|
|
|
| Microstructure and deformation mechanism of (Fe45Mn35Co10Cr10)99C1 high-entropy alloy by laser powder bed fusion |
| LI Xianglong1, GENG Zhaowen1, CHEN Chao1, LUO Jinru2, ZHOU Kechao1 |
1. Powder Metallurgy Research Insitute, Central South University, Changsha 410083, China;
2. Department of ?Iron and Steel Metallurgy, University of Science and Technology Beijing, Beijing 100083, China |
|
|
|
|
Abstract FeMnCoCrC high-entropy alloys were fabricated using laser powder bed fusion (LPBF) from pre-alloyed (Fe45Mn35Co10Cr10)99C1 gas-atomized powder. The effects of LPBF process parameters on the microstructure and mechanical properties of the alloy were investigated by scanning electron microscope, transmission electron microscope, X-ray diffractometer, and room-temperature tensile test, with the aim of elucidating the underlying deformation mechanisms. The results indicate that the FeMnCoCrC high-entropy alloy exhibits a stable single-phase FCC structure, with randomly oriented grains and no significant texture. Furthermore, rich dislocation cell structures formed during the LPBF process, while no carbide precipitation is observed. The alloy fabricated under the optimal parameters (laser power of 120 W and scanning speed of 400 mm/s) demonstrates a enhanced yield strength while maintaining good elongation, achieving a yield strength of 603 MPa, a tensile strength of 850 MPa, and an elongation of 44.0%. The plastic deformation mechanism of the FeMnCoCrC high-entropy alloy is primarily governed by dislocation slip and twinning-induced plasticity, which collectively contribute to a sustained work-hardening capacity. In contrast, the martensite-induced plasticity mechanism is completely suppressed during deformation.
|
|
Received: 19 March 2025
Published: 27 November 2025
|
|
|
|
|
|
[1] LI Z M, PRADEEP K G, DENG Y, et al.Metastable high-entropy dual-phase alloys overcome the strength- ductility trade-off[J]. Nature, 2016, 534(7606): 227-230.
[2] LI Z M, TASAN C C, SPRINGER H, et al.Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys[J]. Scientific Reports, 2017, 7: 40704.
[3] RITCHIE R O.The conflicts between strength and toughness[J]. Nature Materials, 2011, 10(11): 817-822.
[4] YANG F, DONG L M, CAI L, et al.Mechanical properties of FeMnCoCr high entropy alloy alloyed with C/Si at low temperatures[J]. Journal of Alloys and Compounds, 2021, 859: 157876.
[5] FU Z H, WU P F, ZHU S Y, et al.Effects of interstitial C and N on hydrogen embrittlement behavior of non-equiatomic metastable FeMnCoCr high-entropy alloys[J]. Corrosion Science, 2022, 194: 109933.
[6] SU Z X, SHI T, YANG J X, et al.The effect of interstitial carbon atoms on defect evolution in high entropy alloys under helium irradiation[J]. Acta Materialia, 2022, 233: 117955.
[7] 杨紫微, 陈超, 吴谊友, 等. 选区激光熔化成形Al-Ce-Sc-Zr合金的工艺优化与组织性能[J]. 粉末冶金材料科学与工程, 2023, 28(2): 170-179.
YANG Ziwei, CHEN Chao, WU Yiyou, et al.Process optimization, microstructure and mechanical properties of Al-Ce-Sc-Zr alloy by selective laser melting[J]. Materials Science and Engineering of Powder Metallurgy, 2023, 28(2): 170-179.
[8] 艾永康, 刘祖铭, 张亚洲, 等. 选区激光熔融制备Cu-Cr-Nb-Ce合金组织与性能的高温稳定性[J]. 粉末冶金材料科学与工程, 2022, 27(5): 478-487.
AI Yongkang, LIU Zuming, ZHANG Yazhou, et al.High-temperature stability of microstructure and properties of Cu-Cr-Nb-Ce alloy fabricated by selective laser melting[J]. Materials Science and Engineering of Powder Metallurgy, 2022, 27(5): 478-487.
[9] LI R D, NIU P D, YUAN T C, et al.Displacive transformation as pathway to prevent micro-cracks induced by thermal stress in additively manufactured strong and ductile high-entropy alloys[J]. Transactions of Nonferrous Metals Society of China, 2021, 31(4): 1059-1073.
[10] ZHANG W, SHEN J J, OLIVEIRA J P, et al.Deformation processes of additively manufactured interstitial- strengthened high entropy alloy: in-situ high-energy synchrotron X-ray diffraction and microstructural appraisal[J]. Additive Manufacturing, 2023, 76: 103791.
