|
|
|
| Fracture failure behavior and dynamic recrystallization of pure tungsten under deformation at ultra-high strain rates |
| CHEN Xun, HUANG Yufeng, ZHANG Lei, CHEN Boshan, LIU Wensheng, MA Yunzhu |
| National Key Laboratory of Science and Technology for National Defense on High-strength Structural Materials, Central South University, Changsha 410083, China |
|
|
|
|
Abstract The laser shock loading technique was used to achieve dynamic load on powder metallurgy sintered and molten tungsten at ultra-high strain rates. Polycrystalline tungsten’s damage characteristics and microstructure were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). And the effects of holes on the failure behavior and dynamic recrystallization (DRX) mechanism of polycrystalline tungsten was investigated. The results show that fracture along the grain still dominates the failure mode of polycrystalline tungsten at ultra-high strain rates. Holes at grain boundaries and inside grains become the origin of fracture failure of the material under dynamic loading. The reflection of shock waves by the holes causes a continuous concentration of stress around the holes. Many dislocations form and tangle, resulting in a rapid increase in deformation storage energy. Sintered tungsten exhibits numerous equiaxed recrystallization after shock loading at higher shock pressure. The degree of recrystallization decreases as the shock wave decays with thickness.
|
|
Received: 18 March 2022
Published: 15 November 2022
|
|
|
|
|
|
[1] BUTLER B G, PARAMORE J D, LIGDA J P, et al.Mechanisms of deformation and ductility in tungsten-a review[J]. International Journal of Refractory Metals and Hard Materials, 2018, 75: 248-261.
[2] HONEYCOMBE R W K, PETHEN R W. Dynamic recrystallization[J]. Journal of the Less Common Metals, 1972, 28(2): 201-212.
[3] 孙亚丽, 谢敬佩, 郝世明, 等. 30%SiCp/Al复合材料热变形及动态再结晶行为[J]. 粉末冶金材料科学与工程, 2016, 21(1): 8-17.
SUN Yali, XIE Jingpei, HAO Shiming, et al.Hot deformation and dynamic recrystallization behavior of 30%SiCp/Al composite[J]. Materials Science and Engineering of Powder Metallurgy, 2016, 21(1): 8-17.
[4] 经福谦. 动高压原理与技术[M]. 北京: 国防工业出版社, 2006: 179-215.
JING Fuqian.Dynamic High-pressure Generation Principle and Related Technologies[M]. Beijing: National Defense Industry Press, 2006: 179-215.
[5] MILLER P I.High Strain-rate material behavior by short pulse laser-generated stress waves[D]. Washington: University of Washington, 2014.
[6] 孙金奎, 张秀丽, 熊佳. 装甲与反装甲弹药的较量(上)[J].坦克装甲车辆, 2016(13): 35-40.
SUN Jinkui, ZHANG Xiuli, XIONG Jia.The battle between armor and anti-armor ammunition (Volume 1)[J]. Tank Armoured Vehicles, 2016(13): 35-40.
[7] 贾梦晔, 高永宏, 周鹏飞, 等. 药型罩材料与结构的研究进展[J]. 兵器装备工程学报, 2022, 43(1): 10-18.
JIA Mengye, GAO Yonghong, ZHOU Pengfei, et al.Research progress of material and structure of drug-type cover[J]. Journal of Ordnance Equipment Engineering, 2022, 43(1): 10-18.
[8] PIZAA C, ESQUIVEL E V, MURR L E, et al.The role of dynamic recrystallization in [001] single-crystal W and W-Ta alloy ballistic rod penetration into steel targets[J]. Journal of Materials Science, 2005, 40(18):4849-4857.
[9] GUO W, LI S K, WANG F C, et al.Dynamic recrystallization of tungsten in a shaped charge liner[J]. Scripta Materialia, 2009, 60(5): 329-332.
[10] 周静怡, 刘金旭, 李树奎, 等. 爆炸加载条件下CVD高纯钨的变形机制[J]. 稀有金属材料与工程, 2013, 42(1): 80-83.
ZHOU Jingyi, LIU Jinxu, LI Shukui, et al.Deformation mechanism of CVD high-purity tungsten under explosive loading conditions[J]. Rare Metal Materials and Engineering, 2013, 42(1): 80-83.
[11] 百晓丹, 陈逊, 马运柱, 等. 极端应变率下钨孔洞演化及其力学响应的分子动力学模拟[J]. 粉末冶金材料科学与工程, 2020, 25(4): 288-295.
BAI Xiaodan, CHEN Xun, MA Yunzhu, et al.Molecular dynamics simulation of void evolution and its mechanical response in single-crystal tungsten under extreme strain rate[J]. Materials Science and Engineering of Powder Metallurgy, 2020, 25(4): 288-295.
[12] LINDL J.Development of the indirect-drive approach to inertial confinement fusion and the target physics basis for ignition and gain[J]. Physics of Plasmas, 1995, 2(11): 3933-4024.
[13] CHEN X, HUANG Y F, ZHNAG L, et al.Spallation of polycrystalline tungsten using laser-induced shock at ultrahigh strain rates[J]. International Journal of Impact Engineering, 2022, 166: 104243.
[14] SCHNEIDER M S, KAD B K, MEYERS M A, et al.Laser-induced shock compression of copper: Orientation and pressure decay effects[J]. Metallurgical and Materials Transactions A, 2004, 35(9): 2633-2646.
[15] YANG Y, ZHANG H, QIAO H.Microstructure characteristics and formation mechanism of TC17 titanium alloy induced by laser shock processing[J]. Journal of Alloys & Compounds, 2018, 767(30): 253-258.
[16] MEYERS M A.Dynamic Behavior of Materials[M]. New York: Wiley-Inter Science Press, 1994: 107-121.
[17] 贾成厂, 周武平. 钨——熔点最高的稀有金属[J]. 金属世界, 2012(6): 11-15.
JIA Chengchang, ZHOU Wuping.Tungsten —— the rare metal with the highest melting point[J]. Metal World, 2012(6): 11-15.
[18] BELYAKOV A, SAKAI T, MIURA H, et al.Continuous recrystallization in austenitic stainless steel after large strain deformation[J]. Acta Materialia, 2002, 50(6):1547-1557.
[19] ZHANG J Y, XU B, TARIQ N, et al.Microstructure evolutions and interfacial bonding behavior of Ni-based superalloys during solid state plastic deformation bonding[J]. Journal of Materials Science & Technology, 2020, 46(1): 1-11.
[20] WAN Z, SUN Y, HU L, et al.Dynamic softening behavior and microstructural characterization of TiAl-based alloy during hot deformation[J]. Materials Characterization, 2017, 130: 25-32.
[21] HUANG K, LOG R E, et al.A review of dynamic recrystallization phenomena in metallic materials[J]. Materials & Design, 2016, 111(5): 548-574.
[22] GUMBSCH P, RIEDLE J, HARTMAIER A, et al.Controlling factors for the brittle-to-ductile transition in tungsten single crystals[J]. Science, 1998, 282(5392): 1293-1295. |
|
|
|
2022, Vol. 27 
