[1] ZHANG R, HAN B, LU T J.Confinement effects on compressive and ballistic performance of ceramics: a review[J]. International Materials Reviews, 2021, 66(5): 287-312.
[2] WU S, XU Z, HU C, et al.Numerical simulation study of ballistic performance of Al2O3/aramid-carbon hybrid FRP laminate composite structures subject to impact loading[J]. Ceramics International, 2022, 48(5): 6423-6235.
[3] 徐国军, 张俊, 郑兴伟, 等. 金属蜂窝增强陶瓷复合装甲抗侵彻性能研究[J]. 弹箭与制导学报, 2019, 39(2): 92-96.
XU Guojun, ZHANG Jun, ZHENG Xingwei, et al.Study on penetration resistance of ceramic composite armor reinforced by metal honeycomb[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2019, 39(2): 92-96.
[4] TAN X H, ZHANG X J, FENG L H, et al.Research on the ballistic limit velocity and resistance to repeated impacts of ceramic composite[J]. Journal of Ballistics, 2023, 35(4): 88-96.
[5] WANG X D, XU Y J, DONG F D, et al.Numerical simulation of penetration resistance of kevlar and ceramic composite structures[J]. Defence Technology, 2022, 43(9): 2360-2366.
[6] 汪勇峰. SiC陶瓷/UHMWPE纤维复合材料复合装甲抗侵彻性能的数值模拟研究[D]. 杭州: 浙江理工大学, 2023.
WANG Yongfeng.Numerical simulation study of anti- penetration peformance of SiC/UHMWPE composite armor[D]. Hangzhou: Zhejiang Sci-Tech University, 2023.
[7] TIAN C, LI Z P.The research status of lightweight anti penetration ceramic composite structures[J]. Ordnance Material Science and Engineering, 2023, 46(5): 142-153.
[8] 张自强, 张锐生, 赵宝荣, 等. 装甲防护技术基础[M]. 北京: 兵器工业出版社, 2000: 228-259.
ZHANG Ziqiang, ZHANG Ruisheng, ZHAO Baorong, et al.Basics of Armor Protection Technology[M]. Beijing: National Defence Industry Press, 2000: 228-259.
[9] 郑贺龄. 带负载的穿甲弹侵彻有限厚度靶板研究[D]. 沈阳: 沈阳理工大学, 2023.
ZHENG Heling.Study on armor-piercing projectile with load penetrating target with finite thickness[D]. Shenyang: Shenyang Ligong University, 2023.
[10] YANG R, LI K W, YIN L K, et al.Study on the penetration power of ZrO2 toughened Al2O3 ceramic composite projectile into ceramic composite armor[J]. Materials, 2022, 15(8): 24-26.
[11] LI Y P, XU Y X, ZHANG J, et al.Test and simulation of SiC ceramic/UHMWPE fiber composite structure against 12.7 mm armor piercing incendiary projectile[J]. Acta Armamentarii, 2022, 43(6): 1355-1364.
[12] 焦志刚, 马明超. 陶瓷复合靶板抗侵彻性能数值仿真[J]. 兵器装备工程学报, 2018, 39(12): 1-4.
JIAO Zhigang, MA Mingchao.Numerical simulation of penetration resistance of ceramic composite target[J]. Journal of Ordnance Equipment Engineering, 2018, 39(12): 1-4.
[13] 刘亚坤, 坚永鑫, 孔寒冰, 等. 微量Y和Si掺杂对MoAlB陶瓷显微组织和力学性能的影响[J]. 粉末冶金材料科学与工程, 2023, 28(4): 329-337.
LIU Yakun, JIAN Yongxin, KONG Hanbing, et al.Effect of trace Y and Si doping on microstructure and mechanical properties of MoAlB ceramics[J]. Materials Science and Engineering of Powder Metallurgy, 2023, 28(4): 329-337.
[14] 周星宇, 刘美玲, 曹雅璟, 等. SiC晶须增强高熵合金黏结Ti(C,N)金属陶瓷的性能研究[J]. 粉末冶金材料科学与工程, 2023, 28(6): 554-564.
ZHOU Xingyu, LIU Meiling, CAO Yajing, et al.Properties of SiC whisker reinforced high entropy alloy bonded Ti(C,N) cermet[J]. Materials Science and Engineering of Powder Metallurgy, 2023, 28(6): 554-564.
[15] 鲍瑞, 张文府, 易健宏, 等. 粉末冶金法制备协同增强铜基复合材料的研究进展[J]. 粉末冶金材料科学与工程, 2022, 27(1): 1-12.
BAO Rui, ZHANG Wenfu, YI Jianhong, et al.Progress in preparation of synergistic reinforced copper matrix composites by powder metallurgy[J]. Materials Science and Engineering of Powder Metallurgy, 2022, 27(1): 1-12.
