[1] ZHANG W Y, SHI F Y, WANG J W, et al.Preparation and properties of a porous ZrO2/SiZrBoC ceramic matrix composite with high temperature resistance and low thermal conductivity[J]. Journal of the European Ceramic Society, 2024, 44(4): 2329-2337.
[2] ZHAO Y, ZHANG W J, WANG M H, et al.Low-density ZnTiO3-ceramic hollow microsphere composite photocatalyst for degradation of azophloxine[J]. Journal of Alloys and Compounds, 2024, 995: 174846.
[3] ZHU T T, WU Z X, WANG Y D, et al.Sintering of silicomanganese slag-reinforced porous SiC ceramic membrane supports with high alkali corrosion resistance[J]. Ceramics International, 2024, 50(2): 3921-3929.
[4] DU J G, ZHANG H Z, GENG Y M, et al.A review on machining of carbon fiber reinforced ceramic matrix composites[J]. Ceramics International, 2019, 45(15): 18155-18166.
[5] DHANASEKAR S, GANESAN A T, RANI T L, et al.A comprehensive study of ceramic matrix composites for space applications[J]. Advances in Materials Science and Engineering, 2022, 2022: 6160591.
[6] GERINGER J W, KATOH Y, GONCZY S, et al.Codes and standards for ceramic composite core materials for high temperature reactor applications[J]. Nuclear Engineering and Design, 2023, 405: 112158.
[7] JIA C, XU Z, LUO D, et al.Flexible ceramic fibers: recent development in preparation and application[J]. Advanced Fiber Materials, 2022, 4(4): 573-603.
[8] MOR M, MEISER M, LANGHOF N, et al.Tribological behavior of carbon fiber reinforced ZrB2 based ultra high temperature ceramics[J]. Journal of the European Ceramic Society, 2023, 43(13): 5413-5424.
[9] MA Y Y, WANG J T, ZHAO G Z, et al.New insights into the damage assessment and energy dissipation weight mechanisms of ceramic/fiber laminated composites under ballistic impact[J]. Ceramics International, 2023, 49(13): 21966-21977.
[10] ZHANG Q Z, ZHOU W, PANG L, et al.Design and numerical studies of microwave absorption structure based on hybrid weave of fibers with different dielectric properties[J]. Composite Structures, 2023, 323: 117460.
[11] HU P L, SHAN Z D, ZANG Y, et al.High temperature thermal conductivity of fiber hybrid ceramic matrix composites with different modes[J]. Advanced Engineering Materials, 2024, 10(26): 2301552.
[12] LI L B, LIU Y F, WANG Y L.Estimate constituent properties of 3D needle-punched C/SiC composites from hysteresis loops[J]. International Journal of Fatigue, 2023, 170: 107543.
[13] PENG Y Q, LI Z W, LI A J, et al.Mechanical and tribological properties of C/C-SiC ceramic composites with different preforms[J]. Science and Engineering of Composite Materials, 2023, 30(1): 20220205.
[14] MEI H, YAN Y K, FENG L P, et al.First printing of continuous fibers into ceramics[J]. Journal of the American Ceramic Society, 2018, 102(6): 3244-3255.
[15] ZHAO Z, ZHOU G X, YANG Z H, et al.Direct ink writing of continuous SiO2 fiber reinforced wave-transparent ceramics[J]. Journal of Advanced Ceramics, 2020, 9(4): 403-412.
[16] CRAMER C L, YOON B, LANCE M J, et al.Additive manufacturing of C/C-SiC ceramic matrix composites by automated fiber placement of continuous fiber tow in polymer with pyrolysis and reactive silicon melt infiltration[J]. Journal of Composites Science, 2022, 6(12): 359.
[17] SUN J X, YU S X, WADE-ZHU J, et al.3D printing of layered ceramic/carbon fiber composite with improved toughness[J]. Additive Manufacturing, 2022, 50: 102543.
