[1] 孙东哲, 杨青青, 熊惟皓, 等. Ti(C,N)基金属陶瓷的组织结构与合金化[J]. 材料导报, 2013, 27(10): 125-129.
SUN Dongzhe, YANG Qingqing, XIONG Weihao, et al.Microstructure and alloying of TiCN-based cermets[J]. Materials Reports, 2013, 27(10): 125-129.
[2] PENG Y, MIAO H Z, PENG Z J.Development of TiCN- based cermets: mechanical properties and wear mechanism[J]. International Journal of Refractory Metals and Hard Materials, 2013, 39: 78-89.
[3] LIU N, CHAO S, YANG H D.Cutting performances, mechanical property and microstructure of ultra-fine grade Ti(C,N)-based cermets[J]. International Journal of Refractory Metals and Hard Materials, 2006, 24(6): 445-452.
[4] 文晓. Ti(CxN1-x)基金属陶瓷刀具材料的应用研发[J]. 中国材料进展, 2019, 38(8): 813-818.
WEN Xiao.Development and application of Ti(CxN1-x) based cermet[J]. Materials China, 2019, 38(8): 813-818.
[5] DIOS M, KRALEVA I, GONZÁLEZ Z, et al. Mechanical characterization of Ti(C,N)-based cermets fabricated through different colloidal processing routes[J]. Journal of Alloys and Compounds, 2018, 732: 806-817.
[6] XU Q Z, ZHAO J, AI X.Fabrication and cutting performance of Ti(C,N)-based cermet tools used for machining of high-strength steels[J]. Ceramics International, 2017, 43(8): 6286-6294.
[7] 王守文, 郑勇, 丁伟民, 等. Ti(C,N)固溶体的N/C原子比对Ti(C,N)基金属陶瓷组织及力学性能的影响[J]. 硬质合金, 2018, 35(2): 79-85.
WANG Shouwen, ZHENG Yong, DING Weimin, et al.Effect of N/C atom ratio of Ti(C,N) solid solution on microstructure and mechanical properties of Ti(C,N)-based cermet[J]. Cemented Carbide, 2018, 35(2): 79-85.
[8] ARCHANA M S, SRIKANTHB V V S S, JOSHI S V, et al. Influence of applied pressure during field-assisted sintering of Ti(C,N)-WC-FeAl based nanocomposite[J]. Ceramics International, 2015, 41(2): 1986-1993.
[9] 郑东海, 唐愈. 高熵合金CoCrFeNiTiAl粘结WC硬质合金的制备与研究[J]. 粉末冶金工业, 2022, 32(6): 16-20, 28.
ZHENG Donghai, TANG Yu.Preparation and research of high-entropy alloy CoCrFeNiTiAl bonded WC cemented carbide[J]. Powder Metallurgy Industry, 2022, 32(6): 16-20, 28.
[10] HUANG B, XIONG W H, YANG Q Q, et al.Preparation, microstructure and mechanical properties of multicomponent Ni3Al-bonded cermets[J]. Ceramics International, 2014, 40(9): 14073-14081.
[11] CHENG H, LIU X Q, TANG Q H, et al.Microstructure and mechanical properties of FeCoCrNiMnAlx high-entropy alloys prepared by mechanical alloying and hot-pressed sintering[J]. Journal of Alloys and Compounds, 2019, 775: 742-751.
[12] 温雪龙, 于兴晨, 巩亚东, 等. FeCoNiCrMo高熵合金磨削机理及表面粗糙度[J]. 东北大学学报(自然科学版), 2020, 41(2): 246-251.
WEN Xuelong, YU Xingchen, GONG Yadong, et al.Grinding mechanism and surface roughness of FeCoNiCrMo high-entropy alloy[J]. Journal of Northeastern University (Natural Science Edition), 2020, 41(2): 246-251.
[13] LI C, CHEN S H, WU Z W, et al.Development of high- strength WNbMoTaVZrx refractory high entropy alloys[J]. Journal of Materials Research, 2022, 37(9): 1664-1678.
[14] 杨静怡, 原一高, 张建国. CoCrFeNi基高熵合金熔体在碳化钨表面的润湿性能[J]. 东华大学学报(自然科学版), 2023, 49(1): 58-63, 69.
YANG Jingyi, YUAN Yigao, ZHANG Jianguo.Wettability of CoCrFeNi-based high-entropy alloy melt on the surface of tungsten carbide[J]. Journal of Donghua University (Natural Science Edition), 2023, 49(1): 58-63, 69.
