Home   |   About Journal   |   Editorial Board   |   Instruction   |   Subscriptions   |   Contacts Us   |   中文

Materials Science and Engineering of Powder Metallurgy >

2023 , Vol. 28 >Issue 1: 55 - 62

DOI: https://doi.org/10.19976/j.cnki.43-1448/TF.2022078

Engineering and Technology

Effects of Cr3C2 content on microstructure and mechanical properties of hot-pressed sintered WC based cemented carbides

  • 袁玉兰，刘含莲，黄传真，刘洋，王利梅，季良刚
Expand
  • 1. School of Mechanical Engineering, Shandong University, Jinan 250061, China;
    2. Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Ministry of Education, Center for Advanced Jet Engineering Technologies (CaJET), Shandong University, Jinan 250061, China;
    3. School of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China;

Received date: 2022-10-11

  Revised date: 2022-12-09

  Online published: 2023-03-23

Fold

Abstract

In order to develop cemented carbide tool materials with high strength and high hardness, WC-based cemented carbides with different Cr3C2 contents were prepared by vacuum hot-pressed sintering technology. The phase compositions and microstructures of the WC-based cemented carbides were studied by XRD, SEM, and EDS. The effect of Cr3C2 content on the mechanical properties and microstructures of WC-based cemented carbide were investigated as well. The results show that appropriate amount of Cr3C2 can effectively inhibit the abnormal growth of WC grains, improve grain uniformity, reduce microstructure defects, and improve its comprehensive mechanical properties. With the increase of Cr3C2 content, the hardness and bending strength of the alloys increase firstly and then decrease, and the fracture toughness first decreases and then increases. When the mass fraction of Cr3C2 is 0.4%, the WC based cemented carbide has the best comprehensive mechanical properties, with the hardness (HV) of

Cite this article

袁玉兰，刘含莲，黄传真，刘洋，王利梅，季良刚 . Effects of Cr3C2 content on microstructure and mechanical properties of hot-pressed sintered WC based cemented carbides[J]. Materials Science and Engineering of Powder Metallurgy, 2023 , 28(1) : 55 -62 . DOI: 10.19976/j.cnki.43-1448/TF.2022078