[18] ZHANG L, WANG W Q, GAO X, et al.Additive manufacturing of continuous carbon fiber reinforced high entropy ceramic matrix composites via paper laminating, direct slurry writing, and precursor infiltration and pyrolysis[J]. Ceramics International, 2023, 49(5): 7833-7841.
[19] LI S, ZHANG H T, LU Z L, et al.Fabrication of bamboo-inspired continuous carbon fiber-reinforced SiC composites via dual-material thermally assisted extrusion-based 3D printing[J]. Journal of Materials Science & Technology, 2024, 208: 92-103.
[20] GULCAN O, GUNAYDIN K, TAMER A.The state of the art of material jetting: a critical review[J]. Polymers, 2021, 13(16): 2829.
[21] LV X F, YE F, CHENG L F, et al.Binder jetting of ceramics: powders, binders, printing parameters, equipment, and post-treatment[J]. Ceramics International, 2019, 45(10): 12609-12624.
[22] DU W C, REN X R, PEI Z J, et al.Ceramic binder jetting additive manufacturing: a literature review on density[J]. Journal of Manufacturing Science and Engineering, 2020, 142(4): 040801.
[23] KUNCHALA P, KAPPAGANTULA K.3D printing high density ceramics using binder jetting with nanoparticle densifiers[J]. Materials & Design, 2018, 155: 443-450.
[24] FLORIO K, PUCCIO D, VIGANÒ G, et al.Process characterization and analysis of ceramic powder bed fusion[J]. The International Journal of Advanced Manufacturing Technology, 2021, 117(7/8): 2105-2116.
[25] REHMAN A U, NAVARRETE-SEGADO P, SALAMCI M U, et al.Understanding the consolidation mechanism of selective laser sintering/powder bed selective laser process of ceramics: hydroxyapatite case[J]. Rapid Prototyping Journal, 2024, 30(4): 677-695.
[26] LI S C, LIU D F, MI H B, et al.Numerical simulation on evolution process of molten pool and solidification characteristics of melt track in selective laser melting of ceramic powder[J]. Ceramics International, 2022, 48(13): 18302-18315.
[27] MOSTAFAEI A, ZHAO C, HE Y N, et al.Defects and anomalies in powder bed fusion metal additive manufacturing[J]. Current Opinion in Solid State and Materials Science, 2022, 26(2): 100974.
[28] MAURYA H S, KOSIBA K, JUHANI K, et al.Effect of powder bed preheating on the crack formation and microstructure in ceramic matrix composites fabricated by laser powder-bed fusion process[J]. Additive Manufacturing, 2022, 58: 103013.
[29] WANG Y R, SU R Y, CHEN J Y, et al.3D printed bioinspired flexible absorber: toward high-performance electromagnetic absorption at 75-110 GHz[J]. ACS Applied Materials & Interfaces, 2023, 15(46): 53996-54005.
[30] CHEN J Y, SU R Y, ZHAI X F, et al.Improving the accuracy of stereolithography 3D printed Al2O3 microcomponents by adding photoabsorber: fundamentals and experiments[J]. Journal of Materials Research and Technology, 2023, 27: 757-766.
[31] SU R Y, CHEN J Y, ZHANG X F, et al.Accuracy controlling and mechanical behaviors of precursor-derived ceramic SiOC microlattices by projection micro stereolithography (PμSL) 3D printing[J]. Journal of Advanced Ceramics, 2023, 12(11): 2134-2147.
[32] WU X Q, TENG J C, JI X X, et al.Research progress of the defects and innovations of ceramic vat photopolymerization[J]. Additive Manufacturing, 2023, 65: 103441.
[33] ZHOU Q, SU X N, WU J Q, et al.Additive manufacturing of bioceramic implants for restoration bone engineering: technologies, advances, and future perspectives[J]. ACS Biomaterials Science & Engineering, 2023, 9(3): 1164-1189.
[34] ZHANG X Q, ZHANG K Q, ZHANG L, et al.Additive manufacturing of cellular ceramic structures: from structure to structure-function integration[J]. Materials & Design, 2022, 215: 110470.
[35] ASAD H, IHSANULLAH K.A review of laminated object manufacturing (LOM) aspects and various processes used in it[J]. International Journal of Advanced Engineering Research and Science, 2023, 10(1): 46-54.
[36] ISHFAQ K, ABAS Z, KUMAR M S, et al.Review of recent trends in ultrasonic additive manufacturing: current challenges and future prospects[J]. Rapid Prototyping Journal, 2023, 29(6): 1195-1211.
[37] CHENG L F, SUN M Y, YE F, et al.Structure design, fabrication, properties of laminated ceramics: a review[J]. International Journal of Lightweight Materials and Manufacture, 2018, 1(3): 126-141.
[38] ZHENG Q Y, XIE B, XU Z L, et al.A systematic printability study of direct ink writing towards high-resolution rapid manufacturing[J]. International Journal of Extreme Manufacturing, 2023, 5(3): 035002.
[39] GONZALEZ-GUTIERREZ J, CANO S, SCHUSCHNIGG S, et al.Additive manufacturing of metallic and ceramic components by the material extrusion of highly-filled polymers: a review and future perspectives[J]. Materials, 2018, 11(5): 840.
[40] ROMANCZUK-RUSZUK E, SZTORCH B, PAKUŁA D, et al. 3D printing ceramics: materials for direct extrusion process[J]. Ceramics, 2023, 6(1): 364-385.
[41] PUZATOVA A, SHAKOR P, LAGHI V, et al.Large-scale 3D printing for construction application by means of robotic arm and gantry 3D printer: a review[J]. Buildings, 2022, 12(11): 2023.
[42] YAN Y K, MEI H, ZHANG M G, et al.Key role of interphase in continuous fiber 3D printed ceramic matrix composites[J]. Composites Part A: Applied Science and Manufacturing, 2022, 162: 107127.
[43] CHENG Y H, ZHANG Y X, ZHANG F, et al.Using flexible hydrothermal carbon-coated continuous carbon fiber to fabricate Cf/ZrB2-SiC composites by fused deposition modeling and precursor infiltration pyrolysis[J]. Journal of the European Ceramic Society, 2024, 44(2): 721-728.
[44] CHEN R, BRATTEN A, RITTENHOUSE J, et al.Additive manufacturing of continuous carbon fiber-reinforced SiC ceramic composite with multiple fiber bundles by an extrusion-based technique[J]. Ceramics International, 2023, 49(6): 9839-9847.
[45] WANG W Q, GAO X, LI Z C, et al.Fiber-laying-assisted material extrusion additive manufacturing of continuous carbon fiber reinforced SiC ceramic matrix composites[J]. Materials Science and Engineering A, 2024, 890: 145944.
[46] AKHOUNDI B, BEHRAVESH A H, SAED A B.An innovative design approach in three-dimensional printing of continuous fiber-reinforced thermoplastic composites via fused deposition modeling process: in-melt simultaneous impregnation[J]. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2019, 234(1/2): 243-259.
[47] MORITZER E, ELSNER C L, SCHUMACHER C.Investigation of metal‐polymer composites manufactured by fused deposition modeling with regard to process parameters[J]. Polymer Composites, 2021, 42(11): 6065-6079.
[48] RAJAN K, SAMYKANO M, KADIRGAMA K, et al.Fused deposition modeling: process, materials, parameters, properties, and applications[J]. The International Journal of Advanced Manufacturing Technology, 2022, 120(3/4): 1531-1570.
[49] DEY A, YODO N.A systematic survey of FDM process parameter optimization and their influence on part characteristics[J]. Journal of Manufacturing and Materials Processing, 2019, 3(3): 64.
[50] MARTINI M, SCACCIA M, MARCHELLO G, et al.An outline of fused deposition modeling: system models and control strategies[J]. Applied Sciences, 2022, 12(11): 5400.
[51] LI S, ZHANG H T, HAN Y, et al.Thermally assisted extrusion-based 3D printing of continuous carbon fiber-reinforced SiC composites[J]. Composites Part A: Applied Science and Manufacturing, 2023, 172: 107593.