[15] ZHU G, SUN S X, CHEN J L, et al.Enhanced mechanical properties of Ti(C,N)-based cermets with multi-component AlCoCrFeNi high-entropy alloys binder[J]. Key Engineering Materials, 2017, 727: 149-153.
[16] LIU B, WANG J S, CHEN J, et al.Ultra-high strength TiC/refractory high-entropy-alloy composite prepared by powder metallurgy[J]. Journal of Metals, 2017, 69(4): 651-656.
[17] ZHU G, LIU Y, YE J W.Early high-temperature oxidation behavior of Ti(C,N)-based cermets with multi-component AlCoCrFeNi high-entropy alloy binder[J]. International Journal of Refractory Metals and Hard Materials, 2014, 44: 35-41.
[18] FU Z Z, KOC R.Processing and characterization of TiB2-TiNiFeCrCoAl high-entropy alloy composite[J]. Journal of the American Ceramic Society, 2017, 100(7): 2803-2813.
[19] 刘美玲, 海万秀, 陈宇红. TiNbTaZrAl高熵合金黏结剂对Ti(C,N)基金属陶瓷性能的影响[J]. 中国有色金属学报, 2022, 32(5): 1360-1372.
LIU Meiling, HAI Wanxiu, CHEN Yuhong.Effect of TiNbTaZrAl high entropy alloy binder on properties of Ti(C,N)-based cermets[J]. The Chinese Journal of Nonferrous Metals, 2022, 32(5): 1360-1372.
[20] 刘咏, 曹远奎, 吴文倩, 等. 粉末冶金高熵合金研究进展[J]. 中国有色金属学报, 2019, 29(9): 2155-2184.
LIU Yong, CAO Yuankui, WU Wenqian, et al.Progress of powder metallurgical high entropy alloys[J]. The Chinese Journal of Nonferrous Metals, 2019, 29(9): 2155-2184.
[21] 江汉文, 俞星星, 薛名山, 等. 碳化硅在导热材料中的应用及其最新研究进展[J]. 南昌航空大学学报(自然科学版), 2021, 35(2): 51-60.
JIANG Hanwen, YU Xingxing, XUE Mingshan, et al.Application of silicon carbide in thermally conductive materials and its latest research progress[J]. Journal of Nanchang Hangkong University (Natural Science Edition), 2021, 35(2): 51-60.
[22] 刘倩, 陈思安, 潘勇. SiC/CVD SiC复合涂层的抗氧化及抗热震性能研究[J]. 宇航总体技术, 2021, 5(2): 39-48.
LIU Qian, CHEN Sian, PAN Yong.Study on oxidation resistance and thermal shock resistance of SiC/CVD SiC composite coating[J]. Aerospace Technology in General, 2021, 5(2): 39-48.
[23] JIA J H, BAI S X, XIONG D G, et al.Microstructure and ablation behaviour of a Cf/SiC-Al composite prepared by infiltrating Al alloy into Cf/SiC[J]. Journal of Alloys and Compounds, 2022, 895: 162430.
[24] 姜卓钰, 束小文, 吕晓旭, 等. SiC晶须增强SiCf/SiC复合材料的力学性能[J]. 材料工程, 2021, 49(8): 89-96.
JIANG Zhuoyu, SHU Xiaowen, LÜ Xiaoxu, et al.SiC whiskers enhance the mechanical properties of SiCf/SiC composites[J]. Materials Engineering, 2021, 49(8): 89-96.
[25] 姜卓钰, 吕晓旭, 周怡然, 等. PIP工艺制备SiC晶须增强SiCf/SiC复合材料的性能[J]. 航空材料学报, 2021, 41(2): 82-88.
JIANG Zhuoyu, LÜ Xiaoxu, ZHOU Yiran, et al.The performance of SiC whisker-reinforced SiCf/SiC composites was prepared by PIP process[J]. Journal of Aeronautical Materials, 2021, 41(2): 82-88.
[26] 孙国元, 刘超锋, 杨莉. 切削铸铁的复合刀具及涂层刀具[J]. 铸造技术, 2009, 30(9): 1188-1191.
SUN Guoyuan, LIU Chaofeng, YANG Li.Composite tools and coating tools for cutting cast iron[J]. Casting Technology, 2009, 30(9): 1188-1191.
[27] 蒋烨, 陈可, 王伟. 机械合金化法制备AlCoNiFeCr高熵合金涂层[J]. 中国有色金属学报, 2018, 28(9): 1784-1790.
