SPS制备SPTAs块体过程的有限元模拟及其微观组织分析

doi:10.19976/j.cnki.43-1448/TF.2024005

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (883 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract In this paper, the effects of temperature and current fields on the homogeneity of self-passivation tungsten alloys (SPTAs) prepared by spark plasma sintering (SPS) were systematically investigated by combining experiments and simulations, and the relationships between sintering temperature, sintering time, current density, and the microstructure of SPTAs were established. The results show that the temperature of the SPTAs bulks with different sizes during SPS consolidation is unevenly distributed along the radial direction, resulting in the measured temperature being much lower than the actual temperature of the samples. Combined with the microstructure characterization, it is found that increasing the current density during sample sintering can shorten the sintering time, and has a positive effect on obtaining fine-grained and homogeneous microstructure, but it is necessary to consider the difference of grain size caused by radial temperature gradient. This study can provide a reference for the SPS preparation process design of large-sized SPTAs bulks.

Key words： self-passivation tungsten alloys spark plasma sintering nuclear fusion finite element electro-thermal coupling model

Received: 12 January 2024 Published: 31 May 2024

ZTFLH:

TF124

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LÜ Kuang
	TAN Xiaoyue
	TU Qingbo
	DING Jie
	MA Yingqun
	LUO Laima
	WU Yucheng

Cite this article:

LÜ Kuang,TAN Xiaoyue,TU Qingbo, et al. Finite element simulation of the SPTAs bulks preparation process by SPS and its microstructure analysis[J]. Materials Science and Engineering of Powder Metallurgy, 2024, 29(2): 83-92.

URL:

http://pmbjb.csu.edu.cn/EN/10.19976/j.cnki.43-1448/TF.2024005 OR http://pmbjb.csu.edu.cn/EN/Y2024/V29/I2/83