[16] ÜBEYLI M, YILDIRIM R O, ÖGEL B.On the comparison of the ballistic performance of steel and laminated composite armors[J]. Materials and Design, 2007, 28(4): 1257-1262.
[17] 武一丁, 高光发, 王晓东. 不同速度下B4C陶瓷/铝合金轻型复合靶板抗侵彻行为研究[J]. 南京理工大学学报, 2023, 47(4): 503-513.
WU Yiding, GAO Guangfa, WANG Xiaodong.Study on penetration resistance of B4C/aluminum alloy lightweight composite target at different speeds[J]. Journal of Nanjing University of Science and Technology, 2023, 47(4): 503-513.
[18] ZHANG Z, SONG B, WANG X B, et al.Research status and trend of design and addictive manufacturing for mechanical metamaterials with energy absorption[J]. Chinese Journal of Lasers, 2022, 49(14): 1-14.
[19] 刘欣, 齐方方, 徐文龙, 等. 约束陶瓷复合装甲的研究现状[J]. 铁合金, 2021, 52(6): 46-48.
LIU Xin, QI Fangfang, XU Wenlong, et al.Research status of restrained ceramic composite armor[J]. Ferro-Alloys, 2021, 52(6): 46-48.
[20] NING J G, REN H L, GUO T T, et al.Dynamic response of alumina ceramics impacted by long tungsten projectile[J]. International Journal of Impact Engineering, 2013, 62: 60-74.
[21] GUO C, ZHANG X F, XIONG W.Cumulative damage effect on shock initiation of covered composition B by dual EFP impacts[J]. Chinese Journal of Energetic Materials, 2023, 31(8): 797-807.
[22] GE B B, ZHANG X F, TAN M T, et al.Study on the oblique penetration process and response characteristics of the long-rod projectile impacting into ceramic composite targets[J]. Transactions of Beijing Institute of Technology, 2023, 43(12): 1249-1264.
[23] 龚宣丞. 陶瓷复合材料装甲抗侵彻性能研究[D]. 长沙: 湖南大学, 2020.
GONG Xuancheng.Study on penetration resistance of ceramic composite armor[D]. Changsha: Hunan University, 2020.
[24] GOU R J, SUN D, ZHANG B.Anti-jet penetration performances of the ceramic/aluminum foam/aluminum alloy composite armor[J]. Chinese Jouranal of Energetic Materials, 2017, 25(6): 451-458.
[25] 王和平, 王智慧. 陶瓷约束效应对复合装甲抗弹性能的影响[J]. 兵器材料科学与工程, 2008(2): 61-64.
WANG Heping, WANG Zhihui.Effect of ceramic restraint on bullet resistance of composite armor[J]. Ordnance Material Science and Engineering, 2008(2): 61-64.
[26] MEI Z Y, ZHU X, LIU Y H, et al.The developments of fibre-reinforced composite laminates under ballistic impact[J]. Advances in Mechanics, 2003, 33(3): 375-388.
[27] 汪勇峰, 蒋培清, 张波, 等. 背板层间粘结性能对SiC/UHMWPE复合装甲防弹性能影响的数值分析[J]. 现代纺织技术, 2023, 31(5): 1-11.
WANG Yongfeng, JIANG Peiqing, ZHANG Bo, et al.Numerical analysis of the effect of adhesion between back plates on bulletproof performance of SiC/UHMWPE composite armor[J]. Advanced Textile Technology, 2023, 31(5): 1-11.
[28] YADAV S, RAVICHANDRAN G.Penetration resistance of laminated ceramic/polymer structures[J]. International Journal of Impact Engineering, 2003, 28(5): 557-574.
[29] TIAN C, SUN Q, AN X Y, et al.Influences of ceramic constraint on protection performances of ceramic-metal hybrid structures under impact loads[J]. International Journal of Mechanical Sciences, 2019, 159: 81-90.
[30] 曹凌宇, 罗兴柏, 刘国庆, 等. 侧向约束陶瓷抗侵彻性能试验研究[J]. 装甲兵工程学院学报, 2018, 32(5): 76-80.
CAO Lingyu, LUO Xingbai, LIU Guoqing, et al.Experimental study on penetration resistance of laterally confined ceramics[J]. Journal of Academy of Armored Force Engineering, 2018, 32(5): 76-80.
[31] MA Z Y, ZENG S Y, JIANG Z G.Numerical analysis of the ballistic performance of confined ceramic composite targets against long rod penetrators[J]. Journal of University of Science and Technology of China, 2007, 37(7): 727-731.
[32] 郑伟, 喻琳峰, 顾靖伟. 周向约束对泡沫铝陶瓷复合结构抗弹性能的影响[J]. 动力学与控制学报, 2021, 19(5): 39-45.
