氩气雾化制备新型镍基高温合金粉末的微观结构和性能

doi:10.19976/j.cnki.43-1448/TF.2021044

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (904 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract New nickel-based superalloy powder for selective laser melting with a total mass fraction of Al and Ti less than 4% was prepared by argon atomization. The composition, phase, morphology, microstructure and properties of the new nickel-based superalloy powder were characterized. The results show that the total mass fraction of Al and Ti in the new nickel-based superalloy powder was 3.82%. Small particle size powder (particle size<20 μm) has a compact interior structure, mainly cellular structure, and uniformly composition, and its micro-hardness (HV) reaches 265. As the particle size of the powder increases, the number of dendrites in the powder increases, and solidification shrinkage pore and particle-coating defect appear in some large-diameter (particle size>40 μm) powder. After sieving, the powder with a particle size of 15-44 μm has a concentrated particle size distribution, a median diameter D_V50 of 19.7 μm, the flow- ability and apparent density are 15.14 s/50 g and 4.15 g/cm³, respectively.

Key words： argon atomization nickel-based superalloy microstructure powder properties total content of Al and Ti

Received: 31 March 2021 Published: 22 December 2021

ZTFLH:

TG146.1

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	NONG Bizhong
	ZHANG Yazhou
	LIU Zuming
	WEI Bing
	CAO Bin

Cite this article:

NONG Bizhong,ZHANG Yazhou,LIU Zuming, et al. Microstructure and properties of new nickel-based superalloy powder prepared by argon atomization[J]. Materials Science and Engineering of Powder Metallurgy, 2021, 26(6): 547-553.

URL:

http://pmbjb.csu.edu.cn/EN/10.19976/j.cnki.43-1448/TF.2021044 OR http://pmbjb.csu.edu.cn/EN/Y2021/V26/I6/547

[1] 贾建, 陶宇, 张义文, 等. 第三代粉末冶金高温合金René104的研究进展[J]. 粉末冶金工业, 2007, 17(3): 36-43.
JIA Jian, TAO Yu, ZHANG Yiwen, et al.Recent development of the third generation P/M superalloy René104[J]. Powder Metallurgy Industry, 2007, 17(3): 36-43.
[2] 郭茂文, 刘春荣, 郑雪萍, 等. 粉末高温合金的研究现状[J]. 热加工工艺, 2017, 46(20): 11-13.
GUO Maowen, LIU Chunrong, ZHENG Xueping, et al.Research status of powder superalloys[J]. Hot Working Technology, 2017, 46(20): 11-13.
[3] 韩志宇, 曾光, 梁书锦, 等. 镍基高温合金粉末制备技术的发展现状[J]. 中国材料进展, 2014, 33(12): 748-755.
HAN Zhiyu, ZENG Guang, LIANG Shujin, et al.Development in powder production technology of Ni-based superalloy[J]. Materials China, 2014, 33(12): 748-755.
[4] DEBROY T, WEI H L, ZUBACK J S, et al.Additive manufacturing of metallic components-Process, structure and properties[J]. Progress in Materials Science, 2018, 92(5): 112-224.
[5] YAP C Y, CHUA C K, DONG Z L, et al.Review of selective laser melting: Materials and applications[J]. Applied Physics Reviews, 2015, 2(4): 041101.
[6] NI M, CHEN C, WANG X, et al.Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing[J]. Materials Science and Engineering A, 2017, 701: 344-351.
[7] AMATO K N, GAYTAN S M, MURR L E, et al.Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting[J]. Acta Materialia, 2012, 60(5): 2229-2239.
[8] CLOOTS M, UGGOWITZER P J, WEGENER K.Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles[J]. Materials & Design, 2016, 89: 770-784.
[9] QIU C, CHEN H, LIU Q, et al.On the solidification behaviour and cracking origin of a nickel-based superalloy during selective laser melting[J]. Materials Characterization, 2019, 148: 330-344.
[10] DIVYA V D, MUÑOZ-MORENO R, MESSÉ O M D M, et al. Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment[J]. Materials Characterization, 2016, 114: 62-74.
[11] WANG X, CARTER L N, PANG B, et al.Microstructure and yield strength of SLM-fabricated CM247LC Ni-superalloy[J]. Acta Materialia, 2017, 128: 87-95.
[12] PENG K, DUAN R, LIU Z, et al.Cracking behavior of René104 nickel-based superalloy prepared by selective laser melting using different scanning strategies[J]. Materials (Basel), 2020, 13(9): 1-13.
[13] WEI B, LIU ZM, NONG BZ, et al.Microstructure, cracking behavior and mechanical properties of René 104 superalloy fabricated by selective laser melting[J]. Journal of Alloys and Compounds, 2021, 867: 158377.
[14] 段然曦, 黄伯云, 刘祖铭, 等. René104镍基高温合金选区激光熔化成形及开裂行为[J]. 中国有色金属学报, 2018, 28(8): 1568-1578.
DUAN Ranxi, HUANG Baiyun, LIU Zuming, et al.Selective laser melting fabrication and cracking behavior of René104 nickel-based superalloy[J]. The Chinese Journal of Nonferrous Metals, 2018, 28(8): 1568-1578.
[15] YANG J, LI F, WANG Z, et al.Cracking behavior and control of René104 superalloy produced by direct laser fabrication[J]. Journal of Materials Processing Technology, 2015, 225: 229-239.
[16] HENDERSON M B, ARRELL D, LARSSON R, et al.Nickel based superalloy welding practices for industrial gas turbine applications[J]. Science and Technology of Welding and Joining, 2004, 9(1): 13-21.
[17] 杨倩. IN738合金粉末特性及其选区激光熔化成形性能研究[D]. 兰州: 兰州理工大学, 2019.
YANG Qian.Study on the powder characteristics and forming properties in selective laser melting of IN738 alloy[D]. Lanzhou: Lanzhou University of Technology, 2019.
[18] 苏鹏飞, 刘祖铭, 郭旸, 等. 氩气雾化René104镍基高温合金粉末的显微组织和凝固缺陷[J]. 中南大学学报(自然科学版), 2018, 49(1): 64-71.
SU Pengfei, LIU Zuming, GUO Yang, et al.Microstructure and solidification defects of René104 nickel-based superalloy powder atomized by argon[J]. Journal of Central South University (Science and Technology), 2018, 49(1): 64-71.
[19] MOURER D P B, BACKMAN, DANIEL GUSTOV MELROSE. Ni bassed superalloy and its use gas turbine disks, shafts,impellers: US 1666618A1[P].2006-01-27.
[20] DÉPINOY S, SENNOUR M, FERHAT L, et al. Experimental determination of solute redistribution behavior during solidification of additively manufactured 316L[J]. Scripta Materialia, 2021, 194: 113663.
[21] 王黎, 魏青松, 贺文婷, 等. 粉末特性与工艺参数对SLM成形的影响[J]. 华中科技大学学报(自然科学版), 2012, 40(6): 20-23.
WANG Li, WEI Qingsong, HE Wenting, et al.Influence of powder characteristics and process parameters on SLM formability[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2012, 40(6): 20-23.