[1] AWAD A, FINA F, GOYANES A, et al.Advances in powder bed fusion 3D printing in drug delivery and healthcare[J]. Advanced Drug Delivery Reviews, 2021, 174: 406-424.
[2] WU H, FAHY W P, KIM S, et al.Recent developments in polymers/polymer nanocomposites for additive manufacturing[J]. Progress in Materials Science, 2020, 111: 100638.
[3] YUAN S, SHEN F, CHUA C K, et al.Polymeric composites for powder-based additive manufacturing: materials and applications[J]. Progress in Polymer Science, 2018, 91: 141-168.
[4] YUAN L.Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: a review[J]. Bioactive Materials, 2021, 6(6): 1789-1789.
[5] AWAD A, FINA F, GOYANES A, et al.3D printing: Principles and pharmaceutical applications of selective laser sintering[J]. International Journal of Pharmaceutics, 2020, 586: 119594.
[6] TIWARI S K, PANDE S, BOBADE S M, et al.Assessment of mechanical properties and flammability of magnesium oxide/PA12 composite material for SLS process[J]. Rapid Prototyping Journal, 2019, 25(1): 176-186.
[7] CRAFT G, NUSSBAUM J, CRANE N, et al.Impact of extended sintering times on mechanical properties in PA-12 parts produced by powderbed fusion processes[J]. Additive Manufacturing, 2018, 22: 800-806.
[8] WANG Y, XU Z, WU D, et al.Current status and prospects of polymer powder 3D printing technologies[J]. Materials, 2020, 13(10): 2406.
[9] CHEN A, WU J, LIU K, et al.High-performance ceramic parts with complex shape prepared by selective laser sintering: a review[J]. Advances in Applied Ceramics, 2018, 117(2): 100-117.
[10] BRIGHENTI R, COSMA M P, MARSAVINA L, et al.Laser-based additively manufactured polymers: a review on processes and mechanical models[J]. Journal of Materials Science, 2020, 56(2): 961-998.
[11] YANG X, WEI Y, XI S, et al.Preparation of spherical polymer powders for selective laser sintering from immiscible PA12/PEO blends with high viscosity ratios[J]. Polymer, 2019, 172: 58-65.
[12] RUI HONG, ZHAO Z, LENG J, et al.Two-step approach based on selective laser sintering for high performance[J]. Composites Part B Engineering, 2019, 176: 107214.
[13] SHARMA V, SINGH J, SHARMA V S, et al.Investigations on mechanical properties of polyamide parts fabricated by selective laser sintering process[J]. Journal of Materials Engineering and Performance, 2022, 31: 5767-5781.
[14] KIM J, CHUN D-M, PARK H W, et al.Waterproof and wear-resistant surface treatment on printed parts of polyamide 12 (PA12) by selective laser sintering using a large pulsed electron beam[J]. International Journal of Precision Engineering and Manufacturing-Green Technology, 2022, 26: 210-223.
[15] CHABAUD G, CASTRO M, DENOUAL C, et al.Hygromechanical properties of 3D printed continuous carbon and glass fibre reinforced polyamide composite for outdoor structural applications[J]. Additive Manufacturing, 2019, 26: 94-105.
[16] HOLMSTRÖM P H, HOPPERSTAD O S, CLAUSEN A H. Anisotropic tensile behaviour of short glass-fibre reinforced polyamide-6[J]. Composites Part C: Open Access, 2020, 2: 100019.
[17] CONNOR H, DOWLING D P.Comparison between the properties of polyamide 12 and glass bead filled polyamide 12 using the multi jet fusion printing process[J]. Additive Manufacturing, 2020, 31: 100961.
[18] GÜLLÜ A, ÖZDEMIR A, ÖZDEMIR E. Experimental investigation of the effect of glass fibres on the mechanical properties of polypropylene (PP) and polyamide 6 (PA6) plastics[J]. Materials and Design, 2006, 27(4): 316-323.
[19] RAVI N, SHANMUGAM M, BHEEMAPPA S, et al.Influence of reinforcement on tribological properties of friction stir welded glass fiber reinforced polyamide 66[J]. Journal of Manufacturing Processes, 2020, 58: 1052-1063.
[20] CANO A J, SALAZAR A, RODRíGUEZ J. Effect of temperature on the fracture behavior of polyamide 12 and glass-filled polyamide 12 processed by selective laser sintering[J]. Engineering Fracture Mechanics, 2018, 23: 66-80.
[21] NEGI S, DHIMAN S, SHARMA R K.Determining the effect of sintering conditions on mechanical properties of laser sintered glass filled polyamide parts using RSM[J]. Measurement, 2015, 68: 205-218.
[22] XU J, WU Y, WANG L, et al.Compressive properties of hollow lattice truss reinforced honeycombs (honeytubes) by additive manufacturing: patterning and tube alignment effects[J]. Materials and Design, 2018, 156: 446-457.
[23] KHALKHALI Z, RAJAN K S, ROTHSTEIN J P.Peening effect of glass beads in the cold spray deposition of polymeric powders[J]. Journal of Thermal Spray Technology, 2020, 29(4): 657-669.
[24] LIU Y, ZHU L, ZHOU L, et al.Microstructure and mechanical properties of reinforced polyamide 12 composites prepared by laser additive manufacturing[J]. Rapid Prototyping Journal, 2019, 25(6): 1127-1134.
[25] CANO A J, SALAZAR A, RODRíGUEZ J. Effect of temperature on the fracture behavior of polyamide 12 and glass-filled polyamide 12 processed by selective laser sintering[J]. Engineering Fracture Mechanics, 2018, 203: 66-80.
[26] MOUSA A A, PHAM D T, SHWE S P.Pre-processing studies for selective laser sintering of glass beads-filled polyamide 12 composites[J]. International Journal of Rapid Manufacturing, 2014, 4(1): 28-48.
[27] GUO B, XU Z, LUO X, et al.A detailed evaluation of surface, thermal, and flammable properties of polyamide 12/glass beads composites fabricated by multi jet fusion[J]. Virtual and Physical Prototyping, 2021, 16(Supp1): S39-S52.
[28] CAULFIELD B, MCHUGH P E, LOHFELD S.Dependence of mechanical properties of polyamide components on build parameters in the SLS process[J]. Journal of Materials Processing Technology, 2007, 182(1/3): 477-488.
[29] BAI J, SONG J, WEI J.Tribological and mechanical properties of MoS2 enhanced polyamide 12 for selective laser sintering[J]. Journal of Materials Processing Technology, 2019, 264: 382-388.