|
|
|
| Current-carrying friction performance of Cu-Graphite-CNTs in wind power slip rings at low currents |
| SHI Xiongwei2, ZHANG Xin1, KANG Xiao3, WU Liuchen1, XIAO Li2 |
1. School of Materials Science and Engineering, Xinjiang University, Urumqi 830017, China;
2. School of Mechanical Engineering, Xinjiang University, Urumqi 830017, China;
3. State Key Laboratory of Powder metallurgy, Central South University, Changsha 410083, China |
|
|
|
|
Abstract This study prepared Cu-Graphite-CNTs composites with varying composition ratios (CNTs mass fraction is 0.1%-1%, Graphite mass fraction is 10%-20%), and current-carrying friction tests were conducted at 0, 1, 3, and 5 A. The friction and wear behavior of the composites was characterized using scanning electron microscope, energy dispersive spectrometer, and Raman spectrometer. And the effects of composition ratios and current on the current-carrying friction performance were investigated. Results indicate that current indirectly affects friction performance by influencing the continuity and integrity of the lubricating film. At 0 A, a fragmented film induces adhesive-abrasive wear, resulting in a high and fluctuating friction factor. Between 1-3 A, moderate Joule heating promotes lubricating film formation, effectively isolating interfaces and suppressing wear. At 5 A, excessive Joule heating causes cracks and film detachment, exacerbating thermal fatigue-adhesive wear. The lubricating film exhibits maximum stability when 0.5% CNTs+10% Graphite (mass fraction) synergize with a 3 A current. This study provides theoretical support for designing high-performance mechanical-electrical composites for wind power slip rings.
|
|
Received: 25 July 2025
Published: 06 January 2026
|
|
|
|
|
|
[1] KOVÁČIK J, BRUDNY A, KULASA J, et al. Friction and wear rate composition dependence of Cu-graphite composites prepared by spark plasma sintering[J]. Journal of Materials Research and Technology, 2025, 36: 5940-5951.
[2] KOVÁČIK J, EMMER Š, BIELEK J, et al. Effect of composition on friction coefficient of Cu-graphite composites[J]. Wear, 2008, 265(3/4): 417-421.
[3] DIXIT M, AGARWAL M, DWIVEDI V K, et al.Influence of Cu granules and Cu coated graphite particles on microstructure and properties of the Cu-graphite composite[J]. Materials Today Communications, 2025, 46: 112706.
[4] DOUTRIAUX T, FOUVRY S, LAROUSSE S, et al.How transfer film formation in bronze/silver-graphite sliding contact drives its electrical performance[J]. Wear, 2025, 570: 205976.
[5] YAN Y F, KOU S Q, YANG H Y, et al.Synergistic optimization of mechanical and tribological properties of TiC modified copper-graphite composites by direct current in-situ sintering[J]. Ceramics International, 2023, 49(16): 27069-27078.
[6] SINGH K, KHANNA V, SONU, et al. Paradigm of state-of-the-art CNT reinforced copper metal matrix composites: processing, characterizations, and applications[J]. Journal of Materials Research and Technology, 2023, 24: 8572-8605.
[7] LIEW K M, PAN Z Z, ZHANG L W.The recent progress of functionally graded CNT reinforced composites and structures[J]. Science China Physics, Mechanics & Astronomy, 2019, 63(3): 234601.
[8] SHU R, JIANG X S, SHAO Z Y, et al.Fabrication and mechanical properties of MWCNTs and graphene synergetically reinforced Cu-graphite matrix composites[J]. Powder Technology, 2019, 349: 59-69.
[9] ZHAO Q, GAN X P, ZHOU K C.Enhanced properties of carbon nanotube-graphite hybrid-reinforced Cu matrix composites via optimization of the preparation technology and interface structure[J]. Powder Technology, 2019, 355: 408-416.
[10] XU Y J, ZHOU T, LEI M, et al.Surface modification of CNTs to improve comprehensive properties of CNTs/Cu composites[J]. Composite Interfaces, 2023, 30(6): 645-657.
[11] YANG Y B, GUO X H, SONG K X, et al.Electrical wear performance of copper matrix composites reinforced with hybrid CNTs and TiB2 particles[J]. Industrial Lubrication and Tribology, 2022, 74(6): 609-618.
[12] WANG C Z, WU Z, LI F X, et al.Friction and wear properties of copper matrix composites with CNTs/Cu composite foams as reinforcing skeletons[J]. Tribology Letters, 2021, 69(4): 120.
[13] WANG C, XIAO J K, XIAO S X, et al.Effect of electrical current on the tribological property of Cu-graphite brush[J]. Tribology Letters, 2024, 72(1): 29.
[14] SUN K, DIAO D F.Current density effect on current-carrying friction of amorphous carbon film[J]. Carbon, 2020, 157: 113-119.
[15] ZHOU Y K, ZHU R, ZUO X, et al.Tribo-electrical behaviors of CNTs-MoS2/Cu composites under sliding electrical contact with brass[J]. Tribology International, 2023, 180: 108207.
[16] 张巍. SiC陶瓷自润滑的研究进展与展望[J]. 摩擦学学报(中英文), 2024, 44(12): 1764-1776.
ZHANG Wei.Progress and prospect of self-lubrication of SiC ceramics[J]. Tribology, 2024, 44(12): 1764-1776.
[17] 张巍, 张杰. 碳化硼陶瓷自润滑研究现状[J]. 中国表面工程, 2024, 37(3): 103-114.
ZHANG Wei, ZHANG Jie.State of the art on self-lubrication of boron carbide ceramics[J]. China Surface Engineering, 2024, 37(3): 103-114.
[18] 吴海红, 王能慧, 张礼松, 等. 对偶材料对铜-石墨复合材料载流摩擦磨损性能的影响[J]. 粉末冶金材料科学与工程, 2024, 29(5): 384-395.
WU Haihong, WANG Nenghui, ZHANG Lisong, et al.Effects of counterpart materials on the current-carrying friction and wear properties of copper-graphite composites[J]. Materials Science and Engineering of Powder Metallurgy, 2024, 29(5): 384-395.
[19] 方华婵, 孙振, 许永祥, 等. 树脂包覆石墨/铜复合材料的高温和载流摩擦磨损性能[J]. 粉末冶金材料科学与工程, 2023, 28(4): 315-328.
FANG Huachan, SUN Zhen, XU Yongxiang, et al.High temperature and current-carrying friction and wear properties of resin-coated graphite/copper composites[J]. Materials Science and Engineering of Powder Metallurgy, 2023, 28(4): 315-328.
[20] XU W, HU R, LI J S, et al.Effect of electrical current on tribological property of Cu matrix composite reinforced by carbon nanotubes[J]. Transactions of Nonferrous Metals Society of China, 2011, 21(10): 2237-2241. |
|
|
|
2025, Vol. 30 
