粉磨方式对钢渣微粉特性的影响

Abstract
Figure/Table
References
Related Citation (4)

Download: PDF (408 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Making the steel slag into powder by the mechanical comminuting process and applying it to the building materials production is an effective way of the steel slag recycling. The steel slag was ground mechanically by a ball mill and a supersonic steam-jet crusher, respectively. The particle size distribution, chemical composition, mineral composition and the activity index of the steel slag powder obtained by the two kinds of grinding methods were compared and analyzed. In addition, the grinding efficiency and energy consumption of the above two grinding methods were also analyzed. The results show that, in comparison steel slag obtained by ball mill, the particle size (D₅₀: 2.06 μm) of the steel slag obtained by the supersonic steam mill is smaller, and the particle size distribution range is narrower, and the particle is more uniform. Obvious chemical component segregation occurs in the steel slag obtained by the supersonic steam-jet crusher, and more Ca and Si elements are enriched in the steel slag with smaller size particles, which is more conducive to the appearance of its gelling activity. Compared with the ball mill, the supersonic steam mill has higher grinding efficiency and lower energy consumption, and it is more suitable for the steel slag grinding.

Key words： steel slag power ball mill supersonic steam-jet crusher grinding efficiency

Received: 18 September 2019 Published: 19 June 2020

ZTFLH:

X705

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	DUAN Siyu
	LI Xi
	MA Zhuohui
	LIAO Hongqiang
	CHENG Fangqin

Cite this article:

DUAN Siyu,LI Xi,MA Zhuohui, et al. Effect of grinding method on properties of steel slag powder[J]. Materials Science and Engineering of Powder Metallurgy, 2020, 25(1): 51-57.

URL:

http://pmbjb.csu.edu.cn/EN/ OR http://pmbjb.csu.edu.cn/EN/Y2020/V25/I1/51

[1] YI H, XU G P, CHENG H G, et al.An overview of utilization of steel slag[J]. Procedia Environmental Sciences, 2012(16): 791-801.
[2] 张朝晖, 廖杰龙, 巨建涛, 等. 钢渣处理工艺与国内外钢渣利用技术[J]. 钢铁研究学报, 2013(7): 5-8.
ZHANG Zhaohui, LIAO Jielong, JU Jiantao, et al.Treatment process and utilization technology of steel slag in shina and abroad[J]. Journal of Iron and Steel Research, 2013(7): 5-8.
[3] ZHANG H, HONG X.An overview for the utilization of wastes from stainless steel industries[J]. Resources Conservation and Recycling, 2011, 55(8): 745-754.
[4] 韦选纯, 汤盛文, 何真, 等. 聚乙烯醇纤维增强钢渣粉-水泥复合材料基本力学性能及微观结构[J]. 复合材料学报, 2019, 36(8): 1918-1925.
WEI Xuanchun, TANG Shengwen, HE Zhen, et al.Mechanical and microstructural characteristics of polyvinyl alcohol fiber reinforced cementitious composites containing steel slag powder[J]. Acta Materiae Compositae Sinica, 2019, 36(8): 1918-1925.
[5] 王强, 黎梦圆, 石梦晓. 水泥-钢渣-矿渣复合胶凝材料的水化特性[J]. 硅酸盐学报, 2014, 42(5): 629-634.
WANG Qiang, LI Mnegyuan, SHI Mengxiao.Hydration properties of cement-steel slag-ground granulated blast furnace slag complex binder[J]. Journal of the Chinese Ceramic Society, 2014, 42(5): 629-634.
[6] HOU J W, LV Y, LIU J X, et al.Expansibility of cement paste with tri-component f-CaO in steel slag[J]. Materials and Structures, 2018, 51(5): 113.
[7] PENG Y Z, HU S G, DING Q G.Preparation of reactive powder concrete using fly ash and steel slag powder[J]. Journal of Wuhan University of Technology (Mater Sci), 2010, 25(2): 349-354.
[8] DUAN S Y, LIAO H Q, SONG H P, et al.Performance improvement to ash-cement blocks by adding ultrafine steel slag collected from a supersonic steam-jet smasher[J]. Construction and Building Materials, 2019, 212: 140-148.
[9] 陈美祝, 周明凯, 伦云霞, 等. 钢渣高附加值利用模式分析[J].中国矿业, 2006, 15(6): 79-83.
CHEN Meiju, ZHOU Mingkai, LUN Yunxia, et al.Research on high added value utilization of steel slag[J]. China Mining Magazine, 2006, 15(6): 79-83.
[10] ZHU X, HOU H, HUANG X, et al.Enhance hydration properties of steel slag using grinding aids by mechanochemical effect[J]. Construction and Building Materials, 2012, 29: 476-481.
[11] 逄博. 碳化钢渣骨料及混凝土的制备和性能研究[D]. 济南: 济南大学, 2016.
PANG Bo.Preparation and property investigation of carbonated steel slag aggregate and concrete[D]. Jinan: University of Jinan, 2016.
[12] 李喜才. 矿渣粉磨设备选择浅析[J]. 水泥, 2018(9): 45-47.
LI Xicai.Analysis for equipment selection of slag grinding[J]. Cement, 2018(9): 45-47.
[13] 王雅萍, 陈海焱, 朱目成. 过热蒸汽气流磨粉碎实验研究[J]. 西南科技大学学报, 2008, 23(3): 62-66.
WANG Yaping, CHEN Haiyi, ZHU Mucheng.Experimental studies on the jet mill with superheated steam[J]. Journal of Southwest University of Science and Technology, 2008, 23(3): 62-66.
[14] 邱洁, 林龙沅, 钱云楼, 等. 蒸汽动能磨粉碎腔内颗粒加速特性的数值模拟[J]. 中国粉体技术, 2016(4): 1-6.
QIU Jie, LIN Longruan, QIAN Yunlou, et al.Numerical simulation of particles acceleration characteristics in fluidized bed superheated steam jet mill[J]. China Powder Science and Technology, 2016 (4): 1-6.
[15] ZHAO J H, WANG D M, WANG X G, et al.Ultrafine grinding of fly ash with grinding aids: Impact on particle characteristics of ultrafine fly ash and properties of blended cement containing ultrafine fly ash[J]. Construction and Building Materials, 2015, 78: 250-259.
[16] Ohlberg S M, Strickler D W.Determination of percent crystallinity of partly devitrified glass by X-ray diffraction[J]. Journal of the American Ceramic Society, 1962, 45(4): 170-171.