|
|
Microstructure and damping properties of B4C particle reinforced Mg composites for motor fabricated by reactive infiltration method |
QI Guanran |
Equipment Engineering Department, Henan Technical College of Construction, Zhengzhou 450064, China |
|
|
Abstract Using B4C particles and Mg ingot as raw materials, B4C/Mg composites with 30% B4C mass fraction for motor were prepared by reactive infiltration method. The micro structure and damping properties of materials prepared at different temperatures were analyzed and tested. The results show that the irregular B4C particles are evenly distributed in the matrix of B4C/Mg composites, and no macroscopic holes are formed. A white layer of carbide and boride is formed at the edge of B4C particles. Compared with the Mg matrix, the damping performance of B4C/Mg composite is significantly improved. With the increase of strain amplitude, the damping property of B4C/Mg composite material shows a change rule of slow increase first and then rapid increase. The lower the preparation temperature, the better the damping property of the material. The Cranato-lucke curve varies linearly in the amplitude of finite strain.
|
Received: 23 April 2019
Published: 14 November 2019
|
|
|
|
|
[1] 余挺, 王东新, 秦春, 等. 微重力磁场对Cu-SiCp/AZ80复合材料组织及性能的影响[J]. 特种铸造及有色合金, 2018, 38(10): 1112-1115. YU Ting, WANG Dongxin, QIN Chun, et al.Effects of microgravity magnetic field on microstructure and properties of Cu-SiCp/AZ80 composites[J]. Special Casting and Non-ferrous Alloys, 2008, 38(10): 1112-1115. [2] 石悠, 刘桂荣, 张亚东, 等. 国产B4C颗粒增强铝基复合材料的耐辐照性能研究[J]. 粉末冶金工业, 2018, 28(2): 30-34. SHI You, LIU Guirong, ZHANG Yadong, et al.Study on irradiation resistance of domestic B4C particle reinforced aluminum matrix composites[J]. Powder Metallurgy Industry, 2018, 28(2): 30-34. [3] LI Q Y, LI J, HE G.Compressive properties and damping capacities of magnesium reinforced with continuous steel wire[J]. Mater Sci Eng A, 2017, 680: 92-101. [4] HABIBI M K, HAMOUDA A M S. Enhancing tensile and compressive strength of magnesium using ball milled Al+CNT reinforcement[J]. Compos Sci Technol, 2012, 72: 290-298. [5] CARALHO O, MIRANDA G, BUCIUMEANU M, et al.High temperature damping behavior and dynamic Young’s modulus of AlSi-CNT-SiCp hybrid composite[J]. Compos Struct, 2016, 141: 155-163. [6] WANG C J, DENG K K, LIANG W.High temperature damping behavior controlled by submicron SiCp in bimodal size particle reinforced magnesium matrix composite[J]. Mater Sci Eng A, 2016, 668: 55-58. [7] DENG K K, LI J C, NIE K B, et al.High temperature damping behavior of as-deformed Mg matrix influenced by micron and submicron SiCp[J]. Mater Sci Eng A, 2015, 624: 62-70. [8] PRASAD D S, SHOBA C.Experimental evaluation onto the damping behavior of Al/SiC/RHA hybrid composites[J]. J Mater Res Technol, 2016, 5: 123-130. [9] JIANG H J, LIU C Y, ZHANG B, et al.Simultaneously improving mechanical properties and damping capacity of Al- Mg-Si alloy through friction stir processing[J]. Mater Charact, 2017, 131: 425-430. [10] WU Y W, WU K, NIE K B, et al.Damping capacities and tensile properties in Grp/AZ91 and SiCp/Grp/AZ91 magnesium matrix composites[J]. Mater Sci Eng A, 2010, 527: 7873-7877. [11] GU J H, ZHANG X N, QIU Y F, et al.Damping behaviors of magnesium matrix composites reinforced with Cu-coated and uncoated SiC particulates[J]. Compos Sci Technol, 2005, 65: 1736-1742. [12] MAZAHERY A, SHABANI M O.Mechanical properties of squeeze-cast A356 composites reinforced with B4C particulates[J]. Journal of Materials Engineering and Performance, 2012, 21(2): 247-252. [13] HUANG W Z, LUO H J, MU Y L, et al.Low-frequency damping behavior of closed-cell Mg alloy foams reinforced with SiC particles[J]. Int J Min Metall Mater, 2017, 24: 701-707. [14] YAO Y T, CHEN L Q.Processing of B4C particulate-reinforced magnesium-matrix composites by metal-assisted melt infiltration technique[J]. J Mater Sci Technol, 2014, 30: 661-665. |
|
|
|