[52] LIU J, FENG K L, SU Z, et al. Dimensional deviations and distortion mechanism of polymer spur gear fabricated by fused deposition modeling[J]. Journal of Materials Engineering and Performance, [2024-08-03]. https://link.springer.com/article/10.1007/s11665-024-09321-w.
[53] WANG T, LI N Y, LINK G D, et al.Load-dependent path planning method for 3D printing of continuous fiber reinforced plastics[J]. Composites Part A: Applied Science and Manufacturing, 2021, 140: 106181.
[54] HUANG Y M, FANG G X, ZHANG T Y, et al.Turning-angle optimized printing path of continuous carbon fiber for cellular structures[J]. Additive Manufacturing, 2023, 68: 103501.
[55] DING W, LI H Y, LIU H L, et al.Thermal insulation and antioxidation of vertical graphene oxide‐grafted carbon nanofiber aerogels with ceramic coating[J]. Journal of the American Ceramic Society, 2022, 106(4): 2501-2514.
[56] KUMAR N M S, DHRUTHI N U D, SADASHIVA M, et al. Coatings on reinforcements in aluminum metal matrix composites[J]. International Journal of Metalcasting, 2022, 17(2): 1049-1064.
[57] LIU Y X, CHENG Y H, MA D H, et al.Continuous carbon fiber reinforced ZrB2-SiC composites fabricated by direct ink writing combined with low-temperature hot-pressing[J]. Journal of the European Ceramic Society, 2022, 42(9): 3699-3707.
[58] FANG C, HU P, DONG S, et al.Influence of hydrothermal carbon coating on the properties of CF/ZrB2/SiBCN prepared by slurry injection[J]. Journal of the European Ceramic Society, 2021, 41(1): 84-91.
[59] RODRÍGUEZ-ROJAS F, ZAMORA V, GUIBERTEAU F, et al. Effect of the degree of densification on the unlubricated sliding-wear behaviour of monolithic B4C ceramics[J]. Tribology International, 2023, 186: 108656.
[60] GE M M, XIE D Q, YANG Y W, et al.Sintering densification mechanism and mechanical properties of the 3D-printed high-melting-point-difference magnesium oxide/calcium phosphate composite bio-ceramic scaffold[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2023, 144: 105978.
[61] TANG S Y, YANG Y R, FAN Z T, et al.A novel composite binder design for direct ink writing alumina-based ceramics with enhanced strength at low sintering temperature[J]. Ceramics International, 2022, 48(6): 7963-7974.
[62] M’BARKI A, BOCQUET L, STEVENSON A. Linking rheology and printability for dense and strong ceramics by direct ink writing[J]. Scientific Reports, 2017, 7(1): 6017.
[63] CHAN S S L, SESSO M L, FRANKS G V. Direct ink writing of hierarchical porous alumina‐stabilized emulsions: rheology and printability[J]. Journal of the American Ceramic Society, 2020, 103(10): 5554-5566.
[64] CHEN R Y, BRATTEN A, RITTENHOUSE J, et al.Additive manufacturing of high mechanical strength continuous Cf/SiC composites using a 3D extrusion technique and polycarbosilane‐coated carbon fibers[J]. Journal of the American Ceramic Society, 2023, 106(7): 4028-4037.
[65] ZHU Z J, LIU R T, YAN J, et al.Effects of a polycarboxylate superplasticiser on the rheological properties of a portland-sulphoaluminate cement composite slurry[J]. Materials Letters, 2022, 317: 132147.
[66] SHEN M H, FU R L, LIU H B, et al.Photosensitive Si3N4 slurry with combined benefits of low viscosity and large cured depth for digital light processing 3D printing[J]. Journal of the European Ceramic Society, 2023, 43(3): 881-888.
[67] VATANDAS B B, USUN A, GUMRUK R, et al.The relationship between fiber bundle size and mechanical performance of additively manufactured continuous carbon fiber reinforced thermoplastic composites[J]. 3D Pringting and Additive Manufacturing, 2023, 10(6): 1190-1203.
[68] LIU K, QIU L, ZHANG Y Z, et al.Additive manufacturing of continuous carbon fiber-reinforced silicon carbide ceramic composites[J]. International Journal of Applied Ceramic Technology, 2023, 20(6): 3455-3469.
[69] HUANG L F, CHEN R Y, LI S S, et al.Microstructure and mechanical properties of continuous carbon fiber-reinforced SiC ceramic composite fabricated by direct ink writing[J]. Ceramics International, 2024, 50: 25679-25688.
[70] ZHENG W, WU J M, CHEN S, et al.Improved mechanical properties of SiC fiber reinforced silica-based ceramic cores fabricated by stereolithography[J]. Journal of Materials Science & Technology, 2022, 116: 161-168.
[71] TOFANGCHI A, HAN P, IZQUIERDO J, et al.Effect of ultrasonic vibration on interlayer adhesion in fused filament fabrication 3D printed ABS[J]. Polymers, 2019, 11(2): 315.
[72] KUNCIUS T, RIMASAUSKAS M, RIMASAUSKIENE R.Interlayer adhesion analysis of 3D-printed continuous carbon fibre-reinforced composites[J]. Polymers, 2021, 13(10): 1653.
[73] LI Z C, WANG W Q, GAO X, et al.Continuous carbon fiber reinforced SiC ceramic matrix composites by vertical fiber laying combined with material extrusion 3D printing[J]. Advanced Engineering Materials, 2024, 26(12): 2400218.
[74] WANG W Q, GAO X, LI Z C, et al.Effects of ceramic layer height on the mechanical properties of Cf/SiC ceramic matrix composites fabricated by fiber-laying-assisted material extrusion 3D printing[J]. Composites Communications, 2024, 48: 101926.
[75] ZHANG X Q, MENG Q Y, ZHANG K Q, et al.3D-printed bioinspired Al2O3/polyurea dual-phase architecture with high robustness, energy absorption, and cyclic life[J]. Chemical Engineering Journal, 2023, 463: 142378.
[76] LI S W, WANG G, ZHANG K Q, et al.Mechanical properties of Al2O3 and Al2O3/Al interpenetrated functional gradient structures by 3D printing and melt infiltration[J]. Journal of Alloys and Compounds, 2023, 950: 169948.
[77] LU J J, ZHANG X Q, LI S W, et al.Quasi-static compressive and cyclic dynamic impact performances of vat photopolymerization 3D printed Al2O3 triply periodic minimal surface scaffolds and Al2O3/Al hybrid structures: effects of cell size[J]. Journal of Alloys and Compounds, 2023, 969: 172445.
[78] XU Z K, SUN X H, XIONG K Z, et al.A review of the research progress on the interface between oxide fiber and oxide ceramic matrix[J]. Ceramics International, 2021, 47(5): 5896-5908.
[79] LUO X Y, ZHENG H, LAI W D, et al.Defect engineering of carbons for energy conversion and storage applications[J]. Energy & Environmental Materials, 2023, 6(3): e12402.
[80] CHEN P C, MIAO W C, AHMED T, et al.Defect inspection techniques in SiC[J]. Nanoscale Research Letters, 2022, 17(1): 30.
[81] AI S G, SONG W L, CHEN Y F.Stress field and damage evolution in C/SiC woven composites: image-based finite element analysis and in situ X-ray computed tomography tests[J]. Journal of the European Ceramic Society, 2021, 41(4): 2323-2334.
[82] SAÂDAOUI M, KHALDOUN F, ADRIEN J, et al. X-ray tomography of additive-manufactured zirconia: processing defects-strength relations[J]. Journal of the European Ceramic Society, 2020, 40(8): 3200-3207.
[83] 翟小菲, 陈婧祎, 张学勤, 等. 陶瓷型芯3D打印研究进展与挑战[J]. 陶瓷学报, 2023, 44(5): 831-848.