[1] LANG E.The Role of Active Elements in the Oxidation Behaviour of High Temperature Metals and Alloys[M]. London: Elsevier Applied Science, 2012: 33-51.
[2] KOCH F, BOLT H.Self passivating W-based alloys as plasma facing material for nuclear fusion[J]. Physica Scripta, 2007, T128: 100-105.
[3] CALVO A, GARCÍA-ROSALES C, KOCH F, et al. Manufacturing and testing of self-passivating tungsten alloys of different composition[J]. Nuclear Materials and Energy, 2016, 9: 422-429.
[4] LITNOVSKY A, KLEIN F, TAN X, et al.Advanced self-passivating alloys for an application under extreme conditions[J]. Metals, 2021, 11(8): 1255.
[5] WANG W J, TAN X Y, YANG S P, et al.The influence of powder characteristics on densification behavior and microstructure evolution of W-Cr-Zr alloy consolidated by field-assisted sintering technology[J]. International Journal of Refractory Metals and Hard Materials, 2022, 108: 105939.
[6] GARAY J E.Current-activated, pressure-assisted densification of materials[J]. Annual Review of Materials Research, 2010, 40: 445-468.
[7] WANG W J, TAN X Y, LIU J Q, et al.The influence of heating rate on W-Cr-Zr alloy densification process and microstructure evolution during spark plasma sintering[J]. Powder Technology, 2020, 370: 9-18.
[8] HU Z Y, ZHANG Z H, CHENG X W, et al.A review of multi-physical fields induced phenomena and effects in spark plasma sintering: fundamentals and applications[J]. Materials & Design, 2020, 191: 108662.
[9] LITNOVSKY A, WEGENER T, KLEIN F, et al.New oxidation-resistant tungsten alloys for use in the nuclear fusion reactors[J]. Physica Scripta, 2017, T170: 014012.
[10] BACHURINA D, TAN X Y, KLEIN F, et al.Self-passivating smart tungsten alloys for DEMO: a progress in joining and upscale for a first wall mockup[J]. Tungsten, 2021, 3(1): 101-115.
[11] WANG W J, TAN X Y, YANG S P, et al.On grain growth and phase precipitation behaviors during W-Cr-Zr alloy densification using field-assisted sintering technology[J]. International Journal of Refractory Metals and Hard Mater, 2021, 98: 105552
[12] WEGENER T, KLEIN F, LITNOVSKY A, et al.Development of yttrium-containing self-passivating tungsten alloys for future fusion power plants[J]. Nuclear Materials and Energy, 2016, 9: 394-398.
[13] YANG S P, WANG W J, TAN X Y, et al.Influence of the applied pressure on the microstructure evolution of W-Cr-Y-Zr alloys during the FAST process[J]. Fusion Engineering and Design, 2021, 169: 112474.
[14] ZHU H, TAN X, TU Q, et al.Effect of pressure on densification and microstructure of W-Cr-Y-Zr alloy during SPS consolidated at 1 000 ℃[J]. Metals, 2022, 12(9): 1437.
[15] GORYNSKI C, ANSELMI-TAMBURINI U, WINTERER M.Controlling current flow in sintering: a facile method coupling flash with spark plasma sintering[J]. Review of Scientific Instruments, 2020, 91(1): 015112.
[16] OLEVSKY E A, FROYEN L.Impact of thermal diffusion on densification during SPS[J]. Journal of the American Ceramic Society, 2009, 92: S122-S132.
[17] DENG S, ZHAO H, LI R, et al.The influence of the local effect of electric current on densification of tungsten powder during spark plasma sintering[J]. Powder Technology, 2019, 356: 769-777.
[18] WU Y C, FU Z Y.Study of temperature field in spark plasma sintering[J]. Materials Science and Engineering B, 2002, 90(1/2): 34-37.
[19] MINIER L, LE GALLET S, GRIN Y, et al.A comparative study of nickel and alumina sintering using spark plasma sintering (SPS)[J]. Materials Chemistry and Physics, 2012, 134(1): 243-253.
[20] ANSELMI-TAMBURINI U, GENNARI S, GARAY J E, et al.Fundamental investigations on the spark plasma sintering/synthesis process[J]. Materials Science and Engineering A, 2005, 394(1/2): 139-148.
[21] ZAVALIANGOS A, ZHANG J, KRAMMER M, et al.Temperature evolution during field activated sintering[J]. Materials Science and Engineering A, 2004, 379(1/2): 218-228.
[22] OKE S R, IGE O O, FALODUN O E, et al.Powder metallurgy of stainless steels and composites: a review of mechanical alloying and spark plasma sintering[J]. The International Journal of Advanced Manufacturing Technology, 2019, 102: 3271-3290.
[23] LEE J H, KIM I Y, KANG M K, et al.Effects of SPS mold on the properties of sintered and simulated SiC-ZrB₂ composites[J]. Journal of Electrical Engineering and Technology, 2013, 8(6): 1474-1480.
[24] MANIÈRE C, HARNOIS C, RIQUET G, et al. Flash spark plasma sintering of zirconia nanoparticles: electro-thermal- mechanical-microstructural simulation and scalability solutions[J]. Journal of the European Ceramic Society, 2022, 42(1): 216-226.
[25] OLEVSKY E A, GARCIA-CARDONA C, BRADBURY W L, et al.Fundamental aspects of spark plasma sintering: Ⅱ. finite element analysis of scalability[J]. Journal of the American Ceramic Society, 2012, 95(8): 2414-2422.
[26] LEE G, OLEVSKY E A, MANIÈRE C, et al. Effect of electric current on densification behavior of conductive ceramic powders consolidated by spark plasma sintering[J]. Acta Materialia, 2018, 144: 524-533.
[27] MANIÈRE C, DURAND L, BRISSON E, et al. Contact resistances in spark plasma sintering: from in-situ and ex-situ determinations to an extended model for the scale up of the process[J]. Journal of the European Ceramic Society, 2017, 37(4): 1593-1605.
[28] WEI X, GIUNTINI D, MAXIMENKO A L, et al.Experimental investigation of electric contact resistance in spark plasma sintering tooling setup[J]. Journal of the American Ceramic Society, 2015, 98(11): 3553-3560.
[29] ACHENANI Y, SAÂDAOUI M, CHEDDADI A, et al. Finite element modeling of spark plasma sintering: application to the reduction of temperature inhomogeneities, case of alumina[J]. Materials & Design, 2017, 116: 504-514.
[30] MANIÈRE C, PAVIA A, DURAND L, et al. Finite-element modeling of the electro-thermal contacts in the spark plasma sintering process[J]. Journal of the European Ceramic Society, 2016, 36(3): 741-748.
[31] TIWARI D, BASU B, BISWAS K.Simulation of thermal and electric field evolution during spark plasma sintering[J]. Ceramics International, 2009, 35(2): 699-708.
[32] VAN DER LAAN A, BOYER V, EPHERRE R, et al. Simple method for the identification of electrical and thermal contact resistances in spark plasma sintering[J]. Journal of the European Ceramic Society, 2021, 41(1): 599-610.
[33] VANMEENSEL K, LAPTEV A, HENNICKE J, et al.Modelling of the temperature distribution during field assisted sintering[J]. Acta Materialia, 2005, 53(16): 4379-4388.
[34] BAGHERI S M, VAJDI M, MOGHANLOU F S, et al.Numerical modeling of heat transfer during spark plasma sintering of titanium carbide[J]. Ceramics International, 2020, 46(6): 7615-7624.
[35] MAIZZA G, GRASSO S, SAKKA Y, et al.Relation between microstructure, properties and spark plasma sintering (SPS) parameters of pure ultrafine WC powder[J]. Science and Technology of Advanced Materials, 2007, 8(7/8): 644-654.
[36] CALVO A, ORDÁS N, ITURRIZA I, et al. Manufacturing of self-passivating tungsten based alloys by different powder metallurgical routes[J]. Physica Scripta, 2016, T167: 014041.
[37] FRISK K, GUSTAFSON P.An assessment of the Cr-Mo-W system[J]. Calphad, 1988, 12(3): 247-254.
[38] MANIÈRE C, DURAND L, CHEVALLIER G, et al. A spark plasma sintering densification modeling approach: from polymer, metals to ceramics[J]. Journal of Materials Science, 2018, 53: 7869-7876.
[39] DENG S, LI R, YUAN T, et al.Electromigration-enhanced densification kinetics during spark plasma sintering of tungsten powder[J]. Metallurgical and Materials Transactions A, 2019, 50: 2886-2897.
[40] VANHERCK T, JEAN G, GONON M, et al.Spark plasma sintering: homogenization of the compact temperature field for non conductive materials[J]. International Journal of Applied Ceramic Technology, 2015, 12: E1-E12.
[41] MANIÈRE C, LEE G, MCKITTRICK J, et al. Energy efficient spark plasma sintering: breaking the threshold of large dimension tooling energy consumption[J]. Journal of the American Ceramic Society, 2019, 102(2): 706-716.