陈鹏旭 , 刘旭东 , 豆艳坤 , 贺新福 . 反应堆用难熔合金疲劳性能和断裂韧性研究进展[J]. 粉末冶金材料科学与工程, 2026 , 31(2) : 113 -124 . DOI: 10.19976/j.cnki.43-1448/TF.2026001

[1] MATHEW M D.Nuclear energy: a pathway towards mitigation of global warming[J]. Progress in Nuclear Energy, 2022, 143: 104080.
[2] ROGNER H H.Nuclear power and sustainable development[J]. Journal of International Affairs, 2010: 64(1): 137-163.
[3] KARAKOSTA C, PAPPAS C, MARINAKIS V, et al.Renewable energy and nuclear power towards sustainable development: characteristics and prospects[J]. Renewable and Sustainable Energy Reviews, 2013, 22: 187-197.
[4] 许增裕. 聚变材料研究的现状和展望[J]. 原子能科学技术, 2003, 37(S1): 105-110.
XU Zengyu.Status and expectation of fusion materials research and development[J]. Atomic Energy Science and Technology, 2003, 37(S1): 105-110.
[5] 吴玉程. 核聚变堆用W及其合金辐照损伤行为研究进展[J]. 金属学报, 2019, 55(8): 939-950.
WU Yucheng.Research progress in irradiation damage behavior of tungsten and its alloys for nuclear fusion reactor[J]. Acta Metallurgica Sinica, 2019, 55(8): 939-950.
[6] Nuclear Energy Agency.Handbook on lead-bismuth eutectic alloy and lead properties, materials compatibility, thermal-hydraulics and technologies: 2015 edition[R]. Paris: Organisation for Economic Co-operation and Development, 2015.
[7] ROMEDENNE M, PINT B A.Corrosion in sodium fast reactors[R]. Washington, DC: U.S. Nuclear Regulatory Commission, 2021.
[8] MATHEW M D, LAHA K, SANDHYA R.Creep and low cycle fatigue behaviour of fast reactor structural materials[J]. Procedia Engineering, 2013, 55: 17-26.
[9] YAMASHITA H, ASAYAMA T.Structural materials for sodium cooled fast reactors[M]//BALBAUD-CÉLÉRIER F, CABET C. Materials and Processes for Nuclear Energy Today and in the Future. Hoboken: John Wiley & Sons, Inc., 2024: 145.
[10] FÜTTERER M A, FU L, SINK C, et al. Status of the very high temperature reactor system[J]. Progress in Nuclear Energy, 2014, 77: 266-281.
[11] HAYNER G O, BRATTON R L, WRIGHT R N, et al.Next generation nuclear plant materials research and development program plan[R]. Idaho Falls: Idaho National Laboratory, 2005.
[12] ROPER R, HARKEMA M, SABHARWALL P, et al.Molten salt for advanced energy applications: a review[J]. Annals of Nuclear Energy, 2022, 169: 108924.
[13] FEDERICI G, BIEL W, GILBERT M R, et al.European DEMO design strategy and consequences for materials[J]. Nuclear Fusion, 2017, 57(9): 092002.
[14] ZINKLE S J, SNEAD L L.Designing radiation resistance in materials for fusion energy[J]. Annual Review of Materials Research, 2014, 44: 241-267.
[15] BOLT H, BARABASH V, KRAUSS W, et al.Materials for the plasma-facing components of fusion reactors[J]. Journal of Nuclear Materials, 2004, 329: 66-73.
[16] FEDERICI G.Plasma wall interactions in ITER[J]. Physica Scripta, 2006, T124: 1-8.
[17] LASSNER E, SCHUBERT W D.Tungsten: Properties, Chemistry, Technology of the Element, Alloys, and Chemical Compounds[M]. New York: Springer, 2012.
[18] ZHAO J C, WESTBROOK J H.Ultrahigh-temperature materials for jet engines[J]. MRS Bulletin, 2003, 28(9): 622-630.
[19] ZINKLE S J, WIFFEN F W.Radiation effects in refractory alloys[C]//EL-GENK M S. AIP Conference Proceedings: Volume 699, Issue 1. College Park, MD: American Institute of Physics, 2004: 733-740.
[20] WAS G S, PETTI D, UKAI S, et al.Materials for future nuclear energy systems[J]. Journal of Nuclear Materials, 2019, 527: 151837.
[21] ZINKLE S J, WAS G S.Materials challenges in nuclear energy[J]. Acta Materialia, 2013, 61(3): 735-758.
[22] 曾毅, 孙院军, 安耿, 等. 核反应堆用钼铼合金结构材料研究进展[J]. 粉末冶金技术, 2023, 41(4): 307-314.
ZENG Yi, SUN Yuanjun, AN Geng, et al.Research progress of Mo-Re alloy structural materials used for nuclear reactors[J]. Powder Metallurgy Technology, 2023, 41(4): 307-314.