References

[1] 李亚军, 栾道成, 王正云, 等. 晶粒长大抑制剂对超细WC-9%Co硬质合金性能的影响[J]. 硬质合金, 2011, 28(5): 288-293.
LI Yajun, LUAN Daocheng, WANG Zhengyun, et al.Effects of grain growth inhibitors on properties of ultra-fine WC-9%Co cemented carbides[J]. Cemented Carbide, 2011, 28(5): 288-293.
[2] SUN L, YANG T, JIA C, et al.VC, Cr3C2 doped ultrafine WC-Co cemented carbides prepared by spark plasma sintering[J]. International Journal of Refractory Metals and Hard Materials, 2011, 29(2): 147-152.
[3] POETSCHKE J, RICHTER V, HOLKE R.Influence and effectivity of VC and Cr3C2 grain growth inhibitors on sintering of binderless tungsten carbide[J]. International Journal of Refractory Metals and Hard Materials, 2012, 31: 218-223.
[4] 娄静, 易健宏, 周承商. 微波烧结WC-Co硬质合金致密化与晶粒生长[J]. 中国有色金属学报, 2012, 22(7): 1976-1983.
LOU Jing, YI Jianhong, ZHOU Chengshang.Densification and grain growth of microwave sintered WC-Co cemented carbide[J]. The Chinese Journal of Nonferrous Metals, 2012, 22(7): 1976-1983.
[5] 林信平, 曹顺华, 李炯义. 纳米硬质合金烧结技术进展[J]. 稀有金属与硬质合金, 2004(1): 40-45.
LIN Xinping, CAO Shunhua, LI Jiongyi.Development of sintering methods for nano-structured cemented carbide[J]. Rare Metals and Cemented Carbides, 2004(1): 40-45.
[6] KRUTH J P, MERCELIS P, VAN VAERENBERGH J, et al.Binding mechanisms in selective laser sintering and selective laser melting[J]. Rapid Prototyping Journal, 2005, 11(1): 26-36.
[7] 吴鹏, 温德才, 刘少存, 等. Cr3C2含量对纳米WC-6Co复合粉烧结的影响[J]. 闽南师范大学学报(自然科学版), 2016, 29(1): 70-75.
WU Peng, WEN Decai, LIU Shaocun, et al.Effect of Cr3C2 addition on the sintering of nano WC-6Co powder[J]. Journal of Minnan Normal University (Nature Science), 2016, 29(1): 70-75.
[8] SUN L, JIA C, CAO R, et al.Effects of Cr3C2 additions on the densification, grain growth and properties of ultrafine WC-11Co composites by spark plasma sintering[J]. International Journal of Refractory Metals and Hard Materials, 2008, 26(4): 357-361.
[9] 唐启佳, 李重典, 王雁洁, 等. Cr3C2添加量对WC-10Co硬质合金组织与性能的影响[J]. 粉末冶金材料科学与工程, 2018, 23(5): 460-466.
TANG Qijia, LI Zhongdian, WANG Yanjie, et al.Effect of the Cr3C2 additive amount on the microstructure and properties of WC-10Co cemented carbides[J]. Materials Science and Engineering of Powder Metallurgy, 2018, 23(5): 460-466.
[10] 张守全. 碳含量对WC-10Co-0.6Cr3C2硬质合金组织结构与性能的影响[J]. 粉末冶金材料科学与工程, 2014, 19(3): 446-450.
ZHANG Shouquan.Effect of carbon content on microstructure and properties of WC-10Co-0.6Cr3C2 cemented carbide[J]. Materials Science and Engineering of Powder Metallurgy, 2014, 19(3): 446-450.
[11] 孙文文, 栾道成, 包帅, 等. Cr3C2抑制剂含量对WC- 8%Co-0.5%(VC/Cr3C2)超细硬质合金性能的影响[J]. 热加工工艺, 2018, 47(16): 70-73.
SUN Wenwen, LUAN Daocheng, BAO Shuai, et al.Study on effects of Cr3C2inhibitor content on properties of WC-8%Co-0.5%(VC/Cr3C2) ultrafine cemented carbide[J]. Hot Working Technology, 2018, 47(16): 70-73.
[12] 韩小伟, 夏小群. VC含量对WC-12%Co硬质合金性能的影响[J]. 装备制造技术, 2017(1): 106-108.
HAN Xiaowei, XIA Xiaoqun.Effect of VC content on properties of WC-12%Co cemented carbide[J]. Equipment Manufacturing Technology, 2017(1): 106-108.
[13] 张岩, 王洪福, 何泠, 等. Co+Ni, TiC+TaC对WC-Co基硬质合金硬度的影响[J]. 粉末冶金工业, 2017, 27(1): 27-30.
ZHANG Yan, WANG Hongfu, HE Ling, et al.Effects of (Co+Ni), (TiC+TaC) on hardness of WC-Co based cemented carbide[J]. Powder Metallurgy Industry, 2017, 27(1): 27-30.
[14] XIAO D H, HEY H, SONG M, et al.Y2O3- and NbC- doped ultrafine WC-10Co alloys by low pressure sintering[J]. International Journal of Refractory Metals and Hard Materials, 2010, 28(3): 407-411.
[15] 王冲. 纳米复合WC-Co材料的低压烧结与晶粒生长抑制机理研究[D]. 武汉: 武汉理工大学, 2005.
WANG Chong.Sinter-HIPing process & mechanism of inhibiting crystal growth in nanocomposite WC-Co materials[D]. Wuhan: Wuhan University of Technology, 2005.
[16] 陈健, 弓满锋, 刘伟, 等. 添加TiC和Cr3C2对超细WC-8Co硬质合金微观结构和性能的影响[J]. 人工晶体学报, 2015, 44(5): 1336-1341.
CHEN Jian, GONG Manfeng, LIU Wei, et al.Effect of TiC and Cr3C2 addition on microstructures and properties of ultrafine WC-8Co cemented carbides[J]. Journal of Synthetic Crystals, 2015, 44(5): 1336-1341.
[17] BONACHE V, SALVADORM D, FERNANDEZ A, et al.Fabrication of full density near-nanostructured cemented carbides by combination of VC/Cr3C2 addition and consolidation by SPS and HIP technologies[J]. International Journal of Refractory Metals and Hard Materials, 2011, 29(2): 202-208.
[18] 张雪辉, 黄柱, 徐畅, 等. Cr3C2对SPS烧结WC-6Co硬质合金组织与性能的影响[J]. 中国有色金属学报, 2017, 27(8): 1580-1588.
ZHANG Xuehui, HUANG Zhu, XU Chang, et al.Cr3C2 on SPS sintered WC-6Co cemented carbide effect of structure and performance[J]. The Chinese Journal of Nonferrous Metals, 2017, 27(8): 1580-1588.
[19] 李亚军, 栾道成, 王正云, 等. 烧结工艺对超细WC- 6%Co-0.6%(VC/Cr3C2/TaC)硬质合金性能的影响[J]. 硬质合金, 2012, 29(1): 24-28.
LI Yajun, LUAN Daocheng, WANG Zhengyun, et al.Effects of sintering process on performance of ultrafine WC- 6%Co-0.6%(VC/Cr3C2/TaC) cemented carbide[J]. Cemented Carbide, 2012, 29(1): 24-28.
[20] 马青龙, 陈名海, 刘宁, 等. Cr3C2添加量对WC-12%Co超细硬质合金组织和性能的影响[J]. 硬质合金, 2019, 36(1): 29-37.
MA Qinglong, CHEN Minghai, LIU Ning, et al.Effect of Cr3C2 content on microstructure and properties of ultra-fine WC-12%Co cemented carbides[J]. Cemented Carbide, 2019, 36(1): 29-37.
[21] 夏艳萍, 余怀民, 魏修宇, 等. 添加Cr3C2对WC-Co硬质合金微观组织和性能的影响[J]. 硬质合金, 2017, 34(5): 300-305.
XIA Yanping, YU Huaimin, WEI Xiuyu, et al.Effect of Cr3C2 addition on microstructurs and properties of WC-Co cemented carbides[J]. Cemented Carbide, 2017, 34(5): 300-305.
Options
Outlines

/

〈 〉

Copyright © Editorial Board of Materials Science and Engineering of Powder Metallurgy
Tel: 0731-88877163　E-mail: pmbjb@csu.edu.cn
Supported by: Beijing Magtech