|
|
|
| Effects of annealing on microstructure and mechanical properties of powder metallurgy hot rolled CoCrFeNiC0.05 high-entropy alloy sheet |
| ZHANG Yangfan1, ZHOU Rui2, TAO Hui1, LI Huizhong1,3, LIANG Xiaopeng1,3 |
1. School of Materials Science and Engineering, Central South University, Changsha 410083, China;
2. Department of Materials Science and Engineering, City University of Hong Kong, Hong Kong 999077, China;
3. Key Laboratory of Nonferrous Metal Materials Science and Engineering, Ministry of Education, Central South University, Changsha 410083, China |
|
|
|
|
Abstract The pre-alloyed powder was prepared by gas atomization method with Cr, Co, Fe, Ni simple substance and Cr3C2 as raw materials. CoCrFeNiC0.05 high-entropy alloy was prepared by hot isostatic pressing, and the alloy was hot rolled and annealed. The effects of annealing on the microstructure and mechanical properties of powder metallurgy hot rolled CoCrFeNiC0.05 high-entropy alloy sheet were systematically studied by X-ray diffraction, optical microscope, scanning electron microscope, transmission electron microscope, electron backscatter diffraction, Vickers hardness, and tensile testing. The results show that the grains are equiaxed in hot isotactic pressed alloy but transform to elongated morphology after hot rolling. The hot rolled sheet exhibits a strong F-type texture, and twins and submicron Cr23C6 typed carbide are observed. After annealing treatment at 800 ℃, the alloy undergoes complete recrystallization. Hot rolling combining with moderate temperature annealing (500 ℃) is an effective approach to achieving good comprehensive mechanical properties for CoCrFeNiC0.05 high-entropy alloy, with yield strength of 961 MPa, tensile strength of 1 023 MPa, and elongation of 13.6%.
|
|
Received: 05 May 2023
Published: 22 November 2023
|
|
|
|
|
|
[1] YEH J W, CHEN S K, LIN S J, et al.Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes[J]. Advanced Engineering Materials, 2004, 6(5): 299-303.
[2] YE Y F, WANG Q, LU J, et al.High-entropy alloy: challenges and prospects[J]. Materials Today, 2016, 19(6): 349-362.
[3] ZHANG C, YU Q, TANG Y T, et al.Strong and ductile FeNiCoAl-based high-entropy alloys for cryogenic to elevated temperature multifunctional applications[J]. Acta Materialia, 2023, 242: 118449.
[4] GLUDOVATZ B, HOHENWARTER A, CATOOR D, et al.A fracture-resistant high-entropy alloy for cryogenic applications[J]. Science, 2014, 345(6201): 1153-1158.
[5] LIU D, YU Q, KABRA S, et al.Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys at 20 kelvin[J]. Science, 2022, 378(6623): 978-983.
[6] EL-ATWANI O, LI N, LI M, et al. Outstanding radiation resistance of tungsten-based high-entropy alloys[J]. Science Advances, 2019, 5(3): eaav2002.
[7] CHEN W, ZHOU R, LI W, et al.Effect of interstitial carbon and nitrogen on corrosion of FeCoCrNi multi-principal element alloys made by selective laser melting[J]. Journal of Materials Science & Technology, 2023, 148: 52-63.
[8] WU Z, BEI H, PHARR G M, et al.Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures[J]. Acta Materialia, 2014, 81: 428-441.
[9] ZHANG B, ZHANG Y, GUO S M.A thermodynamic study of corrosion behaviors for CoCrFeNi-based high-entropy alloys[J]. Journal of Materials Science, 2018, 53(20): 14729-14738.
[10] GALI A, GEORGE E P.Tensile properties of high- and medium-entropy alloys[J]. Intermetallics, 2013, 39: 74-78.
[11] WANG Z, BAKER I, CAI Z, et al.The effect of interstitial carbon on the mechanical properties and dislocation substructure evolution in Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys[J]. Acta Materialia, 2016, 120: 228-239.
[12] LI W, XIE D, LI D, et al.Mechanical behavior of high- entropy alloys[J]. Progress in Materials Science, 2021, 118: 100777.
[13] CHEN J, YAO Z, WANG X, et al.Effect of C content on microstructure and tensile properties of as-cast CoCrFeMnNi high entropy alloy[J]. Materials Chemistry and Physics, 2018, 210: 136-145.
[14] ELKATATNY S, GEPREEL M A H, HAMADA A, et al. Effect of Al content and cold rolling on the microstructure and mechanical properties of Al5Cr12Fe35Mn28Ni20 high- entropy alloy[J]. Materials Science and Engineering A, 2019, 759: 380-390.
[15] HE Y X, YANG H X, ZHAO C D, et al.Enhancing mechanical properties of Al0.25CoCrFeNi high-entropy alloy via cold rolling and subsequent annealing[J]. Journal of Alloys and Compounds, 2020, 830: 154645.
[16] LIU Z, XIONG Z P, CHEN K X, et al.Large-size high-strength and high-ductility AlCoCrFeNi2.1 eutectic high-entropy alloy produced by hot-rolling and subsequent aging[J]. Materials Letters, 2022, 315: 131933.
[17] LU P, ZHANG T W, ZHAO D, et al.Mechanical behaviors and texture evolution of CoCrFeNi high-entropy alloy under shear-tension deformation[J]. Journal of Alloys and Compounds, 2020, 815: 152479.
[18] SALEH A A, HAASE C, PERELOMA E V, et al.On the evolution and modelling of brass-type texture in cold-rolled twinning-induced plasticity steel[J]. Acta Materialia, 2014, 70: 259-271.
[19] BHATTACHARJEE P P, SATHIARAJ G D, ZAID M, et al.Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy[J]. Journal of Alloys and Compounds, 2014, 587: 544-552.
[20] BRACKE L, VERBEKEN K, KESTENS L, et al.Microstructure and texture evolution during cold rolling and annealing of a high Mn TWIP steel[J]. Acta Materialia, 2009, 57(5): 1512-1524.
[21] ZENG Z R, ZHU Y M, XU S W, et al.Texture evolution during static recrystallization of cold-rolled magnesium alloys[J]. Acta Materialia, 2016, 105: 479-494.
[22] THIRATHIPVIWAT P, ONUKI Y, UMEMURA K, et al.Microstructure, dislocation density and microhardness of 1% C-doped CoCrFeNi complex concentrated alloys during isochronal annealing[J]. Journal of Alloys and Compounds, 2023, 930: 167504. |
|
|
|
2023, Vol. 28 
