不同热喷涂技术制备铁基非晶涂层的结构和耐磨性能

Abstract
Figure/Table
References
Related Citation (3)

Download: PDF (1066 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The microstructure and tribological properties of Fe-based amorphous coatings which fabricated by air plasma spray (APS), high-velocity oxygen-fuel (HVOF) spray and detonation spray (DS) were compared. The relationships between spray technique, amorphous content, porosity and wear resistance behavior were investigated. Coating microstructure, cross-sectional morphology and friction surface morphology were observed by SEM. Amorphous structure of powder and coatings was examined by XRD. Wear resistance of coatings and stainless steel was tested by wear and abrasion equipment. The results show that the microstructures of the coatings are mainly composed of amorphous phase. The amorphous contents of the coatings made by various spray techniques are 79.39%, 85.26% and 88.14%, the porosity are 2.5%, 1.9% and 1.5% respectively. The detonation sprayed coating has the best wear properties, and the wear mechanism is typical fatigue wear. The coatings exhibit better wear resistance than the stainless steel substrate.

Key words： plasma spray high velocity oxy-fuel spray detonation spray iron-based amorphous coating tribological property

Received: 06 December 2018 Published: 11 July 2019

ZTFLH:

TG139⁺.8

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	XIE Lu
	XIONG Xiang
	WANG Yueming

Cite this article:

XIE Lu,XIONG Xiang,WANG Yueming. Microstructure and tribological properties of plasma, high velocity oxy-fuel and detonation sprayed iron-based coatings[J]. Materials Science and Engineering of Powder Metallurgy, 2019, 24(3): 212-219.

URL:

