Co8W6Mo5Cr4V3粉末高速钢的热变形行为

doi:10.19976/j.cnki.43-1448/TF.2023064

Abstract
Figure/Table
References
Related Citation (3)

Download: PDF (1039 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract Co8W6Mo5Cr4V3 powder was prepared by melting, electroslag remelting, and gas atomization method, then Co8W6Mo5Cr4V3 powder high speed steel was prepared by hot isostatic pressing. Its thermal deformation behavior was studied through hot compression experiments that were conducted on the powder high speed steel under different deformation conditions. Based on the obtained stress-strain curves, a thermal deformation constitutive equation was established and a hot processing map was drawn. The results show that the flow stress of Co8W6Mo5Cr4V3 powder high speed steel decreases with the increase of deformation temperature or the decrease of strain rate. The correlation coefficient between the predicted flow stress through the constitutive equation and the experimental flow stress is 0.995, which can be used to predict the stress of powder high speed steel under different deformation conditions. According to the hot processing map, the optimal deformation temperature and strain rate of powder high speed steel are 1 100-1 150 ℃ and 0.1-1.0 s^-1, respectively.

Key words： Co8W6Mo5Cr4V3 powder high speed steel thermal deformation constitutive equation hot processing map

Received: 16 July 2023 Published: 26 March 2024

ZTFLH:	TG376.3
	TF124

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YANG Lilin
	CHEN Xuemin
	CHEN Shuo
	ZHAO Liping

Cite this article:

YANG Lilin,CHEN Xuemin,CHEN Shuo, et al. Hot deformation behavior of Co8W6Mo5Cr4V3 powder high speed steel[J]. Materials Science and Engineering of Powder Metallurgy, 2024, 29(1): 11-19.

URL:

http://pmbjb.csu.edu.cn/EN/10.19976/j.cnki.43-1448/TF.2023064 OR http://pmbjb.csu.edu.cn/EN/Y2024/V29/I1/11

[1] 秦乾, 杨芳, 陈存广, 等. 粉末高速钢的制备技术及发展方向[J]. 粉末冶金工业, 2022, 32(4): 67-75.
QIN Qian, YANG Fang, CHEN Cunguang, et al.Preparation technology and development direction of powder high-speed steel[J]. Powder Metallurgy Industry, 2022, 32(4): 67-75.
[2] 孙海霞. 粉末高速钢的制备及组织性能的研究[D].北京: 北京科技大学, 2021.
SUN Haixia.Study on the preparation, microstructure and performance of powder metallurgy high speed steel[D]. Beijing: University of Science and Technology Beijing, 2021.
[3] 赵文涛. M2高速钢中碳化物的演变规律研究[D]. 镇江: 江苏大学, 2021.
ZHAO Wentao.Study on evolution rule of carbides in high speed steel M2[D]. Zhenjiang: Jiangsu University, 2021.
[4] 宋繁策, 李鉴霖, 韩金科, 等. AlFeCoNiMo_0.2高熵合金热变形行为及热加工图[J]. 精密成形工程, 2021, 13(6): 91-97.
SONG Fance, LI Jianlin, HAN Jinke, et al.Hot deformation behavior and processing map of AlFeCoNiMo_0.2 high-entropy alloy[J]. Journal of Netshape Forming Engineering, 2021, 13(6): 91-97.
[5] 林莺莺, 东赟鹏, 于秋颖, 等. 铸态GH4175合金高温变形行为及热加工图研究[J]. 精密成形工程, 2022, 14(1): 133-140.
LIN Yingying, DONG Yunpeng, YU Qiuying, et al.High temperature deformation behavior and hot processing map of as-cast GH4175 alloy[J]. Journal of Netshape Forming Engineering, 2022, 14(1): 133-140.
[6] 王欣, 葛学元, 王淼辉, 等. S390粉末高速钢高温变形流动应力行为与预测[J]. 锻压技术, 2021, 46(1): 154-163.
WANG Xin, GE Xueyuan, WANG Miaohui, et al.Flow stress behavior and prediction of S390 powder metallurgy high speed steel at high temperature deformation[J]. Forging and Stamping Technology, 2021, 46(1): 154-163.
[7] 陈楠, 龙学湖, 滕浩, 等. Mo₂C增强M2高速钢球磨粉末的致密化及力学性能[J]. 粉末冶金材料科学与工程, 2022, 27(2): 161-170.
CHEN Nan, LONG Xuehu, TENG Hao, et al.Densification and mechanical properties of ball milled M2 high speed steel powder reinforced with Mo₂C[J]. Materials Science and Engineering of Powder Metallurgy, 2022, 27(2): 161-170.
[8] 王坚, 周芸, 马党参, 等. M35高速钢的热变形行为研究[J]. 塑性工程学报, 2016, 23(6): 143-150.
WANG Jian, ZHOU Yun, MA Dangshen, et al.Hot deformation behaviors of M35 high speed steel[J]. Journal of Plasticity Engineering, 2016, 23(6): 143-150.
[9] 刘延辉, 姚泽坤, 宁永权, 等. 粉末冶金高速钢的热变形行为[J]. 材料热处理学报, 2014, 35(4): 62-66.
LIU Yanhui, YAO Zekun, NING Yongquan, et al.Hot deformation behavior of powder metallurgy high speed steel[J]. Transactions of Materials and Heat Treatment, 2014, 35(4): 62-66.
[10] 吴明慧. 电子束熔炼M35高速钢的热变形特征的研究[J]. 钢铁钒钛, 2021, 42(4): 182-190.
WU Minghui.Study on the hot deformation characteristics of M35 high speed steel by electron beam smelting[J]. Iron Steel Vanadium Titanium, 2021, 42(4): 182-190.
[11] 王宝, 杨艳, 彭晓东, 等. 挤压态Mg-9Li-3Al-1.6Y合金的热变形行为[J]. 兵器材料科学与工程, 2017, 40(4): 64-69.
WANG Bao, YANG Yan, PENG Xiaodong, et al.Deformation behavior of extruded Mg-9Li-3Al-1.6Y alloy at elevated temperature[J]. Ordnance Material Science and Engineering, 2017, 40(4): 64-69.
[12] SELLARS C M, MCTEGART W J.On the mechanism of hot deformation[J]. Acta Metallurgica, 1966, 14(9): 1136-1138.
[13] 王春霞, 于福晓, 赵骧, 等. 半连续铸造Al-15Si合金热压缩变形流变应力行为[J]. 东北大学学报(自然科学版), 2012, 33(6): 827-831.
WANG Chunxia, YU Fuxiao, ZHAO Xiang, et al.Flow stress feature of DC cast Al-15Si alloy under hot compression deformation[J]. Journal of Northeastern University (Natural Science), 2012, 33(6): 827-831.
[14] PRASAD Y V, GEGEL H L, DORAIVELU S M, et al.Modeling of dynamic material behavior in hot deformation: forging of Ti-6242[J]. Metallurgical Transactions A, 1984, 15(10): 1883-1892.
[15] 林武, 李红英, 曾翠婷, 等. 一种低碳微合金管线钢的热变形行为[J]. 中南大学学报(自然科学版), 2010, 41(3): 940-947.
LIN Wu, LI Hongying, ZENG Cuiting, et al.Hot deformation behavior for a kind of low carbon micro-alloy pipeline steel[J]. Journal of Central South University (Science and Technology), 2010, 41(3): 940-947.
[16] 马超. 喷射成形M42高速钢热加工工艺研究[D]. 上海: 上海交通大学, 2012.
MA Chao.Researching about hot working process of the spray formed M42 steel[D]. Shanghai: Shanghai Jiaotong University, 2012.