2025年08月07日 星期四 首页   |   期刊介绍   |   编 委 会   |   投稿指南   |   出版法规   |   出版伦理   |   期刊订阅   |   联系我们   |   留言板   |   广告合作   |   ENGLISH
粉末冶金材料科学与工程  2020, Vol. 25 Issue (2): 179-184    
  工艺技术 本期目录 | 过刊浏览 | 高级检索 |
碳纳米管对泡沫铜/石蜡复合相变材料热性能的影响
包胜友1, 安俊杰1, 马莉2, 魏秋平1, 柏振海1, 周科朝2
1.中南大学 材料科学与工程学院,长沙 410083;
2.中南大学 粉末冶金国家重点实验室,长沙 410083
Effect of carbon nanotube on thermal properties of copper foam/paraffin composite phase change materials
BAO Shengyou1, AN Junjie1, MA Li2, WEI Qiuping1, BO Zhenhai1, ZHOU Kechao2
1. School of Materials Science and Engineering, Central South University, Changsha 410083, China;
2. State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China
全文: PDF (57995 KB)   HTML (0 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 以泡沫铜(copper foam, CF)、碳纳米管(carbon nanotubes, CNT)和石蜡为原料,分别制备CF/混合CNT/石蜡和CF/催化CNT/石蜡两种复合相变材料(phase change material, PCM),CNT与石蜡的质量比均为1:99。采用SEM和Raman光谱表征材料的形貌和品质,用激光导热测试仪和差示扫描量热仪表征复合PCM的传热性能和相变行为。结果表明,所有PCM复合情况良好,且引入2种不同形式的CNT均能提高石蜡的热导率。虽然混合CNT的品质比催化CNT更好,但与CF/混合CNT/石蜡复合材料的热导率(3.28 W/(m∙K))相比,CF/催化CNT /石蜡复合材料的热导率仍达到3.94 W/(m∙K)。此外,两种形式的CNT均能有效改善石蜡的相变潜热和过冷度。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
包胜友
安俊杰
马莉
魏秋平
柏振海
周科朝
关键词 泡沫铜碳纳米管石蜡复合相变材料热导率过冷度    
Abstract:Copper foam (CF), carbon nanotubes (CNT) and paraffin were used to prepare CF/mixed CNT/paraffin and CF/catalyzed CNT/paraffin composite phase change materials (PCM). The mass ratio of CNT and paraffin was 1:99. SEM and Raman spectra were used to characterize the morphology and quality of the samples. The thermal conductivity and phase change behavior of phase change materials were measured by laser thermal conductivity tester and differential scanning calorimeter. The results show that the composite PCM is well compounded, and the thermal conductivity of paraffin can be improved by introducing two kinds of CNT. Even though the quality of mixed CNT is better than that of catalytic CNT, compared with the thermal conductivity of CF/mixed CNT/paraffin composite (3.28 W/(m∙K)), the thermal conductivity of CF/catalytic CNT/paraffin sample increases to 3.94 W/(m∙K). In addition, two kinds of CNT can effectively improve the influence of supercooling degree and shape stability of the paraffin.
Key wordscopper foam    carbon nanotube    paraffin    composite phase change material    thermal conductivity    supercooling degree
收稿日期: 2019-12-29      出版日期: 2020-06-19
ZTFLH:  TB333  
  O613.71  
基金资助:国家重点研究开发计划(2016YFB0301400); 国家自然科学基金(51601226,51874370); 湖南省自然科学基金(2019JJ40375,2019JJ50793)
通讯作者: 马莉,副教授,博士。电话:13787086046;E-mail: marycsupm@csu.edu.cn   
引用本文:   
包胜友, 安俊杰, 马莉, 魏秋平, 柏振海, 周科朝. 碳纳米管对泡沫铜/石蜡复合相变材料热性能的影响[J]. 粉末冶金材料科学与工程, 2020, 25(2): 179-184.
BAO Shengyou, AN Junjie, MA Li, WEI Qiuping, BO Zhenhai, ZHOU Kechao. Effect of carbon nanotube on thermal properties of copper foam/paraffin composite phase change materials. Materials Science and Engineering of Powder Metallurgy, 2020, 25(2): 179-184.
链接本文:  
http://pmbjb.csu.edu.cn/CN/     或     http://pmbjb.csu.edu.cn/CN/Y2020/V25/I2/179
版权所有 © 《粉末冶金材料科学与工程》编辑部
地址:长沙市麓山南路中南大学粉末冶金研究院 邮编:410083 电话:0731-88877163 邮箱:pmbjb@csu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn