光固化打印电池技术的应用及展望

doi:10.19976/j.cnki.43-1448/TF.2024117

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (422 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract As a new additive manufacturing technology, photocuring printing technology provides a new way for battery manufacturing. This paper introduces the current research status of photocuring technology in the battery field, describes the application of photocuring technology in battery materials such as conductive polymers, carbon-based materials, metal oxides, solid electrolyte materials, and separator materials, puts forward suggestions and prospects for the development of photocuring printing batteries, in order to provide reference for scientific researchers and technical personnel in related fields.

Key words： photocuring printing positive and negative pole interface control performance testing battery material

Received: 27 December 2024 Published: 15 April 2025

ZTFLH:

TB332

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHAN Lina
	WANG Aiyue
	ZHONG Jiani
	YU Fengying
	LIU Yao

Cite this article:

ZHAN Lina,WANG Aiyue,ZHONG Jiani, et al. Application and prospect of photocuring printing battery technology[J]. Materials Science and Engineering of Powder Metallurgy, 2025, 30(2): 101-106.

URL:

http://pmbjb.csu.edu.cn/EN/10.19976/j.cnki.43-1448/TF.2024117 OR http://pmbjb.csu.edu.cn/EN/Y2025/V30/I2/101

[1] COSTA C M, GONÇALVES R, LANCEROS-MÉNDEZ S, et al. Recent advances and future challenges in printed batteries[J]. Energy Storage Materials, 2020, 28: 216-234.
[2] MARTINEZ A C, SCHIAFFINO E M, ARANZOLA A P, et al.Multiprocess 3D printing of sodium-ion batteries via vat photopolymerization and direct ink writing[J]. Journal of Physics: Energy, 2023, 5(4): 045010.
[3] AL’AREF S J, MOSADEGH B, DUNHAM S, et al. 3D Printing Applications in Cardiovascular Medicine[M]. Amsterdam: Elsevier, 2018.
[4] HE Y J, CHEN S J, NIE L, et al.Stereolithography three-dimensional printing solid polymer electrolytes for all-solid-state lithium metal batteries[J]. Nano Letters, 2020, 20(10): 7136-7143.
[5] LI C, DU J J, GAO Y, et al.Stereolithography of 3D sustainable metal electrodes towards high‐performance nickel iron battery[J]. Advanced Functional Materials, 2022, 32(40): 2205317.
[6] CHEN Q M.Printing 3D lithium‐ion microbattery using stereolithography[D]. West Lafayette: Purdue University, 2016.
[7] NORJELI M F, TAMCHEK N, OSMAN Z, et al.Additive manufacturing polyurethane acrylate via stereolithography for 3D structure polymer electrolyte application[J]. Gels, 2022, 8(9): 589.
[8] COHEN E, MENKIN S, LIFSHITS M, et al.Novel rechargeable 3D-microbatteries on 3D-printed-polymer substrates: feasibility study[J]. Electrochimica Acta, 2018, 265: 690-701.
[9] ANDISETIAWAN A, ALKINDI T, ATATREH S, et al.Stereolithography 3D printing for vanadium redox flow battery: electrolyte compatibility and watertightness of 3D-printed parts[J]. Next Materials, 2025, 6: 100317.
[10] ZEKOLL S, MARRINER-EDWARDS C, OLA HEKSELMAN A K, et al. Hybrid electrolytes with 3D bicontinuous ordered ceramic and polymer microchannels for all-solid-state batteries[J]. Energy & Environmental Science, 2018, 11(1): 185-201.
[11] KONG D Z, WANG Y, HUANG S Z, et al.3D printed compressible quasi-solid-state nickel-iron battery[J]. Acs Nano, 2020, 14(8): 9675-9686.
