of aluminum alloy-basalt fiber reinforced polymer composite bonding joints and failure prediction[J]. Acta Materiae Compositae Sinica, 2020, 12(56): 1-9.
2020, Vol. 25 