[11] ZHANG W Y, YAN D S, LU W J, et al.Carbon and nitrogen co-doping enhances phase stability and mechanical properties of a metastable high-entropy alloy[J]. Journal of Alloys and Compounds, 2020, 831: 154799.
[12] CHEN L B, WEI R, TANG K, et al.Heavy carbon alloyed FCC-structured high entropy alloy with excellent combination of strength and ductility[J]. Materials Science and Engineering A, 2018, 716: 150-156.
[13] HE M Y, SHEN Y F, JIA N, et al.C and N doping in high-entropy alloys: a pathway to achieve desired strength- ductility synergy[J]. Applied Materials Today, 2021, 25: 101162.
[14] LIU X L, ZHAO X R, CHEN J, et al.Effect of C addition on microstructure and mechanical properties of as-cast HEAs (Fe50Mn30Co10Cr10)100-xCx[J]. Materials Chemistry and Physics, 2020, 254: 123501.
[15] GUO Z H, JING S R, YU M H, et al.Effects of rolling at different temperatures and subsequent recovery annealing on the mechanical properties of a metastable carbon containing FeMnCoCr high-entropy alloy[J]. Materials Characterization, 2024, 217: 114328.
[16] CHABOK A, ZHANG W, SHEN J J, et al.On the orientation-dependent mechanical properties of interstitial solute-strengthened Fe49.5Mn30Co10Cr10C0.5 high entropy alloy produced by directed energy deposition[J]. Additive Manufacturing, 2024, 79: 103914.
[17] GALY C, LE GUEN E, LACOSTE E, et al.Main defects observed in aluminum alloy parts produced by SLM: from causes to consequences[J]. Additive Manufacturing, 2018, 22: 165-175.
[18] WEI K W, ZENG X Y, HUANG G, et al.Selective laser melting of Ti-5Al-2.5Sn alloy with isotropic tensile properties: the combined effect of densification state, microstructural morphology, and crystallographic orientation characteristics[J]. Journal of Materials Processing Technology, 2019, 271: 368-376.
[19] WEI S L, KIM J, TASAN C C.Boundary micro-cracking in metastable Fe45Mn35Co10Cr10 high-entropy alloys[J]. Acta Materialia, 2019, 168: 76-86.
[20] DEBROY T, WEI H L, ZUBACK J S, et al.Additive manufacturing of metallic components: process, structure and properties[J]. Progress in Materials Science, 2018, 92: 112-224.
[21] SAEED-AKBARI A, IMLAU J, PRAHL U, et al.Derivation and variation in composition-dependent stacking fault energy maps based on subregular solution model in high-manganese steels[J]. Metallurgical and Materials Transactions A, 2009, 40(13): 3076-3090.
[22] ZHU Z G, AN X H, LU W J, et al.Selective laser melting enabling the hierarchically heterogeneous microstructure and excellent mechanical properties in an interstitial solute strengthened high entropy alloy[J]. Materials Research Letters, 2019, 7(11): 453-459.
[23] LIU L F, DING Q Q, ZHONG Y, et al.Dislocation network in additive manufactured steel breaks strength-ductility trade-off[J]. Materials Today, 2018, 21(4): 354-361.
[24] WANG Y M, VOISIN T, MCKEOWN J T, et al.Additively manufactured hierarchical stainless steels with high strength and ductility[J]. Nature Materials, 2018, 17(1): 63-71.
[25] SINGH P, PICAK S, SHARMA A, et al.Martensitic transformation in Fe??Mn80-??Co10Cr10 high-entropy alloy[J]. Physical Review Letters, 2021, 127(11): 115704.
[26] YANG Z B, LU S, TIAN Y Z, et al.Theoretical and experimental study of phase transformation and twinning behavior in metastable high-entropy alloys[J]. Journal of Materials Science & Technology, 2022, 99: 161-168.
[27] GAN K F, YAN D S, ZHU S Y, et al.Interstitial effects on the incipient plasticity and dislocation behavior of a metastable high-entropy alloy: nanoindentation experiments and statistical modeling[J]. Acta Materialia, 2021, 206: 116633.
[28] SCHNEIDER M, LAPLANCHE G.Effects of temperature on mechanical properties and deformation mechanisms of the equiatomic CrFeNi medium-entropy alloy[J]. Acta Materialia, 2021, 204: 116470.
[29] ZHANG W, WANG H, KOOI B J, et al.Additive manufacturing of interstitial-strengthened high entropy alloy: scanning strategy dependent anisotropic mechanical properties[J]. Materials Science and Engineering A, 2023, 872: 144978. |
|
|
|
2025, Vol. 30 
