优化钢铁热轧精轧前除磷箱的构造

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (370 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Phosphorus removal before finish rolling (remove the oxide iron on the surface of the slab after rough rolling) is the key equipment of hot rolling line. In view of the weakness of the frame of the phosphorus removal box and the deformation of the pinch roll arch existing in the high-pressure water jet phosphorus removal, the operation of the pinch roll is not smooth and the disassembly and assembly is difficult, the main column and archway of the phosphorus removal box are grooved and corroded by high pressure water, the unreasonable design of the roller cylinder resulted in a high failure rate, and the inconsistent elevation of the phosphorus removal roller transmission mechanism. In this paper, optimizing the overall structure and layout of the dephosphorization box in finishing rolling, using the U-shaped structure and increasing the strength of the pinch roll arch to ensure the stable operation of the pinch roll, adding the protective lining plate to the parts easy to be washed out of the dephosphorization box body, optimizing the installation and connection mode of the pinch roll oil cylinder, so as to reduce the failure rate of the oil cylinder. Optimize the hydraulic lubrication system such as pinch roll, dephosphorization roll and pneumatic hydraulic device of dephosphorization tank as a whole and increase the cooling of roller table and other improvement measures, improve the overall function and performance of dephosphorization tank before finishing rolling, meet the production demand on site and improve the product quality.

Key words： phosphorus removal box archway body pinch roller cylinder strength structure lubrication

Received: 19 May 2019 Published: 19 June 2020

ZTFLH:

TH136

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHAO Shengli

Cite this article:

ZHAO Shengli. Optimized hot rolling descaling box structure before finishing rolling[J]. Materials Science and Engineering of Powder Metallurgy, 2019, 24(6): 571-576.

URL:

http://pmbjb.csu.edu.cn/EN/ OR http://pmbjb.csu.edu.cn/EN/Y2019/V24/I6/571

[1] 孙志礼, 冷兴聚, 魏严刚, 等. 机械设计[M]. 沈阳: 东北大学出版社, 2000: 87-88.
SUN Zhili, LENG Xingju, WEI Yangang, et al.Mechanical Design[M]. Shenyang: Northeast University Press, 2000: 87-88.
[2] 刘鸿文. 材料力学[M]. 北京: 高等教育出版社, 1991: 23-24.
LIU Hongwen.Mechanics of Materials[M]. Beijing: Higher Education Press, 1991: 23-24.
[3] 哈尔滨工业大学理论力学教研组. 理论力学[M]. 北京: 高等教育出版社, 1997: 35-36 .
Teaching and Research Group of Theoretical Mechanics, Harbin University of Technology. Theoretical Mechanics[M]. Beijing: Higher Education Press, 1997: 35-36.
[4] 东北工学院《机械零件设计手册》编写组. 机械零件设计手册/中册[M]. 第2版. 北京: 冶金工业出版社, 1982: 68-70.
Compilation Group of Mechanical Parts Design Manual of Northeast Institute of Technology. Mechanical Parts Design Manual/Medium Book[M]. 2nd ed. Beijing: Metallurgical Industry Press, 1982: 68-70.
[5] 王国栋. 中国中厚板轧制技术与装备[M]. 北京: 冶金工业出版社, 2009: 8-9.
WANG Guodong.China Medium and Heavy Plate Rolling Technology and Equipment[M]. Beijing: Metallurgical Industry Press, 2009: 8-9.
[6] 孙桓, 陈作模. 机械原理[M]. 北京: 高等教育出版社, 2000: 33-34.
SUN Huan, CHEN Zuomo.Mechanical Principle[M]. Beijing: Higher Education Press, 2000: 33-34.
[7] 吴伊蓝. 高压水除鳞技术在热轧带钢生产上的应用田[J]. 浙江冶金, 2002(4): 012.
WU Yilan.Application field of high-pressure water descaling technology in hot-rolled strip production[J]. Zhejiang Metallurgy, 2002(4): 012.
[8] 夏先平, 孙业中. 精轧区热轧带钢表面氧化铁皮缺陷成因与预防明[J]. 轧钢, 2002, 19(3): 9-12.
XIA Xianping, SUN Yezhong.Causes and prevention of iron oxide scale defects on hot rolled strip surface in finishing rolling area[J]. Rolling, 2002, 19(3): 9-12.
[9] 卢晓江, 何迎春, 赖维. 高压水射流清洗技术及应用[M]. 北京: 化学工业出版社, 2006: 63-64.
LU Xiaojiang, HE Yingchun, LAI Wei.High-Pressure Water Jet Cleaning Technology and Application[M]. Beijing: Chemical Industry Press, 2006: 63-64.
[10] 薛念福, 李里, 陈继林, 等. 热轧带钢除鳞技术研究[J]. 钢铁钒钛, 2003, 24(3): 52-59.
XUE Nianfu, LI Li, CHEN Jilin, et al.Study on descaling technology of hot rolled strip[J]. Vanadium and Titanium, 2003, 24(3): 52-59.
[11] 赵宗波. 现代热轧带钢除鳞技术川[J]. 轧钢, 1993, 10(4): 28-28.
ZHAO Zongbo.Modern hot strip descaling technology Chuan[J]. Rolling, 1993, 10(4): 28-28.
[12] 吴祝民. 热· 带· 氧化铁皮的成因及对策[J]. 轧钢, 2007, 24(3): 22-23.
WU Zhumin.Hot belt causes and countermeasures of oxide scale[J]. Steel Rolling, 2007, 24(3): 22-23.
[13] 申明. 高压水除磷设备故障分析与处理[J]. 轻工设计, 2011, 4(2): 13-14.
SHEN Ming.Fault analysis and treatment of high-pressure water phosphorus removal equipment[J]. Light Industry Design, 2011, 4(2): 13-14.
[14] 肖鹏, 崔晓嘉, 徐良, 等. 浅谈板带钢的高精度轧制技术[J].河北冶金, 2012, 2(3): 2-3.
XIAO Peng, CUI Xiaojia, XU Liang, et al.Talking about high precision rolling technology of plate and strip steel[J]. Hebei Metallurgy, 2012, 2(3): 2-3.
[15] 中村, 王怀宇. 板坯加热时氧化铁皮的高温剥离性[J]. 宽厚板, 1997, 6(2): 15-16.
ZHONG Cun, WANG Huaiyu.High temperature peeling property of oxide scale when slab is heated[J]. Heavy Plate, 1997, 6(2): 15-16.