JIANG Ye, CHEN Ke, WANG Wei.Preparation of AlCoNiFeCr high entropy alloy coating by mechanical alloying[J]. The Chinese Journal of Nonferrous Metals, 2018, 28(9): 1784-1790.
[28] SCHUBERT W D, NEUMEISTER H, KINGER G, et al.Hardness to toughness relationship of fine-grained WC-Co hardmetals[J]. International Journal of Refractory Metals and Hard Materials, 1998, 16(2): 133-142.
[29] 张楠楠, 郝德喜, 马永亮, 等. AlCoCrFeNiV高熵合金涂层制备及力学性能[J]. 沈阳工业大学学报, 2021, 43(6): 641-645.
ZHANG Nannan, HAO Dexi, MA Yongliang, et al.Preparation and mechanical properties of AlCoCrFeNiV high entropy alloy coating[J]. Journal of Shenyang University of Technology, 2021, 43(6): 641-645.
[30] XU X Y, ZHONG Y, ZHANG G T, et al.Effect of WC addition and cooling rate on microstructure, magnetic and mechanical properties of Ti(C0.6,N0.4)-WC-Mo-Ni cermets[J]. International Journal of Refractory Metals and Hard Materials, 2019, 84: 105001.
[31] PENG Y, PENG Z J, REN X Y, et al.Effect of SiC nano-whisker addition on TiCN-based cermets prepared by spark plasma sintering[J]. International Journal of Refractory Metals and Hard Materials, 2012, 34: 36-40.
[32] 龚涤凡, 李詠侠, 杨海林, 等. 纳米SiC对Ti(C,N)基金属陶瓷微观组织与性能的影响[J]. 粉末冶金材料科学与工程, 2020, 25(4): 321-329.
GONG Difan, LI Yongxia, YANG Hailin, et al.Nano-SiC addition on microstructure, mechanical properties and high temperature oxidation resistance of Ti(C,N)-based cermets[J]. Materials Science and Engineering of Powder Metallurgy, 2020, 25(4): 321-329.
[33] 许俊华, 曹峻, 喻利花. 磁控溅射制备TiCN复合膜的微结构与性能[J]. 中国有色金属学报, 2012, 22(11): 3123-3128.
XU Junhua, CAO Jun, YU Lihua.Microstructure and properties of TiCN composite films prepared by magnetron sputtering[J]. The Chinese Journal of Nonferrous Metals, 2012, 22(11): 3123-3128.
[34] 贾丛丛, 王恩青, 葛芳芳, 等. Si含量对CrSiN涂层结构和性能的影响[J]. 表面技术, 2016, 45(1): 62-68.
JIA Congcong, WANG Enqing, GE Fangfang, et al.Influence of Si content on structure and properties of CrSiN coatings[J]. Surface Technology, 2016, 45(1): 62-68.
[35] LUO W Y, LIU Y Z, LUO Y, et al.Fabrication and characterization of WC-AlCoCrCuFeNi high-entropy alloy composites by spark plasma sintering[J]. Journal of Alloys and Compounds, 2018, 754: 163-170.
[36] 刘兵, 张茜, 陈慧, 等. 亚微米级SiC颗粒对Ti(C,N)基金属陶瓷材料性能和结构的影响研究[J]. 粉末冶金技术, 2015, 33(3): 170-175.
LIU Bing, ZHANG Qian, CHEN Hui, et al.Study on the effect of sub-micro SiC particle on the properties and microstructure of Ti(C,N)-based cermet[J]. Powder Metallurgy Technology, 2015, 33(3): 170-175.
[37] HAI W X, CHEN H, LU J, et al.Tribological behavior of ZrB2-SiC composite with different tribo-pair[J]. Tribology, 2017, 37: 581-586.
[38] 肖琪聃, 吕振林, 于源. 熔渗烧结Ti3SiC2陶瓷材料的摩擦磨损性能研究[J]. 摩擦学学报, 2010, 30(4): 367-372.
XIAO Qidan, LÜ Zhenlin, YU Yuan.Friction and wear characteristics of Ti3SiC2 by infiltration sintering[J]. Tribology, 2010, 30(4): 367-372.
[39] 李巍, 吴名冬, 刘超, 等. TiCN基金属陶瓷的高温摩擦磨损性能研究[J]. 应用技术学报, 2021, 21(1): 37-40, 61.
LI Wei, WU Mingdong, LIU Chao, et al.Study on high temperature friction and wear properties of TiCN-based cermets[J]. Journal of Applied Technology, 2021, 21(1): 37-40, 61.