[23] 张晨, 杨金学, 张怡卓, 等. 难熔高熵合金的辐照效应研究进展[J]. 原子能科学技术, 2025, 59(8): 1565-1584.
ZHANG Chen, YANG Jinxue, ZHANG Yizhuo, et al.Research progress on irradiation effect of refractory high-entropy alloy[J]. Atomic Energy Science and Technology, 2025, 59(8): 1565-1584.
[24] HABAINY J, IYENGAR S, LEE Y, et al.Fatigue behavior of rolled and forged tungsten at 25, 280 and 480 ℃[J]. Journal of Nuclear Materials, 2015, 465: 438-447.
[25] HABAINY J, LÖVBERG A, IYENGAR S, et al. Fatigue properties of tungsten from two different processing routes[J]. Journal of Nuclear Materials, 2018, 506: 83-91.
[26] TANVIR G, KARIM M A, KIM N, et al.High-cycle tensile-tensile fatigue performance of niobium alloy: conventional vs wire-arc additive manufacturing[J]. Journal of Materials Research and Technology, 2025, 35: 98-109.
[27] SOMMERAUER M, SELIGMANN B, GOTTLIEB H, et al.Enhanced thermomechanical fatigue resistance in W10Re alloys: microstructural and surface engineering approaches[J]. Nuclear Materials and Energy, 2024, 41: 101769.
[28] GUAN W H, NOGAMI S, FUKUDA M, et al.Tensile and fatigue properties of potassium doped and rhenium containing tungsten rods for fusion reactor applications[J]. Fusion Engineering and Design, 2016, 109: 1538-1542.
[29] MANSON S S.Fatigue: a complex subject: some simple approximations[J]. Experimental Mechanics, 1965, 5: 193-226.
[30] SONG W L, XU L J, LI N, et al.Effect of zirconia on low cycle fatigue and energy absorption of molybdenum alloy[J]. Journal of Alloys and Compounds, 2021, 867: 159118.
[31] XU Z N, XU L J, SONG W L, et al.Evaluating low cycle fatigue property of nanoscale ZrO₂ particles strengthening molybdenum alloy[J]. Vacuum, 2022, 203: 111170.
[32] XIE Z M, MIAO S, LIU R, et al.Recrystallization and thermal shock fatigue resistance of nanoscale ZrC dispersion strengthened W alloys as plasma-facing components in fusion devices[J]. Journal of Nuclear Materials, 2017, 496: 41-53.
[33] CHENG P M, ZHANG Z J, ZHANG G J, et al.Low cycle fatigue behaviors of pure Mo and Mo-La₂O₃ alloys[J]. Materials Science and Engineering A, 2017, 707: 295-305.
[34] ZHANG X X, YAN Q Z, LANG S T, et al.Thermal shock and fatigue resistance of tungsten materials under transient heat loading[J]. Journal of Nuclear Materials, 2014, 455(1/2/3): 537-543.
[35] XU L, CHEN H, JIA Y F, et al.Revealing effects of creep damage on high-temperature fatigue behavior for HfNbTiZr refractory high-entropy alloys: experimental investigation and crystal-plasticity modelling[J]. Journal of Materials Science & Technology, 2025, 231: 134-150.
[36] LI Y, VERMEIJ T, HOEFNAGELS J P M, et al. Influence of porosity and blistering on the thermal fatigue behavior of tungsten[J]. Nuclear Fusion, 2022, 62(7): 076039.
[37] MADAY M F.Low cycle fatigue behaviour of TZM molybdenum alloy in divertor water coolant[J]. Journal of Nuclear Materials, 1996, 233: 1397-1402.
[38] TERENTYEV D, VILÉMOVÁ M, YIN C, et al. Assessment of mechanical properties of SPS-produced tungsten including effect of neutron irradiation[J]. International Journal of Refractory Metals and Hard Materials, 2020, 89: 105207.
[39] XIONG B W, CAI C C, WANG Z J.Microstructures and room temperature fracture toughness of Nb/Nb₅Si₃ composites alloyed with W, Mo and W-Mo fabricated by spark plasma sintering[J]. Journal of Alloys and Compounds, 2014, 604: 211-216.
[40] SUN B, WANG Q Q, CHEN Y X, et al.Design of heterogeneous structure for enhancing formation quality of laser-manufactured WTaMoNb refractory high-entropy alloy[J]. Journal of Alloys and Compounds, 2023, 953: 170066.
[41] GAO Q, LIU H, CHEN P J.Investigation of elevated temperature microstructural stability and tribological behavior of Mo_xNbTiZr refractory high-entropy alloy coatings optimized by Mo-doping[J]. Tribology International, 2024, 194: 109544.
[42] HOHENWARTER A, WURSTER S, VÖLKER B. Fracture of severely plastically deformed Ta and Nb[J]. International Journal of Refractory Metals and Hard Materials, 2017, 64: 143-150.