ZHAI Xiaofei, CHEN Jingyi, ZHANG Xueqin, et al.Recent progresses and challenges of 3D printing of ceramic cores[J]. Journal of Ceramics, 2023, 44(5): 831-848.
[84] ZHANG K Q, MENG Q Y, QU Z L, et al.A review of defects in vat photopolymerization additive-manufactured ceramics: characterization, control, and challenges[J]. Journal of the European Ceramic Society, 2024, 44(3): 1361-1384.
[85] ZHANG K Q, MENG Q Y, CAI N J, et al.Effects of solid loading on stereolithographic additive manufactured ZrO2 ceramic: a quantitative defect study by X-ray computed tomography[J]. Ceramics International, 2021, 47(17): 24353-24359.
[86] HOSSAIN S S, LU K.Recent progress of alumina ceramics by direct ink writing: ink design, printing and post-processing[J]. Ceramics International, 2023, 49(7): 10199-10212.
[87] CHAVEZ L A, IBAVE P, WILBURN B, et al.The influence of printing parameters, post-processing, and testing conditions on the properties of binder jetting additive manufactured functional ceramics[J]. Ceramics, 2020, 3(1): 65-77.
[88] BAI X J, DING G J, ZHANG K Q, et al.Stereolithography additive manufacturing and sintering approaches of SiC ceramics[J]. Open Ceramics, 2021, 5: 100046.
[89] SUN G D, ZHANG C, ZHANG Q, et al.Microstructure and mechanical properties of SiCf/SiC composite prepared by chemical vapor infiltration[J]. Ceramics International, 2022, 48(24): 36983-36991.
[90] LYU Y, DU B H, CHEN G Q, et al.Microstructural regulation, oxidation resistance, and mechanical properties of Cf/SiC/SiHfBOC composites prepared by chemical vapor infiltration with precursor infiltration pyrolysis[J]. Journal of Advanced Ceramics, 2021, 11(1): 120-135.
[91] TANG J, LIU M, WEI Y Q, et al.An efficient and low-cost liquid silicon infiltration method to prepare SiC-coated carbon short fiber for fiber protection of Cf/SiC ceramic matrix composites[J]. Ceramics International, 2021, 47(9): 13235-13241.
[92] YANG Z S, JIN L, YAN Y L, et al.Filament breakage monitoring in fused deposition modeling using acoustic emission technique[J]. Sensors, 2018, 18(3): 749.
[93] TAMIR T S, XIONG G, FANG Q H, et al.Machine-learning-based monitoring and optimization of processing parameters in 3D printing[J]. International Journal of Computer Integrated Manufacturing, 2022, 36(9): 1362-1378.
[94] HUNDE B R, WOLDEYOHANNES A D.Future prospects of computer-aided design (CAD): a review from the perspective of artificial intelligence (AI), extended reality, and 3D printing[J]. Results in Engineering, 2022, 14: 100478.
[95] LU L, HOU J, YUAN S Q, et al.Deep learning-assisted real-time defect detection and closed-loop adjustment for additive manufacturing of continuous fiber-reinforced polymer composites[J]. Robotics and Computer-Integrated Manufacturing, 2023, 79: 102431.
[96] CHOU Y L, MOREIRA C, BRUZA P, et al.Counterfactuals and causability in explainable artificial intelligence: theory, algorithms, and applications[J]. Information Fusion, 2022, 81: 59-83.
[97] YAMAMOTO K, LUCES J V S, SHIRASU K, et al. A novel single-stroke path planning algorithm for 3D printers using continuous carbon fiber reinforced thermoplastics[J]. Additive Manufacturing, 2022, 55: 102816.
[98] TAO F, XIAO B, QI Q L, et al.Digital twin modeling[J]. Journal of Manufacturing Systems, 2022, 64: 372-389.
[99] LIU X F, HE J F, LI Y G, et al.Foam-gelcasting preparation of porous SiC ceramic for high-temperature thermal insulation and infrared stealth[J]. Rare Metals, 2023, 42(11): 3829-3838.
