|
|
|
| Forming parameter optimization and electrolytic polishing of lattice structures in laser powder bed fusion NiTi alloy |
| ZHAO Junzhe1, YANG Rui1, WANG Minbo1,2,3, CHAI Yuqing1, PENG Yue1, ZHENG Dan2 |
1. School of Materials Science and Engineering, Hunan University of Science and Technology, Xiangtan 411201, China;
2. State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China;
3. CNNC Jianzhong Nuclear Fuel Co., Ltd, Yibin 644000, China |
|
|
|
|
Abstract NiTi alloys, known for their shape memory effect, superelasticity, and excellent biocompatibility, are widely used in aerospace and biomedical fields. In this study, Ni50.95Ti alloys were fabricated via laser powder bed fusion to systematically investigate the effects of laser power and scanning speed on metallurgical defects and microhardness. The microstructural features of the scan and build surfaces under optimal processing conditions were characterized, and the regulation effect of electrolytic polishing on the surface morphology of lattice nodes was evaluated. Results show that low scanning speeds (450, 550 mm/s) tend to induce cracks, while higher scanning speeds (650~850 mm/s) significantly improve densification, however, energy densities above 110 J/mm3 promote pore formation. Under optimal parameters (135 W, 650 mm/s), the alloys consisted of B2 austenite and B19′ martensite exhibit〈100〉//BD and〈110〉//BD textures, and are crack-free. Electrolytic polishing for 3 min effectively remove unmelted powders, produce a smooth and pit-free surface, providing process support for the application of lattice-structured NiTi alloys in biomedical field.
|
|
Received: 16 July 2025
Published: 10 March 2026
|
|
|
|
|
|
[1] HOU H L, SIMSEK E, MA T, et al.Fatigue-resistant high-performance elastocaloric materials made by additive manufacturing[J]. Science, 2019, 366(6469): 1116-1121.
[2] XUE L, ATLI K C, PICAK S, et al.Controlling martensitic transformation characteristics in defect-free NiTi shape memory alloys fabricated using laser powder bed fusion and a process optimization framework[J]. Acta Materialia, 2021, 215: 117017.
[3] PARVIZI S, HASHEMI S M, ASGARINIA F, et al.Effective parameters on the final properties of NiTi-based alloys manufactured by powder metallurgy methods: a review[J]. Progress in Materials Science, 2021, 117: 100739.
[4] SAUD S N, HAMZAH E, ABUBAKAR T, et al.Microstructure and corrosion behaviour of Cu-Al-Ni shape memory alloys with Ag nanoparticles[J]. Materials and Corrosion, 2015, 66(6): 527-534.
[5] XU J W.Effects of Gd addition on microstructure and shape memory effect of Cu-Zn-Al alloy[J]. Journal of Alloys and Compounds, 2008, 448(1/2): 331-335.
[6] ZAMBRANO O A, LOGÉ R E.Dynamic recrystallization study of a Fe-Mn-Si based shape memory alloy in constant and variable thermomechanical conditions[J]. Materials Characterization, 2019, 152: 151-161.
[7] SAM J, FRANCO B, MA J, et al.Tensile actuation response of additively manufactured nickel-titanium shape memory alloys[J]. Scripta Materialia, 2018, 146: 164-168.
[8] ZHENG Dan, LI Ruidi, YUAN Tiechui, et al.Microstructure and mechanical property of additively manufactured NiTi alloys: a comparison between selective laser melting and directed energy deposition[J]. Journal of Central South University, 2021, 28(4): 1028-1042.
[9] 吴慧婷, 李瑞迪, 康景涛, 等. 织构对激光定向能量沉积Ni50.8Ti形状记忆合金超弹性的影响[J]. 粉末冶金材料科学与工程, 2024, 29(1): 63-73.
WU Huiting, LI Ruidi, KANG Jingtao, et al.Effect of texture on the superelasticity of Ni50.8Ti shape memory alloy for laser directed energy deposition[J]. Materials Science and Engineering of Powder Metallurgy, 2024, 29(1): 63-73.
[10] HABERLAND C, ELAHINIA M, WALKER J M, et al.On the development of high quality NiTi shape memory and pseudoelastic parts by additive manufacturing[J]. Smart Materials and Structures, 2014, 23(10): 104002.
[11] ELAHINIA M, MOGHADDAM N S, ANDANI M T, et al.Fabrication of NiTi through additive manufacturing: a review[J]. Progress in Materials Science, 2016, 83: 630-663.
[12] BHAGYARAJ J, RAMAIAH K V, SAIKRISHNA C N, et al.Behavior and effect of Ti2Ni phase during processing of NiTi shape memory alloy wire from cast ingot[J]. Journal of Alloys and Compounds, 2013, 581: 344-351.
[13] SEOK S, ONAL C D, CHO K J, et al.Meshworm: a peristaltic soft robot with antagonistic nickel titanium coil actuators[J]. IEEE/ASME Transactions on Mechatronics, 2013, 18(5): 1485-1497.
[14] KIM D H, LEE M G, KIM B, et al.A superelastic alloy microgripper with embedded electromagnetic actuators and piezoelectric force sensors: a numerical and experimental study[J]. Smart Materials and Structures, 2005, 14(6): 1265-1272.
[15] TAN C L, ZOU J, LI S, et al.Additive manufacturing of bio-inspired multi-scale hierarchically strengthened lattice structures[J]. International Journal of Machine Tools and Manufacture, 2021, 167: 103764.
[16] KAYA E, KAYA İ.A review on machining of NiTi shape memory alloys: the process and post process perspective[J]. International Journal of Advanced Manufacturing Technology, 2019, 100: 2045-2087.