http://pmbjb.csu.edu.cn/EN/ OR http://pmbjb.csu.edu.cn/EN/Y2019/V24/I3/212

[1] KOMAKI M, MIMURA T, KUSUMOTO Y, et al.Formation of Fe-based amorphous coating films by thermal spraying technique[J]. Materials Transactions, 2010, 51(9): 1581-1585.
[2] KOMAKI M, MIMURA T, KURAHASI R, et al.High chromium Fe-Cr-Mo-P-C amorphous coating films produced by thermal spraying technique[J]. Materials Transactions, 2011, 52(3): 474-480.
[3] KOMAKI M, MIMURA T, KURAHASI R, et al.Influence of substrate temperature on structure and adhesion strength of Fe & N dash; Cr & N dash; P & N dash; C amorphous coating films produced by thermal spraying technique[J]. Materials Transactions, 2012, 53(4): 681-689.
[4] ZHANG Xin, WANG Zehua, LIN Jinran, et al.A study on high temperature oxidation behavior of high-velocity arc sprayed Fe-based coatings[J]. Surface and Coatings Technology, 2015, 283: 255-261.
[5] WANG Aiping, ZHANG Tao, WANG Jianqiang.Formation and properties of Ni-based amorphous metallic coating produced by HVAF thermal spraying[J]. Materials Transactions, 2005, 46(5): 1010-1015.
[6] KIM S, YAMAURA S, SHIMIZU Y, et al.Production of Ni65Cr15P16B4 metallic glass-coated bipolar plate for fuel cell[J]. Materials Transactions, 2010, 51(9): 1609-1613.
[7] SHIN Y, OHMORI Y, MORIMOTO T, et al.Formation of nano-microstructured aluminum alloy film using thermal spray gun with ultra rapid cooling[J]. Materials Transactions, 2016, 57(4): 488-493.
[8] HASEGAWA M, ENDO T, FUKUTOMI H.Effects of heat exposure time and temperature on the delamination behavior of air plasma-sprayed thermal barrier coatings under shear loading[J]. Materials Transactions, 2016, 57(7): 1138-1146.
[9] ZHOU Yangyang, MA Guozheng, WANG Haidou, et al.Fabrication and characterization of supersonic plasma sprayed Fe-based amorphous metallic coatings[J]. Materials & Design, 2016, 110: 332-339.
[10] ZHANG S D, ZHANG W L, WANG S G, et al.Characterisation of three-dimensional porosity in an Fe-based amorphous coating and its correlation with corrosion behaviour[J]. Corros Sci, 2015, 93: 211-221.
[11] KOGA G Y, NOGUEIRA R P, ROCHE V, et al.Corrosion properties of Fe-Cr-Nb-B amorphous alloys and coatings[J]. Surface and Coatings Technology, 2014, 254: 238-243.
[12] INOUE A, KONG F L, MAN Q K, et al.Development and applications of Fe- and Co-based bulk glassy alloys and their prospects[J]. J Alloy Compd, 2014, 615: S2-S8.
[13] FAKOORI HASANABADI M, MALEK GHAINI F, EBRAHIMNIA M, et al.Production of amorphous and nanocrystalline iron based coatings by electro-spark deposition process[J]. Surface and Coatings Technology, 2015, 270: 95-101.
[14] KOMAKI M, MIMURA T, TSUJI S, et al.Influence of substrate temperature on the structure and cohesive/adhesive strength of FeCoSiBNb metallic glass coating films produced by thermal spraying[J]. Materials Transactions, 2012, 53(12): 2151-2159.
[15] QIAO Jianghao, JIN Xin, QIN Jiahao, et al.A super-hard superhydrophobic Fe-based amorphous alloy coating[J]. Surface and Coatings Technology, 2018, 334: 286-291.
[16] JIANG Chaoping, XING Yazhe, ZHANG Fengying, et al.Wear resistance and bond strength of plasma sprayed Fe/Mo amorphous coatings[J]. Journal of Iron and Steel Research, International, 2014, 21(10): 969-974.
[17] ZHANG Huan, XIE Youtao, HUANG Liping, et al.Effect of feedstock particle sizes on wear resistance of plasma sprayed Fe-based amorphous coatings[J]. Surface and Coatings Technology, 2014, 258: 495-502.
[18] ZHANG Jifu, LIU Min, SONG Jinbing, et al.Microstructure and corrosion behavior of Fe-based amorphous coating prepared by HVOF[J]. J Alloy Compd, 2017, 721: 506-511.
[19] QIAO Lei, WU Yuping, HONG Sheng, et al.Relationships between spray parameters, microstructures and ultrasonic cavitation erosion behavior of HVOF sprayed Fe-based amorphous/nanocrystalline coatings[J]. Ultrasonics son- ochemistry, 2017, 39: 39-46.
[20] ZHANG C, LIU L, CHAN K C, et al.Wear behavior of HVOF-sprayed Fe-based amorphous coatings[J]. Intermetallics, 2012, 29: 80-85.
[21] WU Hong, LAN Xiaodong, LIU Yong, et al.Fabrication, tribological and corrosion behaviors of detonation gun sprayed Fe-based metallic glass coating[J]. T Nonferr Metal Soc, 2016, 26: 1629-1637.
[22] ZHOU Zheng, WANG Lu, WANG Fuchi, et al.Formation and corrosion behavior of Fe-based amorphous metallic coatings prepared by detonation gun spraying[J]. T Nonferr Metal Soc, 2009, 19: s634-s638.
[23] SURESH B P, RAO D S, RAO G V N, et al. Effect of feedstock size and its distribution on the properties of detonation sprayed coatings[J]. J Therm Spray Techn, 2007, 16: 281-290.
[24] LIU Liming, XIAO Jinkun, WEI Xinlong, et al.Effects of temperature and atmosphere on microstructure and tribological properties of plasma sprayed FeCrBSi coatings[J]. J Alloy Compd, 2018, 735(15): 586-594.
[25] DUDINA D V, ZLOBIN S B, BULINA N V, et al.Detonation spraying of TiO_2-2.5vol.% Ag powders in a reducing atmosphere[J]. Journal of the European Ceramic Society, 2012, 32: 815-821.
[26] OKANE M F S K I. Splat Behavior of Plasma Sprayed Particles on Flat Substrate Surface, in: A. Ohmori (Ed.) Proc. of Int[C]// Thermal Spray Conference High Temp. Soc. of Japan, Osaka, Japan, 1995: 353-359.
[27] MADEJSKI J.Solidification of droplet on a cold surface[J]. Int J Heat Mass Transfer, 1976,19: 1009-1020.
[28] WANG Y, ZHENG Y G, KE W, et al.Slurry erosion-corrosion behaviour of high-velocity oxy-fuel (HVOF) sprayed Fe-based amorphous metallic coatings for marine pump in sand-containing NaCl solutions[J]. Corros Sci, 2011, 53: 3177-3185.
[29] GAO Junguo, TANG Zhihui, WANG Changliang, et al.Microstructure, mechanical and oxidation characteristics of detonation gun and HVOF sprayed MCrAlYX coatings[J]. T Nonferr Metal Soc, 2015, 25: 817-823.
[30] INOUE A, SHEN B L, CHANG C T.Super-high strength of over 4000 MPa for Fe-based bulk glassy alloys in [(Fe_1-xCo_x)_0.75B_0.2Si_0.05]96Nb₄ system[J]. Acta Materialia, 2004, 52: 4093-4099.
[31] LIU Wuhan, SHIEU F S, HSIAO W T.Enhancement of wear and corrosion resistance of iron-based hard coatings deposited by high-velocity oxygen fuel (HVOF) thermal spraying[J]. Surface and Coatings Technology, 2014, 249: 24-41.
[32] AN Yulong, HOU Guoliang, CHEN Jie.Microstructure and tribological properties of iron-based metallic glass coatings prepared by atmospheric plasma spraying[J]. Vacuum, 2014, 107: 132-140.
[33] ZHANG Chunyue, CHU Zhenhua, WEI Fushuang, et al.Optimizing process and the properties of the sprayed Fe-based metallic glassy coating by plasma spraying[J]. Surface and Coatings Technology, 2017, 319: 1-5.
[34] BAINS P S, GREWAL J S, SIDHU S S, et al.Wear between ring and traveler: A pin-on-disc mapping of various detonation gun sprayed coatings[C]// Materials Today: Proceedings, 2017,4: 369-378.
[35] BABU P S, RAO D S, KRISHNA L R, et al.Weibull analysis of hardness distribution in detonation sprayed nano-structured WC-12Co coatings[J]. Surf Coat Tech, 2017, 319: 394-402.
[36] LI Zhi, ZHANG Cheng, LIU Lin.Wear behavior and corrosion properties of Fe-based thin film metallic glasses[J]. J Alloy Compd, 2015, 650: 127-135.