[100] SU R Y, CHEN J Y, ZHANG X Q, et al.3D-printed micro/nano-scaled mechanical metamaterials: fundamentals, technologies, progress, applications, and challenges[J]. Small, 2023, 19(29): e2206391.
[101] WANG W Q, LI Z C, GAO X, et al.Material extrusion 3D printing of large-scale SiC honeycomb metastructure for ultra-broadband and high temperature electromagnetic wave absorption[J]. Additive Manufacturing, 2024, 85: 104158.
[102] SUN M Y, YU Y F, AN K, et al.Active frequency selective rasorber based on fiber-reinforced SiO2 ceramic matrix composite[J]. IEEE Transactions on Electromagnetic Compatibility, 2022, 64(5): 1593-1601.
[103] WANG C S, WU S Q, LI Z Q, et al.3D printed porous biomass-derived SiCnw/SiC composite for structure-function integrated electromagnetic absorption[J]. Virtual and Physical Prototyping, 2022, 17(3): 718-733.
[104] FENG P, ZHAO R Y, TANG W M, et al.Structural and functional adaptive artificial bone: materials, fabrications, and properties[J]. Advanced Functional Materials, 2023, 33(23): 2214726.
[105] KHALID M Y, ARIF Z U, NOROOZI R, et al.4D printing of shape memory polymer composites: a review on fabrication techniques, applications, and future perspectives[J]. Journal of Manufacturing Processes, 2022, 81: 759-797.
[106] HE R J, ZHOU N P, ZHANG K Q, et al.Progress and challenges towards additive manufacturing of SiC ceramic[J]. Journal of Advanced Ceramics, 2021, 10(4): 637-674.
[107] LIU G, LU X Y, ZHANG X F, et al.3D/4D additive-subtractive manufacturing of heterogeneous ceramics[J]. Journal of Materials Science & Technology, 2024, 201: 210-221.
[108] LIU G, ZHANG X F, LU X Y, et al.4D additive-subtractive manufacturing of shape memory ceramics[J]. Advanced Materials, 2023, 35(39): 2302108.
[109] WANG R, YUAN C, CHENG J X, et al.Direct 4D printing of ceramics driven by hydrogel dehydration[J]. Natrue Communications, 2024, 15(1): 758.
[110] PALADUGU S R M, SREEKANTH P S R, SAHU S K, et al. A comprehensive review of self-healing polymer, metal, and ceramic matrix composites and their modeling aspects for aerospace applications[J]. Materials, 2022, 15(23): 8521.
[111] HUANG J G, GUO L J, ZHONG L.Synergistic healing mechanism of self-healing ceramics coating[J]. Ceramics International, 2022, 48(5): 6520-6527.
[112] SEKINE N, NAKAO W.Advanced self-healing ceramics with controlled degradation and repair by chemical reaction[J]. Materials, 2023, 16(19): 6368.
[113] BABAFEMI A J, KOLAWOLE J T, MIAH M J, et al.A concise review on interlayer bond strength in 3D concrete printing[J]. Sustainability, 2021, 13(13): 7137.
[114] CHENG F, HU Y S, YUAN B Y, et al.Transverse and longitudinal flexural properties of unidirectional carbon fiber composites interleaved with hierarchical aramid pulp micro/nano-fibers[J]. Composites Part B: Engineering, 2020, 188: 107897.
[115] ZHANG P F, QIU Y, YE C, et al.Anisotropically conductive phase change composites enabled by aligned continuous carbon fibers for full-spectrum solar thermal energy harvesting[J]. Chemical Engineering Journal, 2023, 461: 141940.
[116] GOH G D, DIKSHIT V, AN J, et al.Process-structure-property of additively manufactured continuous carbon fiber reinforced thermoplastic: an investigation of mode I interlaminar fracture toughness[J]. Mechanics of Advanced Materials and Structures, 2020, 29(10): 1418-1430.