[12] ZAERA F.The surface chemistry of thin film atomic layer deposition (ALD) processes for electronic device manufacturing[J]. Journal of Materials Chemistry, 2008, 18(30): 3521-3526.
[13] PARSONS G N, GEORGE S M, KNEZ M.Progress and future directions for atomic layer deposition and ALD-based chemistry[J]. MRS Bulletin, 2011, 36(11): 865-871.
[14] NAZRI M A, NORDIN A N, LIM L M, et al.Fabrication and characterization of printed zinc batteries[J]. Bulletin of Electrical Engineering and Informatics, 2021, 10(3): 1173-1182.
[15] SAIDI A, DESFONTAINES L, CHAMPEVAL A, et al.The effect of ink formulation and electrode geometry design on the electrochemical performance of a printed alkaline battery[J]. Flexible and Printed Electronics, 2017, 2(1): 015002.
[16] VAN DER HEIJDEN M, KROESE M, BORNEMAN Z, et al. Investigating mass transfer relationships in stereolithography 3D printed electrodes for redox flow batteries[J]. Advanced Materials Technologies, 2023, 8(18): 2300611.
[17] CHEN Q M, XU R, HE Z T, et al.Printing 3D gel polymer electrolyte in lithium-ion microbattery using stereolithography[J]. Journal of the Electrochemical Society, 2017, 164(9): 9-18.
[18] IBANEZ J G, RINCÓN M E, GUTIERREZ-GRANADOS S, et al. Conducting polymers in the fields of energy, environmental remediation, and chemical-chiral sensors[J]. Chemical Reviews, 2018, 118(9): 4731-4816.
[19] HREHOROVA E, WOOD L K, PEKAROVIC J, et al.The properties of conducting polymers and substrates for printed electronics[J]. NIP & Digital Fabrication Conference, 2005, 21: 197-202.
[20] KAYSER L V, LIPOMI D J.Stretchable conductive polymers and composites based on PEDOT and PEDOT: PSS[J]. Advanced Materials, 2019, 31(10): 1806133.
[21] NISHII M, IWABUCHI Y, KOTSUBO H, et al.54.2: Direct printed electrodes of transparent conductive polymers for flexible electronic papers[J]. SID Symposium Digest of Technical Papers, 2010, 41(1): 814-817.
[22] DOERING O M, VETTER C, ALHAWWASH A, et al.Durable scalable 3D SLA‐printed cuff electrodes with high performance carbon + PEDOT: PSS-based contacts[J]. Artificial Organs, 2022, 46(10): 2085-2096.
[23] WANG X, ZHI L J, MÜLLEN K. Transparent, conductive graphene electrodes for dye-sensitized solar cells[J]. Nano Letters, 2008, 8(1): 323-327.
[24] HECHT D S, HU L B, IRVIN G.Emerging transparent electrodes based on thin films of carbon nanotubes, graphene, and metallic nanostructures[J]. Advanced Materials, 2011, 23(13): 1482-1513.
[25] REDONDO E, NG S, MUÑOZ J, et al. Tailoring capacitance of 3D-printed graphene electrodes by carbonisation temperature[J]. Nanoscale, 2020, 12(38): 19673-19680.
[26] LEVY A, TOKER G B, CHAN D J L, et al. Hybrid structural electronics fabrication by combined SLA and metal printing[J]. Smart Materials and Structures, 2023, 32(6): 065003.
[27] MA M M, ZHANG M H, JIANG B T, et al.A review of all-solid-state electrolytes for lithium batteries: high-voltage cathode materials, solid-state electrolytes and electrode-electrolyte interfaces[J]. Materials Chemistry Frontiers, 2023, 7(7): 1268-1297.
[28] SABATO A G, MUÑEZ EROLES M, ANELLI S, et al. 3D printing of self-supported solid electrolytes made of glass-derived Li_1.5Al_0.5Ge_1.5P₃O₁₂ for all-solid-state lithium-metal batteries[J]. Journal of Materials Chemistry A, 2023, 11(25): 13677-13686.
[29] KIM C, AHN B Y, WEI T S, et al.High-power aqueous zinc-ion batteries for customized electronic devices[J]. ACS Nano, 2018, 12(12): 11838-11846.