ZHENG Wei, YU Linfeng, GU Jingwei.Effect of circumferential restraint on bullet resistance of aluminum foam ceramic composite structure[J]. Journal of Dynamics and Control, 2021, 19(5): 39-45.
[33] NEMAT-NASSER S, SARVA S.Micro-mechanisms of compression failure[J]. Ceramic transactions, 2002, 134: 403-419.
[34] SUN J, HUANG X Z, DU Z J, et al.Effect of confinement mechanisms on performance of ceramic composite targets[J]. Journal of Central South University of Science and Technology, 2011, 42(11): 3331-3336.
[35] YUNGWIRTH C J, O'CONNOR J, ZAKRAYSEK A, et al. Explorations of hybrid sandwich panel concepts for projectile impact mitigation[J]. Journal of the American Ceramic Society, 2011, 94(1): 62-75.
[36] 孙昕, 田超, 孙启添, 等. 金属封装多层陶瓷复合结构抗侵彻性能[J]. 兵工学报, 2020, 41(2): 69-75.
SUN Xin, TIAN Chao, SUN Qitian, et al.Penetration resistance of metal encapsulated multilayer ceramic composite structure[J]. Acta Armamentarii, 2020, 41(2): 69-75.
[37] 闫学增, 林文松, 方宁象, 等. 金属封装陶瓷复合材料制备方法的研究进展[J]. 轻工机械, 2015, 33(6): 102-105.
YAN Xuezeng, LIN Wensong, FANG Ningxiang, et al.Progress in the preparation of metal encapsulated ceramic composites[J]. Light Industry Machinery, 2015, 33(6): 102-105.
[38] 王倩男. 压力浸渗法制备金属封装陶瓷球复合装甲及其抗侵彻性能研究[D]. 长沙: 国防科技大学, 2022.
WANG Qiannan.Preparation of ceramic ball composite armor with pressure impregnation and its penetration resistance[D]. Changsha: University of Defense Technology, 2022.
[39] 张明朗. 抗超高速冲击金属-陶瓷复合结构电弧增材工艺方法[D]. 南京: 南京理工大学, 2023.
ZHANG Minglang.Arc augmentation process for superhigh speed impact resistant metal-ceramic composite structure[D]. Nanjing: Nanjing University of Science and Technology, 2023.
[40] YU Z Q, WU G H, SUN D L.Research on effects of reinforcement coating on the wettability of Al/ceramic interface[J]. Special Casting & Nonferrous Alloys, 2003, 1(2): 32-34.
[41] 王恒. 7A52铝合金-Al2O3陶瓷复合结构封接工艺研究[D]. 南京: 南京理工大学, 2020.
WANG Heng.Study on sealing technology of 7A52 aluminum alloy-Al2O3 ceramic composite structure[D]. Nanjing: Nanjing University of Science and Technology, 2020.
[42] LIU G W, NI C Y, XIAO Q W, et al.Preparation and interface structures of metal-encased SiC composite armors with interpenetrating structure[J]. Rare Metal Materials and Engineering, 2011, 40(12): 2076-2079.
[43] 罗通. 纤维约束陶瓷复合靶板的制备及抗弹性能研究[D]. 北京: 北京理工大学, 2015.
LUO Tong.Preparation of fiber confined ceramic composite target and its bulletproof performance[D]. Beijing: Beijing University of Science and Technology, 2015.
[44] LIU F, JIANG Z G, SHEN Z Q, et al.A study on the mechanism of ceramic composite target with 3D constraints against non-central impact of 30 mm projectile[J]. Acta Armamentarii, 2010, 31(7): 975-981.
[45] 任文科, 高光发, 朴春华, 等. 碳化硼陶瓷复合靶板抗侵彻性能实验研究[J]. 高压物理学报, 2019, 33(4): 149-156.
REN Wenke, GAO Guangfa, PIAO Chunhua, et al.Experimental study of ballistic performance for boron carbide ceramic composite targets[J]. Chinese Journal of High Pressure Physics, 2019, 33(4): 149-156.
[46] JOHNSEN J, HOLMEN J K, MYHR O R, et al.A nano-scale material model applied in finite element analysis of aluminium plates under impact loading[J]. Computational Materials Science, 2013, 79: 724-735.
[47] RUBIN M B, VAYIG Y, ROSENBERG Z.An approximate contact pressure for normal penetration of rigid ogive projectiles into metal targets[J]. International Journal of Impact Engineering, 2022, 168: 1-14.
[48] XIA X C, LI Y Q, HOU H L, et al.Effect of constraints on the penetration resistance of ceramic/steel composite target plate[J]. Chinese Journal of High Pressure Physics, 2023, 37(2): 143-158.