[17] XUE L, ATLI K C, ZHANG C, et al.Laser powder bed fusion of defect-free NiTi shape memory alloy parts with superior tensile superelasticity[J]. Acta Materialia, 2022, 229: 117781.
[18] JIANG S Y, ZHANG Y Q.Microstructure evolution and deformation behavior of as-cast NiTi shape memory alloy under compression[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(1): 90-96.
[19] LI B Y, RONG L J, LI Y Y, et al.Synthesis of porous Ni-Ti shape-memory alloys by self-propagating high- temperature synthesis: reaction mechanism and anisotropy in pore structure[J]. Acta Materialia, 2000, 48(15): 3895-3904.
[20] BISWAS A.Porous NiTi by thermal explosion mode of SHS: processing, mechanism and generation of single phase microstructure[J]. Acta Materialia, 2005, 53(5): 1415-1425.
[21] ZHANG J L, SONG B, YANG L, et al.Microstructure evolution and mechanical properties of TiB/Ti6Al4V gradient-material lattice structure fabricated by laser powder bed fusion[J]. Composites Part B: Engineering, 2020, 202: 108417.
[22] ZHANG L, SONG B, YANG L, et al.Tailored mechanical response and mass transport characteristic of selective laser melted porous metallic biomaterials for bone scaffolds[J]. Acta Biomaterialia, 2020, 112: 298-315.
[23] ZHANG L, SONG B, CHOI S K, et al.A topology strategy to reduce stress shielding of additively manufactured porous metallic biomaterials[J]. International Journal of Mechanical Sciences, 2021, 197: 106331.
[24] ZHANG C, ZHU J K, ZHENG H, et al.A review on microstructures and properties of high entropy alloys manufactured by selective laser melting[J]. International Journal of Extreme Manufacturing, 2020, 2(3): 032003.
[25] CHEN W L, YANG Q, HUANG S K, et al.Laser power modulated microstructure evolution, phase transformation and mechanical properties in NiTi fabricated by laser powder bed fusion[J]. Journal of Alloys and Compounds, 2021, 861: 157959.
[26] WEI S S, SONG B, ZHANG Y J, et al.Mechanical response of triply periodic minimal surface structures manufactured by selective laser melting with composite materials[J]. Acta Metallurgica Sinica (English Letters), 2022, 35(3): 397-410.
[27] WEN S F, GAN J, LI F, et al.Research status and prospect of additive manufactured nickel-titanium shape memory alloys[J]. Materials, 2021, 14(16): 4496.
[28] ZHONG S Y, ZHANG L, LI Y, et al.Superelastic and robust NiTi alloys with hierarchical microstructures by laser powder bed fusion[J]. Additive Manufacturing, 2024: 90: 104319.
[29] XIONG Z W, LI H H, YANG H, et al.Micro laser powder bed fusion of NiTi alloys with superior mechanical property and shape recovery function[J]. Additive Manufacturing, 2022, 57: 102960.
[30] WU S B, LEI Z L, LI B W, et al.Hot cracking evolution and formation mechanism in 2195 Al-Li alloy printed by laser powder bed fusion[J]. Additive Manufacturing, 2022, 54: 102762.
[31] CUNNINGHAM R, ZHAO C, PARAB N, et al.Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed X-ray imaging[J]. Science, 2019, 363(6429): 849-852.
[32] WEI M, DING W J, VASTOLA G, et al.Quantitative study on the dynamics of melt pool and keyhole and their controlling factors in metal laser melting[J]. Additive Manufacturing, 2022, 54: 102779.
[33] ZHANG Q H, CHANG Y J, GU L, et al.Study of microstructure of nickel-based superalloys at high temperatures[J]. Scripta Materialia, 2017, 126: 55-57.
[34] 康景涛, 刘子豪, 郑聃, 等. Ni含量对激光粉末床熔融成形NiTi形状记忆合金显微组织和力学性能的影响[J]. 铸造技术, 2023, 44(7): 649-656.
KANG Jingtao, LIU Zihao, ZHENG Dan, et al.Effects of Ni concentration on microstructures and mechanical properties of NiTi alloys fabricated via laser powder bed fusion[J]. Foundry Technology, 2023, 44(7): 649-656.
[35] KANG J T, LI R D, ZHENG D, et al.Tailoring the microstructure, martensitic transformation temperature and mechanical properties of 4D printed NiTi alloys[J]. Smart Manufacturing, 2022, 1(2): 2240003.
[36] ZHU J M, WU H H, WU Y, et al.Influence of Ni4Ti3 precipitation on martensitic transformations in NiTi shape memory alloy: R phase transformation[J]. Acta Materialia, 2021, 207: 116665.
[37] WEI S S, ZHANG J L, ZHANG L, et al.Laser powder bed fusion additive manufacturing of NiTi shape memory alloys: a review[J]. International Journal of Extreme Manufacturing, 2023, 5(3): 032001.
[38] SUN S H, ISHIMOTO T, HAGIHARA K, et al.Excellent mechanical and corrosion properties of austenitic stainless steel with a unique crystallographic lamellar microstructure via selective laser melting[J]. Scripta Materialia, 2019, 159: 89-93.
[39] 徐晨. 基于选区激光熔化-电解抛光工艺制备镍钛合金心血管支架及生物相容性研究[D]. 淄博: 山东理工大学, 2024.
XU Chen.Preparation of nickel-titanium alloy cardiovascular stents and biocompatibility study based on selective laser melting-electropolishing process[D]. Zibo: Shandong University of Technology, 2024.
[40] TIAN H, SCHRYVERS D, LIU D, et al.Stability of Ni in nitinol oxide surfaces[J]. Acta Biomaterialia, 2011, 7(2): 892-899. |
|
|
|
2026, Vol. 31 