[43] MOSCHETTI M, HOHENWARTER A, ALFREIDER M, et al.Fracture toughness investigations of an ion-irradiated nanocrystalline TiZrNbHfTa refractory high-entropy alloy[J]. Advanced Engineering Materials, 2024, 26(19): 2400541.
[44] FALESCHINI M, KREUZER H, KIENER D, et al.Fracture toughness investigations of tungsten alloys and SPD tungsten alloys[J]. Journal of Nuclear Materials, 2007, 367: 800-805.
[45] MUTOH Y, ICHIKAWA K, NAGATA K, et al.Effect of rhenium addition on fracture toughness of tungsten at elevated temperatures[J]. Journal of Materials Science, 1995, 30(3): 770-775.
[46] PILLMEIER S, ŽÁK S, PIPPAN R, et al. Exploring the fracture toughness and fatigue crack growth behavior of MoRe alloys[J]. International Journal of Refractory Metals and Hard Materials, 2025, 127: 106969.
[47] STURM D, HEILMAIER M, SCHNEIBEL J H, et al.The influence of silicon on the strength and fracture toughness of molybdenum[J]. Materials Science and Engineering A, 2007, 463(1/2): 107-114.
[48] WANG S P, MA E, XU J.Notch fracture toughness of body-centered-cubic (TiZrNbTa)Mo high-entropy alloys[J]. Intermetallics, 2018, 103: 78-87.
[49] WURMSHUBER M, ALFREIDER M, WURSTER S, et al.Small-scale fracture mechanical investigations on grain boundary doped ultrafine-grained tungsten[J]. Acta Materialia, 2023, 250: 118878.
[50] COCKERAM B V.The role of stress state on the fracture toughness and toughening mechanisms of wrought molybdenum and molybdenum alloys[J]. Materials Science and Engineering A, 2010, 528(1): 288-308.
[51] ZENG S, ZHU Y H, LI W, et al.A single-phase Ti₃Zr_1.5NbVA_l0.25 refractory high entropy alloy with excellent combination of strength and toughness[J]. Materials Letters, 2022, 323: 132548.
[52] XU F D, CHEN D Z, CHEN R R, et al.Exploring NbSi based alloys with excellent fracture toughness and oxidation resistance[J]. Materials Characterization, 2024, 215: 114220.
[53] GUO Y L, JIA L N, KONG B, et al.Microstructure and fracture toughness of Nb-Si based alloys with Ta and W additions[J]. Intermetallics, 2018, 92: 1-6.
[54] WANG Q, WANG X W, CHEN R R, et al.Microstructure evolution and fracture toughness of Nb-Si-Ti based alloy with Cr, Mo and W elements addition[J]. Intermetallics, 2022, 140: 107408.
[55] ZHAO T Y, WANG Q, CHEN R R, et al.Optimization of Zr and Mo element on room-temperature fracture toughness and the integrity of oxide film[J]. Journal of Materials Research and Technology, 2023, 26: 5683-5695.
[56] GIETL H, OLBRICH S, RIESCH J, et al.Estimation of the fracture toughness of tungsten fibre-reinforced tungsten composites[J]. Engineering Fracture Mechanics, 2020, 232: 107011.
[57] LIU D Q, ZHAO W Q, CHEN G K, et al.High strength refractory high-entropy alloy matrix composites reinforced with in-situ formed Al₂O₃ particles[J]. International Journal of Refractory Metals and Hard Materials, 2025, 133: 107368.
[58] CHEN C, YANG S Y, LIU R, et al.The interfacial microstructure and fracture toughness of W/Ta multilayer composites[J]. Materials Science and Engineering A, 2022, 831: 142272.
[59] YIN C, TERENTYEV D, VAN DYCK S, et al.Effect of high-temperature neutron irradiation on fracture toughness of ITER-specification tungsten[J]. Physica Scripta, 2020, T171(1): 014052.
[60] COCKERAM B V.Measuring the fracture toughness of molybdenum-0.5 pct titanium-0.1 pct zirconium and oxide dispersion-strengthened molybdenum alloys using standard and subsized bend specimens[J]. Metallurgical and Materials Transactions A, 2002, 33(12): 3685-3707.
[61] COCKERAM B V, BYUN T S, LEONARD K J, et al.Post-irradiation fracture toughness of unalloyed molybdenum, ODS molybdenum, and TZM molybdenum following irradiation at 244 ℃ to 507 ℃[J]. Journal of Nuclear Materials, 2013, 440(1/2/3): 382-413.
[62] RAMACHANDRAN K, JAYAKODY Y C, JAYASEELAN D D.Oxidation behaviour and its effect on fracture toughness of niobium metal[J]. International Journal of Refractory Metals and Hard Materials, 2023, 110: 106033.