电解液循环方式对电解能耗及铜粉性能的影响

Abstract
Figure/Table
References
Related Citation (0)

Download: PDF (428 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract The electrolytic copper powder was prepared by using a new type of electrolytic cell with parallel feed device under the condition of total flow rate of 18 L/min. The effects of electrolyte feeding mode on cell voltage, current efficiency, energy consumption and copper powder properties were studied. The energy saving and consumption reduction of copper powder electrolysis process were also explored. The results show that the energy consumption is 3.01×106 kJ/t, the current efficiency is 94.42%, the particle size of copper powder is 3.47 μm, and the particle size distribution is concentrated by wing traditional injection method. The cell voltage and energy consumption of electrolysis process can be effectively reduced by using the traditional mode of parallel and bilateral flow. With the increase of the flow rate of bilateral parallel flow, the current efficiency increases and the energy consumption decreases, but the particle size of copper powder increases. When the flow rate of the spray nozzle is 6 L/min, the electrolysis energy consumption of 2.55×106 kJ/t is low, the average particle size of copper powder is 4.65 μm, the particle size of more than 95% copper powder is less than 7.2 μm, and the copper powder has obvious dendritic structure. There is no obvious difference in the properties of copper powder obtained from traditional electrolysis. When the nozzle flow rate further increases to 9 L/min, the energy consumption of electrolysis decreases to 2.17×106 kJ/t, and the current efficiency increases to 96.95%, but the particle size of copper powder increases to 45.76 μm, and the particle size distribution is obviously graded.

Key words： electrolytic copper powder new electrolytic cell current efficiency energy consumption particle size of copper powder size

Received: 25 May 2018 Published: 12 July 2019

ZTFLH:

TF811

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	XIANG Xiaoyan
	XIA Wentang
	YANG Wenqiang
	YIN Jianguo

Cite this article:

XIANG Xiaoyan,XIA Wentang,YANG Wenqiang, et al. Effects of electrolyte circulation form on energy consumption and properties of electrolytic copper powder[J]. Materials Science and Engineering of Powder Metallurgy, 2019, 24(1): 21-26.

URL:

http://pmbjb.csu.edu.cn/EN/ OR http://pmbjb.csu.edu.cn/EN/Y2019/V24/I1/21

[1] AGRAWAL A, KUMARI S, BAGCHI D, et al.Hydrogen reduction of copper bleed solution from an Indian copper smelter for producing high purity copper powders[J]. Hydrometallurgy, 2006, 84(3): 218-224.
[2] EVERHART J L.Copper and Copper Alloy Powder Metallurgy: Properties and Applications[M]. New York: Metal Powder Industries Federation/Copper Development Association Inc, 1975: 1-4.
[3] 罗燕, 周剑秋, 郭钊, 等. 撞击流反应器制备纳米铜粉过程的流场多尺度分析[J]. 中国有色金属学报, 2016, 26(3): 630-635.
LUO Yang, ZHOU Jianqiu, GUO Zhao, et al.Flow field multi- scale analysis of impinging stream reactor for preparing nano copper powder process[J]. Transactions of Nonferrous Metals Society of China, 2016, 26(3): 630-635.
[4] ORHAN G, HAPC G.Effect of electrolysis parameters on the morphologies of copper powder obtained in a rotating cylinder electrode cell[J]. Powder Technology, 2010, 201(1): 57-63.
[5] ORHAN G, GEZGIN G G.Effect of electrolysis parameters on the morphologies of copper powder obtained at high current densities[J]. Journal of the Serbian Chemical Society, 2012, 77(5): 651-665.
[6] 黄培云. 粉末冶金原理[M]. 第2版. 北京: 冶金工业出版社, 1997: 80-92.
HUANG Peiyun.Principle of Power Metallurgy[M]. 2nd ed. Beijing: Metallurgical Industry Press, 1997: 80-92.
[7] VISWANATH S G, GEORGE S.Electrowinning of copper powder from copper sulphate solution in presence of glycerol and sulphuric acid[J]. Indian Journal of Chemical Technology, 2011, 18(1): 37-44.
[8] NIKOLIĆ N D, PAVLOVIĆ L J, PAVLOVIĆ M G, et al.Morphologies of electrochemically formed copper powder particles and their dependence on the quantity of evolved hydrogen[J]. Powder Technology, 2008, 185(3): 195-201.
[9] 徐建生, 钟康年, 常跃, 等. 纳米润滑剂的制备及特性研究[J]. 润滑与密封, 2002(4): 14-16.
XU Jiansheng, ZHONG Kangnian, CHANG Yue, et al.Preparaition and characteristics of nanolubricant[J]. Lubrication Engineering, 2002(4): 14-16.
[10] WICHIANRAK N, THAVARUNGKUL N. Copper powder extrusion: A smart processing for energy and environment conservation[J]. Advanced Materials Research, 2008, 55/57: 361-364.
[11] WANG M Y, ZHI W, GUO Z C.Preparation of electrolytic copper powders with high current efficiency enhanced by super gravity field and its mechanism[J]. Transactions of Nonferrous Metals Society of China, 2010, 20(6): 1154-1160.
[12] CIFUENTES L, CASTRO J M, CRISOSTOMO G, et al.Modelling a copper electrowinning cell based on reactive electrodialysis[J]. Applied Mathematical Modelling, 2007, 31(7): 1308-1320.
[13] SOLIMAN H, EL-MONEIM A A. Electrowinning of copper using rotating cylinder electrode utilizing lead anode[J]. Engineering, 2011, 34039(3): 340-358.
[14] SANDOVAL S P, DOLINAR W J. Electrolyte circulation manifold for copper electrowinning cells which use the ferrous/ferric anode reaction[P]. U.S. Patent: 5, 492, 608, 1996-02-20.
[15] FILZWIESER A, FILZWIESER I, KONETSCHNIK S.New technology for electrorefining of copper[J]. JOM, 2012, 64(11): 1290-1295.
[16] POPOV K I, KRSTIĆ S B, OBRADOVIĆ M Č, et al.The effect of the particle shape and structure on the flowability of electrolytic copper powder. III. A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current[J]. Journal of the Serbian Chemical Society, 2004, 69(1): 43-51.
[17] POPOV K I, KRSTIĆ S B, PAVLOVIĆ M G.The critical apparent density for the free flow of copper powder[J]. Journal of the Serbian Chemical Society, 2003, 68(6): 511-513.